January 3, 2012, 12:17 PM | #1 |
Senior Member
Join Date: December 25, 2010
Posts: 587
|
Dummy rounds
One of my main home defense guns is my SR40, I also carry it from time to time. The only problem I have when training with this gun is it won't malfunction, so I have know practice clearing them should one ever happen. I was think about loading up some rounds with no powder and just keeping the old primer in or not putting a primer in at all. These would he randomly thrown in with my practice ammo so I never know when one will pop up. Has anyone ever tried this before?
Ofcourse this would pretty much only cover missfires, so any other suggestions for simulating malfunctions would be great. These rounds would be treated as live ammo and mixed in with practice rounds for safety reasons. I carry factory ammo so they would never be mixed in with those. Any thoughts?
__________________
Someday I'll be good enough to know if a gun is accurate or not. |
January 3, 2012, 12:33 PM | #2 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
I use dummy rounds all the time in my High Power and GSM Clinics. Normally we have classroom training prior to shooting.
In demonstrating and practice loading dummy rounds come in handy. Simply don't let live rounds in the class room. I make up dummy rounds by removing the decapper from the sizing die, leaving the spent primer in and stuff in a bullet without powder. To mark them so one can instantly see they are dummy I drill holes in the brass. I tried painting them but often the paint jams up things. They make dummy rounds for dry firing. If its for one guy and one gun they are great. If you have a class of 4-8 students practicing loading 'n such they are expensive.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
January 3, 2012, 12:58 PM | #3 | |
Staff
Join Date: September 27, 2008
Location: Foothills of the Appalachians
Posts: 13,059
|
Quote:
Snap caps are my recommendation for malfunction simulation. Kraig's suggestion is a good one, but I've seen dummy rounds and live ones get mixed up. It's a bit harder to confuse snap caps with live ammo.
__________________
Sometimes it’s nice not to destroy the world for a change. --Randall Munroe |
|
January 3, 2012, 01:03 PM | #4 |
Senior Member
Join Date: November 15, 2007
Location: Outside KC, MO
Posts: 10,128
|
I second the snap caps over the dummy rounds. I've read one report too many of people mixing up the ammo, and shooting training partners in FOF classes.
It shouldn't happen, but it does. One report I read involved a USMC Force Recon SSGT, who shot a fellow trainee, and was subsequenty court-martialed and convicted of either manslaughter or negligent homicide - for allowing training ammo and live ammo in the same space. |
January 3, 2012, 01:09 PM | #5 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
That's the instructors fault. I inspect everything in my classes. And if a gun isn't actually being used, meaning pointed down range, ready to shoot or dryfed it has a ECI (Empty Chamber Indicator) or you leave.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
January 3, 2012, 02:08 PM | #6 |
Senior Member
Join Date: December 25, 2010
Posts: 587
|
I'm not sure if I was clear or not. These would be mixed in with range ammo, and treated as live ammo. I want them to look like my normal range ammo so I will not be expecting the malfunction.
If I were to teach someone I would use snap caps or drill holes in the brass.
__________________
Someday I'll be good enough to know if a gun is accurate or not. |
January 3, 2012, 02:17 PM | #7 |
Senior Member
Join Date: July 5, 2007
Posts: 463
|
But you will still recognize them by weight. It's better to just get someone else to load your mags -- ask them to randomize the dummies. Plus, with a brain doing it, you can end up with cool special cases (two ftfs in a row?!?).
Sent from my Ally using Tapatalk |
January 3, 2012, 02:21 PM | #8 |
Junior member
Join Date: April 21, 2011
Location: Illinois
Posts: 4,555
|
When I go the range I see where people have shot the wall, the ceiling, the booth partitions.
I thought those were dummy rounds. |
January 3, 2012, 02:39 PM | #9 |
Senior Member
Join Date: October 31, 2009
Location: Ohio
Posts: 1,310
|
So if i inderstand the issues here they are
Resembling live ammo visually allows you to fool yourself when loading but unintentional mix ups later on can be dangerous. Marking home made dummy rounds externally takes away the "surprise" because you notice when you load them. Snap Caps that do not resemble live rounds by sight or touch help remove some mistakes but would not surprise you when training. So my vote is for making dummy rounds that feel like your ammo but are marked as much as possible. As you load you could hold a few in your hand then look downrange. You'd know the dummy round was in there but not exactly where in that set of 3 or 4. You could periodically recolor the dummy rounds using bright colors - nail polish on the bullet? I don't know if an aggressive crimp would prolong color longevity by making it smaller but you get the idea. |
January 3, 2012, 03:01 PM | #10 |
Senior Member
Join Date: November 17, 2000
Posts: 20,064
|
I've done classes, matches and tests with snap caps to test your malfunction procedures. I don't like the idea of using anything that looks like a real round. So, put rounds in a bag, shake them and load without looking. It isn't that hard.
