|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
December 29, 2013, 12:04 AM | #1 |
Senior Member
Join Date: December 28, 2009
Location: North Central Illinois
Posts: 2,710
|
How long will lead bullets last?
I found 1500 pieces of .452, 200gr LSWC bullets that, as best I can remember, are 7 to 8 years old. The wax / lube in the bullet’s groove looks fine, but is it?
Kind of tells you how often I clean my gun room. When I first found them I was like a little kid on Christmas morning. But now reality is setting in and I’m wondering if these will even be usable. Last edited by Mike38; December 29, 2013 at 09:53 AM. |
December 29, 2013, 12:11 AM | #2 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,535
|
I loaded some of about that age yesterday.
The lead doesn't age and the lube was in the groove. Carry on. |
December 29, 2013, 12:22 AM | #3 |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
|
If the lube isn't crumbling, and the bullets aren't covered in powdery oxides, you're good to go.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
December 29, 2013, 07:22 AM | #4 | |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
Quote:
|
|
December 29, 2013, 07:31 AM | #5 | |
Senior Member
Join Date: December 24, 2010
Location: Central Louisiana
Posts: 3,137
|
Quote:
|
|
December 29, 2013, 08:50 AM | #6 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
Drop them in the pot and re-melt them
Why?
__________________
It was a sad day when I discovered my universal remote control did not in fact control the universe. Did you hear about the latest study.....5 out of 6 liberals say that Russian Roulette is safe. |
December 29, 2013, 09:33 AM | #7 |
Senior Member
Join Date: September 28, 2008
Posts: 10,442
|
At typical handgun velocities, the condition of lead bullets might not be as important as we think.
As an example, we had our basement flood years ago, and, wouldn't ya' know it, the water had come up exactly to the shelf where my bullets were stored. I was shooting both 9mm and .45acp at the time. Most of the bullets were covered with a whitish coating, with some gaps in the wax lube. Some had no lube left in the grooves at all, just a coating of wax slurry. Being desperate for rounds for the weekends upcoming match, I had no choice but to load up about 150 and hope for the best. So, I wiped the bullets with a rag and made enough rounds for the match. There seemed to be no problem with their performance; no loss of accuracy and barely any increase in barrel leading. Very surprising, to say the least. I used the rest up, during the next few months without further thought.
__________________
Walt Kelly, alias Pogo, sez: “Don't take life so serious, son, it ain't nohow permanent.” |
December 29, 2013, 03:17 PM | #8 |
Senior Member
Join Date: September 2, 2012
Location: N.central Pa.
Posts: 302
|
Use em up. I guarantee you, if I had them, they wouldn't last long at all.
__________________
Gun control means: Being able to hit what you are shooting at. |
December 29, 2013, 04:23 PM | #9 | |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
|
Quote:
Handling them in areas where children or pregnant women may be exposed to the dust is particularly bad.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
|
December 30, 2013, 07:46 AM | #10 | |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
Quote:
|
|
December 30, 2013, 10:00 AM | #11 |
Senior Member
Join Date: August 8, 2012
Posts: 2,556
|
You melt them back down in a pot on a furnace, like they were made in the first place. Probably wearing a big giant filtration mask and gloves to be safe, but mildly overcautious.
You tube How-to Review of one brand's lead furnace for educational, not marketing uses. This video will give you an idea of how it's done, but this is in no way an endorsement of that brand, person, etc etc. ETA: Here's a probably better video as the guy actual melts lead... Another video. |
December 30, 2013, 11:01 AM | #12 |
Senior Member
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
|
I have a bunch of CW minie dig-ups. They are covered in white oxide but otherwise can be shot just fine. I gave some to a friend and he shot one, worked like new.
|
December 30, 2013, 03:58 PM | #13 | |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,424
|
Quote:
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
|
December 30, 2013, 08:15 PM | #14 |
Senior Member
Join Date: May 27, 2007
Posts: 5,261
|
I just did a quick search and can't find a number, but I will bet that lead sulfide is harder than lead and might scratch things.
__________________
If I'm not shooting, I'm reloading. |
Thread Tools | Search this Thread |
|
|