January 23, 2013, 03:24 PM | #1 |
Member
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
|
Blackpowder by volume?
In an earlier thread, it was mentioned that blackpowder was measured by volume. I am really confused, as a grain is a measure of weight. At least, what I've read.
What is the correct way to measure it , then? Thanks in advance for any help. Pat |
January 23, 2013, 03:32 PM | #2 | |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
You are correct. However ...
Quote:
BP and replacement propellants, are very forgiving and not much is lost by being a few grains off either way. Where in smokless, being off a littls, can be dangerous. ...... Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
|
January 23, 2013, 03:34 PM | #3 |
Senior Member
Join Date: March 7, 2008
Location: central Illinois
Posts: 451
|
Most black powder is measured in the field volumetrically. The volume measures are marked, based on an average grain weight per that volume.
There are problems in using a scale to measure black powder at home. Not the least of which is the possibility of a static electric spark setting it off. Black powder is FAR more easily ignited than smokless powder
__________________
Mark Lane to William Buckley: "Have you ever referred to Jessee Jackson as an ignoramus?" Buckley: "If I didn't, I should have" |
January 23, 2013, 03:46 PM | #4 | |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
Quote:
I don't think I have ever loaded a .38-55 or .40-65 for BPCR target shooting with a powder charge not prepared in the manner recommended by the Sharps Rifle Co, prior to 1881: "For fine shooting, powder should be weighed on a scale." |
|
January 23, 2013, 03:57 PM | #5 |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
Yes, blackpowder is always measured by volume instead of by weight. pahoo is correct in saying the bp and the subs are very forgiving and volume measurments are really convenient in the field. If you want to get into the density of the subs versus real bp, and the real technical reasons for measuring by volume, there are guys on here that can explain in detail. If you really want to dig into it, google "ffg to fffg conversion" and you'll find some really detailed threads about volume to weight conversions.
__________________
Beware the man with one gun, he knows how to use it |
January 23, 2013, 04:00 PM | #6 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
Actual blackpowder is pretty much volume =weight.
However there are substitutes & so on that both have a different density, & some even need a slightly reduced charge to run safely. Now if this was just a couple of percent, it'd be no big deal, but if you measure, for example 50 Gr by volume of real FFg, & then the same volume of Pyrodex, or Jim Shockey's the difference when weighed will be about 60%. Thats a significant change, even with the more forgiving black powder as opposed to modern propellants. Now add the suggested 15% reduction for triple-7 & combine them & you have the potential for a 56% overload! Some kind of standard was needed & volume was what was chosen. I guess you could remove confusion by saying its the volume equivalent of a weighed FFg charge.
__________________
Allan Quatermain: “Automatic rifles. Who in God's name has automatic rifles”? Elderly Hunter: “That's dashed unsporting. Probably Belgium.” |
January 23, 2013, 04:08 PM | #7 |
Member
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
|
Thanks for the clear and concise, yet still confusing information!
So, what tool , in the field, would I use to measure? At home, I've got a powder scale. What I've noticed is that it seems like a LOT of powder for say, 80 grains. I am NEW at this so please bear with me. I am using a Lyman Deerstalker Percussion cap gun.. 295 grain Powerbelt bullets, Pyrodex RS powder and #11 caps. I thought I would start with 80 grains, looking at the charts in Lymans blackpowder manual. I weighed that on my trusty Lyman digital scale. I took that amount and put it into a brass powder measure from TC... that 80 grains on the sliding scale on the powder measure reads 115 "somethings". It just seems to me that that's a LOT of darn powder. So, again, thanks for all the help. Please don't stop! Pat |
January 23, 2013, 04:15 PM | #8 | |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
Just take care !!!
Quote:
I know a guy that routinely smokes when he reloads and I try to schedule my visits around those times. ... Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
|
January 23, 2013, 04:47 PM | #9 | |
Senior Member
Join Date: June 20, 2007
Location: Rainbow City, Alabama
Posts: 7,167
|
Quote:
2nd. For field use (I assume you are talking about hunting), don't try and do any measuring in the field. Get a few plastic speed load containers (like this http://www.grafs.com/retail/catalog/...roductId/18296 ). They hold one charge of powder, one bullet/sabot, and one primer. When I'm hunting, I carry the load that is in my gun plus 3 of the pre-made speed loads. |
|
January 23, 2013, 04:49 PM | #10 |
Senior Member
Join Date: April 20, 2009
Location: High Desert Mountains CA.
Posts: 410
|
I am measuring with a brass powder measure....Always have done it by volume...
|
January 23, 2013, 04:53 PM | #11 |
Member
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
|
thanks very much. I appreciate all the help.