Get a standard pack and you can do this with a few mags. Or if you shoot with a buddy, have them load and hand it to you. We do that quite a bit.
__________________
NRA, TSRA, IDPA, NTI, Polite Soc. - Aux Armes, Citoyens |
January 3, 2012, 05:32 PM | #11 | |
Senior Member
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 3,006
|
Quote:
__________________
"9mm has a very long history of being a pointy little bullet moving quickly" --Sevens |
|
January 4, 2012, 08:50 AM | #12 |
Member
Join Date: February 15, 2011
Location: The Great Midwest
Posts: 16
|
I make up dummy rounds as well, but I de-cap as well as no powder. That way one can not wonder later on if there is powder in the round that did not go off for some reason.
|
January 4, 2012, 09:53 AM | #13 |
Senior Member
Join Date: May 1, 2001
Posts: 10,223
|
The biggest issue I always had with the dummy rounds is, its very hard to tell them apart from live rounds, especially when they are in the gun. The chances of a mix up are just way to high and easy.
Another issue with the dummies is, they dont hold up very well or long, and soon are trouble themselves. Constant chambering, ejecting, and falling to the ground and bouncing off things, just beat them up. Most notably, the bullet set back (and no matter how hard you crimp them) and the rim of the case being chewed up by the extractor. With the better snap caps, the rims seem to hold up a lot better to abuse, and just due to how they are made, you dont have the setback issue. |
January 4, 2012, 11:36 AM | #14 |
Senior Member
Join Date: December 25, 2010
Posts: 587
|
I don't really see the danger when they are treated as live ammo and are not kept with your SD ammo. Even with snap caps or an empty chamber I still follow the rules out of habit.
__________________
Someday I'll be good enough to know if a gun is accurate or not. |
January 4, 2012, 11:55 AM | #15 |
Senior Member
Join Date: November 15, 2007
Location: Outside KC, MO
Posts: 10,128
|
MrDontPlay, the whole point is he wants to mix them with his live ammo, for malfunction training.
As long as he only ever uses it at the range, no problem. However, if he ever uses them for dry-fire away from the range, there could be a huge problem. Similarly, should he use the gun for carry, and accidentally mix in one of his (purportedly) identical dummy rounds, he could have a self-induced malfunction at a very bad time. I don't see the advantage to these. Let somebody else load the magazines, and use snap caps, when he wants to do malfunction drills. |
January 4, 2012, 12:54 PM | #16 |
Senior Member
Join Date: November 21, 2011
Location: Southern Louisiana
Posts: 1,399
|
Every training agency I've worked with over the last 10 years or so uses the Saf-T-Trainer plastic dummies.
http://www.brownells.com/.aspx/pid=9...SAF-T-TRAINERS Having any kind of dummy round that can easily be confused with a loaded round is not a real smart idea. There might be "almost no possibility" of it getting mixed up at a bad time, but there is also "almost no possibility" of you needing your weapon or having an accidental discharge. There's a reason the word "ironic" is in the english language .... |
January 7, 2012, 03:02 PM | #17 |
Senior Member
Join Date: February 5, 2007
Location: Monroeville, Alabama
Posts: 1,683
|
I thought this was a post about me. Sorry, carry on.
|
January 16, 2012, 02:25 PM | #18 |
Member
Join Date: May 28, 2011
Posts: 47
|
Whenever I go to the range, and sometimes even for IDPA matches, I'll load one or two snap caps into a few of my mags, in a random position. All my mags are identical, and loading from my belt I never get the chance to cheat and see the dummies, so it makes for a good drill for that type of failure. Tap rack bang.
__________________
http://www.conlaw-bloganon.blogspot.com |
January 16, 2012, 04:25 PM | #19 |
Senior Member
Join Date: March 28, 2011
Posts: 600
|
Hope this doesn't strike others as unsafe practice but it works for me :
I just use fired brass. Have someone else load your mags. |
January 16, 2012, 04:29 PM | #20 |
Senior Member
Join Date: March 28, 2011
Posts: 600
|
Or purposely use the most unreliable ammo you can find?
|
January 17, 2012, 08:43 AM | #21 |
Senior Member
Join Date: September 13, 2007
Location: Sunny Florida
Posts: 844
|
You could fill the case with silicone. It will add weight and keep the bullet from crushing into the case.
|
January 18, 2012, 01:54 PM | #22 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
jephthai, you can recognize a difference of 4 grains(that's how much the powder charge in my target 9mm loads weigh)? I don't think that's likely but I might be just insensitive.
|
|
|