January 1, 2007, 08:28 PM | #1 |
Senior Member
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
|
9.3x64 Oal
Friends:
I've just completed my 9.3X64 bbl'd. action, welded handle on, opened bolt-face etc. and works like a charm (yes, in a 1/2 Mauser test stock it does kick) but it ia a soft big push, not a sharp Tyson jab. I'm looking for ctg, oal and cannot fint a dm. I'm thinking of establishing it to roughly 3.335" - just short of 3.4". The PTG reamer allowed lots of bullet space even for the 286 or 300 gr bullets! Can some of you critique this idea. Harry B. |
January 4, 2007, 06:11 PM | #2 |
Senior Member
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
|
ctg. aol.
Dear Sirs;
On Chuck Hawks site he had the ctg. OAL; for the German 9.3X64. If anyone would need it it's 3.37 if I remember - of course that's only.003 short of the 98 guard opening (on some mausers). I'll need to open it up slightly. Harry B. Last edited by Harry Bonar; January 4, 2007 at 07:01 PM. |
|
|