|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 21, 2001, 12:28 PM | #1 |
Senior Member
Join Date: September 11, 2000
Posts: 436
|
Most of the guns are the 1911, or so I have
heard. At least that is what all the top shooters appear to be shooting. The HK P7 would work great in competition IMO. |
January 22, 2001, 10:54 AM | #2 |
Senior Member
Join Date: December 8, 1999
Location: Lexington, KY,USA
Posts: 738
|
I shoot IDPA and USPSA three gun. I know a couple of guys that have this gun. But they do not shoot in competition. Kimber, Springfield Armory, other 1911s and Glocks. Lots of GLOCKS. That's my observation.
|
January 22, 2001, 11:53 AM | #3 |
Senior Member
Join Date: October 29, 1998
Location: Colorado
Posts: 534
|
It's a great gun, but the 9mm is minor for IPSC, so you won't see many. Should be good for IDPA, unless there is some silly rule banning it.
__________________
TaxPhd "Those who live by the sword are probably pretty f***ing good at it." "Instructions for a successful gunfight: Front Sight, Press Trigger, repeat as necessary." - B. Braxton |
January 22, 2001, 01:20 PM | #4 |
Senior Member
Join Date: February 7, 1999
Location: USA
Posts: 644
|
Here in SC, a fellow with a P7M13 twice won the state's USPSA Limited Division title. This was around the early/mid-'90s. As Col. Cooper once stated, you can score well in IPSC with a 'Minor' caliber pistol...as long as you always hit the A-zone.
|
January 23, 2001, 02:56 PM | #5 |
Senior Member
Join Date: June 29, 1999
Posts: 126
|
I shot my P7M8 in IDPA for a while, but moved to CDP with a 220 a few months ago. I honestly did that for the challenge, since the P7 was so easy to shoot I was getting times as good or better than some of the good guys in CDP (the most competitive division around here). It's still my primary carry gun, since it's so easy to be fast and accurate, but I started to feel like I was sandbagging a bit (probably would have felt that way with any 9mm though).
|
January 23, 2001, 11:54 PM | #6 |
Senior Member
Join Date: January 16, 2001
Posts: 115
|
I've switched to using my P7M8 for IDPA instead of my USP45. IDPA is set up so you compete with similiar guns.
1911's in 45 or 10mm are in Custom Defensive Pistol. 8 rounds only in the mags. USP45 can be shot in CDP. Stock Service Pistol, basically any stock pistol, but first shot must be fired DA. 10 round max in the mags. P7 and USP can be shot in SSP. Enhanced Service Pistol, 9mm or .40. DA/SA guns can be shot SA for first shot if it can be carried cocked and locked. Limited modifications allowed. 10 rounds also. Most SSP guns can be shot in ESP depending on caliber. Then there's the revolvers. The P7M8 has many advantages and disadvantages. Advantages: Accuracy Quick follow up shot due to the light slide and fast action. Ambi controls SA trigger, no 10 lbs DA. Slide release is in the squeeze cocker Single stack mags easier to grip for tactical reloads Disadvantes: 8 round mag capacity. P7M13 would be a better choice. Or until CJS starts making the extended +2 baseplates for the M8. Basically two reloads to get through a 18 round stage vs. 1 for the guys with 10 rounds. Hard to recover ejected casings for those that reload. 9mm is ideal for SSP and ESP because it meets the minimum power factor. For IPSC, it is dominated by the 1911's though. |
January 24, 2001, 07:55 PM | #7 |
Senior Member
Join Date: September 11, 2000
Posts: 436
|
Hi scooter2, I have the USP .45 fullsize and
a new P7M8. To me they are 2 completely different guns and the only thing they really have in common is that they both have sights!!!lol I am quite accurate with my USP (esp. with my Mark 23) I would like my P7 shooting to be on par with my Mk23 and USP ability. Any tips or suggestions from a Pro shooter would really be nice... Thanks for your time... Todd
__________________
ACCOUNT FOR EVERY SHOT AND MAKE EVERY SHOT COUNT |
January 24, 2001, 08:30 PM | #8 |
Staff Alumnus
Join Date: October 7, 1998
Location: N 47 11.614' W 122 13.345'
Posts: 57
|
There was an instructor for F.A.S. (Firearms Academy of Seattlel) who was using a P7 for IDPA and Tactical matches.
Tom.... er... something or other. I remember him commenting on how hot it (the pistol) got during the classifier. |
January 24, 2001, 08:45 PM | #9 |
Senior Member
Join Date: January 16, 2001
Posts: 115
|
Dakodakid, one of the things I did for my USP and P7M8 is to get the same sights. I'm using the stock white dot sights on both guns, but have replaced the rear sight with MMC sights. The USP has dots on it, but I use sight black on them. The P7 just has black sights. By using the same sights, you don't have to adjust to a different sight setup.
The tip I sent you from Bruce Gray is a good starting point on learning this gun. I post under Scooter on HKPRO and Park Cities Tactical forums, someone beat me to that name. Learn to pull the trigger like a double action. Be smooth and pull all the way back in one motion. There's too much movement to treat it like a SA trigger. Learning where the reset point of the trigger is helpful to get that fast second shot. The area that the P7 really shines is in the follow up shots. It cycles really fast and has little muzzle flip. The USP45 behaves much differently. |
January 24, 2001, 11:11 PM | #10 |
Senior Member
Join Date: September 11, 2000
Posts: 436
|
thanks again scooter2,
I am extremely accurate with my P7 if I slow down a bit on the trigger... In time I will gain the trigger control on the P7 to pull it fast and still be accurate.... The info you e-mailed me did help but I am always hungry for more knowledge... Its this little thing that I have about needing to learn something new everyday..... take care
__________________
ACCOUNT FOR EVERY SHOT AND MAKE EVERY SHOT COUNT |
Thread Tools | Search this Thread |
|
|