So far, using pellets has worked for me. But I want to use Pyrodex RS, and want to not use too much! |
January 23, 2013, 05:13 PM | #12 |
Senior Member
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,393
|
Been shooting Black Powder for over 50 years. Always weigh on a scale.
|
January 23, 2013, 05:17 PM | #13 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Real black can be weighed. Subs must be measured by volume. Static electricity won't set bp off.
|
January 23, 2013, 05:52 PM | #14 |
Senior Member
Join Date: September 7, 2012
Location: Crockett, Texas
Posts: 363
|
and ifn you make yur own b.p. unless you compress it and grind it down, it is fluffier than storebought, so you have to go by weight.
__________________
"I'm your huckleberry, it's just my game" |
January 23, 2013, 06:58 PM | #15 |
Member
Join Date: January 20, 2013
Location: Fredericksburg Va.
Posts: 90
|
WOW
WOW what a newbie can learn from these posts. Absolutely amazing. I'm not sure I understand all of it but its starting to become clearer to me. Thanks for the great info.
|
January 23, 2013, 07:47 PM | #16 |
Member
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
|
jspapapp: it's great , isn't it? You get to learn by my confusion, and "crises", and then later on, we can help others as well.
|
January 23, 2013, 08:12 PM | #17 |
Senior Member
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 2,603
|
Real black powder can be weighed or measured volumetrically with a powder measure calibrated in grains.
It's the substitutes that must be measured volumetrically, because when they say "max load is xx grains", they don't mean it literally. They mean the amount of black powder substitute measured by a black powder measure set to xx grains. The weight amount will be considerably lower. All the black powder substitutes are less dense than black powder so 100 grains by volume might only be 70 grains by weight more or less depending on exactly which sub you are using. There's nothing wrong with using a scale to measure out precise amounts of subs as long as you remember they don't mean xx grains literally, in fact, BH 209 loads for cartidges are given by weight while the loads for muzzleloaders are listed by volume. |
January 23, 2013, 08:55 PM | #18 |
Member
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
|
So, if I've got this right, it's an EQUIVALENT volume compared to what real black powder would weigh. Not the same mass, but the same volume.
It takes some thinking, but I think I have it. By George, I've got it. I think. |
January 23, 2013, 09:20 PM | #19 | |
Senior Member
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 2,603
|
Quote:
And just to add to the confusion, the shotgun shooters often specify their powder charges by "ounces", again not literally. When they say "I shoot 1 1/4 ounce shot and 1 1/4 ounce of powder", what they mean is that they use a shot dipper set to measure 1 1/4 ounces of lead shot to measure their powder charge. A lot of them don't even know their powder charge in grains. But then, the ml shotgun crowd has always been a little touched in the head |
|
January 23, 2013, 09:39 PM | #20 | |
Member
Join Date: December 7, 2011
Location: Colorado Springs, CO
Posts: 95
|
Quote:
Cool! Sounds like I belong over there! |
|
January 23, 2013, 09:42 PM | #21 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
I'm new to this Muzzle Loading also.
I went to Cabalas and got a bunch of those little plastic tubes with scales for "grains of BP". On my TC Omega I use right at 100 grs. but by volume. I took one of those plastic tubes and filled it with BP to the 100 gr mark. Then I filled one with Pyrdex, the with Triple 7, all to the 100 grn mark. Then I weighed them. It took different weights to make up the same volume. BUT when I ran them through the crony, they all had about the same velocity and impacted about the same place on target. Then when I tried loading by weight instead of volume, I got all kinds of variations. (That wont work with smokeless powder). Anyway I decided to stick with volume. I just pre-measure a bunch of load in those plastic tubes (mentioned above) and I'm all set. But like I said, I'm new to ML, so take what I say with a grain of salt. Go see what your own experiments come up with.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
January 23, 2013, 09:50 PM | #22 | |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
The learning curve !!
Quote:
I'm excluding, loading of BP cartidges but everything else, I load by volume. . Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
|
January 23, 2013, 11:01 PM | #23 |
Senior Member
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 2,603
|
I think some folk work up a load by increasing the charge in 5 grain increments until shooting the gun sets off car alarms in the parking lot and then back off 5 grains.
|
January 23, 2013, 11:09 PM | #24 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Quote:
|
|
January 24, 2013, 08:59 AM | #25 | |
Senior Member
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
|
Quote:
__________________
Beware the man with one gun, he knows how to use it |
|
Tags |
grain , measuring blackpowder , new guy , volume |
|
|