January 30, 2012, 11:03 AM | #1 |
Junior Member
Join Date: January 27, 2012
Posts: 11
|
lc9 explosions video
Here is a quick video of the damage done to my Ruger LC9. It blew out the shell extractor system. This may or may not be my own fault due to the fact that I was using hand loaded ammo. However I have seen this happen to others using factory ammo.
http://www.youtube.com/watch?v=2YwPu..._order&list=UL Hope you enjoy
__________________
"From my cold dead hands" |
January 30, 2012, 11:21 AM | #2 |
Senior Member
Join Date: October 14, 2009
Location: Sunshine and Keystone States
Posts: 4,461
|
Couple of issues I can see here...
1) Labeling your handloads as "powerfull reloaded ammo" is not really correct - point is, they were wrongly loaded. By the way, "powerful" only has one "l". 2) If I had a case of blown out/missing parts, I would sure send the gun back to Ruger for repair. There may be cracks in other parts that you can't even see, rendering the gun unsafe to shoot with even the proper ammo. Edit - would you care to share the load you used - powder name, quantity and bullet weight? Last edited by spacecoast; January 30, 2012 at 11:37 AM. |
January 30, 2012, 11:24 AM | #3 |
Senior Member
Join Date: September 15, 2010
Posts: 1,850
|
You damaged your pistol due to "powerful" handloads. Shame on you. Is there a point to your post?
You have seen this happen to others using factory ammo? What ammo? Pictures? I can't help but be a little skeptical.
__________________
"Any fool can criticize, condemn and complain and most fools do." Benjamin Franklin |
January 30, 2012, 11:39 AM | #4 |
Staff
Join Date: September 27, 2008
Location: Foothills of the Appalachians
Posts: 13,059
|
The information could have been conveyed in a more concise manner by posting a few pictures and a few lines of text here than directing us to watch a video of a few pictures and a few lines of text.
__________________
Sometimes it’s nice not to destroy the world for a change. --Randall Munroe |
January 30, 2012, 11:47 AM | #5 |
Senior Member
Join Date: June 5, 2011
Posts: 801
|
The honesty that you used your own reloads, possibly "powerful" ones is good. Some less than honest folks may have blamed the gun. Everybody makes a mistake, but the small group is those that will admit it.
|
January 30, 2012, 01:15 PM | #6 | |
Senior Member
Join Date: April 3, 2011
Posts: 2,088
|
Quote:
Live and learn. |
|
January 30, 2012, 01:31 PM | #7 |
Junior member
Join Date: June 27, 2011
Location: Memphis TN
Posts: 694
|
LOL
that aint nuthin...I split the slide a few days ago on my 22.......Dems a powerfull little bullets too |
January 30, 2012, 01:34 PM | #8 | |
Senior Member
Join Date: May 11, 2009
Location: Phoenix
Posts: 4,580
|
Quote:
__________________
Handguns: 2x Glock 19.4 | Glock 26.4 | HK USP 9 | HK P2000 | HK VP9 SK | HK P30 | CZ Shadow 2 | CZ P-10 C | CZ P-07 | CZP-01 | S&W 360PD Rifles: DDM4 | SGL 21 | SAM7K | Draco | PSA PDW SBR | ASA Side-Charger SBR | CZ Scorpion K SBR | Aero M4E1 9" 300blk SBR | Angstadt Jack9 SBR | Savage Mark II FV-SR Shotguns: Mossberg 590A1 20" SP | Mossberg Shockwave |
|
January 30, 2012, 01:43 PM | #9 | |
Senior Member
Join Date: March 28, 2011
Posts: 600
|
Quote:
Is that one of those .22 cal 1911s? |
|
January 30, 2012, 02:19 PM | #10 |
Junior Member
Join Date: January 27, 2012
Posts: 11
|
point to my post..??
I just got to speak to Rugers repair center,(jan 30th @ 1:10 pm) they were great! First I gave them my load data and they say that is fine to use in this gun! They also said they are seeing this from other people as well. (I did not ask how many)
I guess you now know what the purpose of my post is...It can and has happened to other people who shared. Thanx for commenting on my truthfulness. My spelling sux. sory. I am in texting lingo mode. Search the forums if you want and you will find the other posts in these forums that made me join the site a few days ago. I was skeptical too until I read forums and talked to the factory. Ruger customer service said that they are very sure that this repair is safe for me to do and there will be no other issues. It's just easier to provide the link so I can post it quickly on multiple places on the net and it brings you to a place where I have other videos as well. The load was correctly loaded and I thought I caused this because the load was at higher pressure than most of the loads on the Hogdgon recommended load Chart, but below the never exceed load. load info. is 125grn fmj .355 Hodgdon universal powder 4.3grns oal 1.090 Hope I answered you all. If not ask again. It's nice to know I was in the right after it all.
