|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 22, 2012, 02:06 PM | #1 |
Senior Member
Join Date: July 14, 2002
Location: Nashville, TN
Posts: 2,045
|
Benelli Nova 18inch Jamming Problem, Thoughts, Advice Needed
I have an earlier Benelli Nova, 18inch, ghost rings, standard tube no modifications etc.
It will frequently jam a shell either not fulling into battery or catching the hull or the very right side of the chamber bending the plastic slightly out of whack. It is not a feed problem from tube to carrier and it is not an eject problem it is a lift and chamber issue. I am 99% sure it is not a short stroking issue. It happens most with lighter, low brass, cheap stuff but will happen with higher end slugs and buck as well. Any ideas????? Thanks much, Chris
__________________
"Is there anyway I can write my local gun store off on my taxes as dependents?" |
|
|