August 30, 2006, 11:54 PM | #1 |
Member
Join Date: August 1, 2005
Posts: 71
|
browning light 20
i have the opportunity to buy a browning light 20 made in japan in 99%. while looking at the barrel there is a slight bulge/ring half way down. i rubbed my finger across the barrel and could not feel a bulge. the seller wants 350.00. is this a great deal even if i have to find a new barrel. thanks in advance.
|
August 31, 2006, 07:29 AM | #2 |
Senior Member
Join Date: May 19, 2005
Location: Valdosta, GA
Posts: 953
|
Nope. Don't get it. Buying a new barrel will set you back more than you could get a good used one for. I wouldn't take my chances on a bulged barrel either. Sounds like someone shot it with a wad of mud in the bore.
|
August 31, 2006, 09:13 AM | #3 |
Senior Member
Join Date: July 13, 2006
Location: Maryland
Posts: 250
|
I assume your talking about an A5?
If so, you'll probably spend another $350 on a barrel. 20's can cost a lot more than that but don't always. It may be an ok deal but is not necessarily a great one... Jeff |
Thread Tools | Search this Thread |
|
|