__________________
"From my cold dead hands" |
January 30, 2012, 02:50 PM | #11 |
Senior Member
Join Date: April 3, 2011
Posts: 2,088
|
uncle malice - you are so right sir!
I guess that really makes Ruger one of the best in Customer Service. |
January 30, 2012, 03:01 PM | #12 |
Junior Member
Join Date: January 27, 2012
Posts: 11
|
You are right..
I will be editing the video, but I just paid for the parts anyway. 17 bucks instead of 6-8 weeks for repair.
What is that .22 ?
__________________
"From my cold dead hands" |
January 30, 2012, 05:43 PM | #13 |
Senior Member
Join Date: November 20, 2008
Posts: 11,132
|
I looked at the video - saw the slide and the parts. But, I can't tell exactly what broke. What part failed?
|
January 30, 2012, 06:26 PM | #14 |
Junior Member
Join Date: January 27, 2012
Posts: 11
|
Brken parts.
The broken parts were the shell extractor and the plunger and spring.
__________________
"From my cold dead hands" |
January 30, 2012, 10:01 PM | #15 |
Senior Member
Join Date: November 19, 2009
Posts: 3,287
|
Hmmm . . . offhand, I'd say this is akin to buying a new car and then driving it through the woods at night to see if you can get through without any damage . . . .
The OP states that he was using possibly powerful reloads in it that may have caused the damage . . . I have to give him credit for at least being honest . . . "Common sense" comes to mind . . . oh yea, I forgot . . . not too many folks have it anymore . . . I have to wonder what would have happened if the shooter of this pistol had lost a couple of fingers from the mishap? All I can say is that I'm glad I wasn't standing nearby at a range with pistol parts flying by because too "powerful" of reloads were being shot. Like one poster mentioned . . . I'd like to see the photos and articles that the OP mentioned about having seen the same thing happen with factory ammo . . . . we're waiting . . . .
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63 |
January 31, 2012, 09:38 AM | #16 |
Junior Member
Join Date: January 27, 2012
Posts: 11
|
Same thing happened
My update that people are not reading is that Ruger told me the load I was using was fine and not the cause. I have posted the load and you can feel free to read it. Ruger told me that the extractor on this gun is an "external extractor type" and that they have seen more of these same problems. They said "sometimes the ejector is not totally seated in the groove at the factory".
Here is what I found on the board that caught my attention when this first happened. One gentleman said he was hit by pieces of the gun when it blew up. http://thefiringline.com/forums/showthread.php?t=452436 Thank You for your input.
__________________
"From my cold dead hands" |
January 31, 2012, 10:46 AM | #17 |
Senior Member
Join Date: November 20, 2008
Posts: 11,132
|
I think its a bit of a stretch saying a gun "blew up" when a few small parts flew off. That's a far cry from a true KABOOM.
|
January 31, 2012, 10:59 AM | #18 | |
Senior Member
Join Date: October 14, 2009
Location: Sunshine and Keystone States
Posts: 4,461
|
Quote:
As you mentioned, maybe there was something going on with the gun's assembly. How many rounds were through it prior to the incident? |
|
January 31, 2012, 08:03 PM | #19 |
Junior Member
Join Date: January 27, 2012
Posts: 11
|
It surprised me too
Spacecoast-
I am positive of my load and there is no room for more powder anyway. I only use one weight bullet too so that's not it either. I had shot about 150 rounds with no problem. So I see what ur saying. I did and still will take the blame if I did something wrong. But Ruger took the blame. The interesting thing is that the repair is done with the gun completely assembled so it is a true external extractor system that sees the least amount of pressure than most of the other moving parts. Also Ruger told me how to do the repair and it only requires a large paper clip or small allen wrench to stick thru the side of the gun to hold a spring back while you snap in the extractor itself. If it goes on this easy?????? Skans- Your right, it was more of a POP I guess. I thank everyone for your responses. The new parts should be here by Thursday and I will update after the repair.
__________________
"From my cold dead hands" |
February 1, 2012, 08:30 AM | #20 |
Senior Member
Join Date: November 20, 2008
Posts: 11,132
|
vedecals, can you isolate specifically which part failed? I doubt that all 3 parts failed - just a chain reaction because one did.
|
February 1, 2012, 09:49 AM | #21 |
Senior Member
Join Date: September 15, 2010
Posts: 1,850
|
Vedecals you have maintained your composure and sense of humor in this thread in spite of some generally snarky posts-mine being the best (or worst) example. Well done. Good luck with your Ruger.
__________________
"Any fool can criticize, condemn and complain and most fools do." Benjamin Franklin |
Tags |
laser , laserlyte , ruger , sr9 |
|
|