|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 31, 2011, 01:45 PM | #1 |
Member
Join Date: May 31, 2011
Location: EASTPOINTE, MICHIGAN
Posts: 27
|
Stock removal rem. 1100 20ga
Remington must have reengineered the stock bolt on their semi auto 1100 made in jan 2011, their schematic does not show what i see when i look into the stock assembly it looks like all i need is a socket wrench with an extension to remove what looks like a six sided hollow bolt "thing" there is not slotted bolt in there like their schematic shows please, someone, advise me on what i need to get this damn stock off!
GOOD NEWS GENTLEMEN -- A GUNSMITH WHO KNOWS WHAT HES DOING== TOLD ME THAT REMINGTON HAS INDEED REVAMPED THE STOCK ASSEMBLY THEY NOW NO LONGER USE INFAMOUS SLOTTED SCREW TO AFIX THE STOCK TO THE RECEIVER INSTEAD THEY NOW USE A HEXAGONAL "HOLLOW" NUT MY THANKS TO ALL WHO RESPONDED TO MY QUERY NO THANKS GOES TO REMINGTON FOR NOT UPDATING THEIR DAMN SCHEMATIC--THEY JUST LOST A FEW SALES BECAUSE OF THEIR DISREGARD OF THE GUN-BUYING PUBLIC THE REASON I WANTED TO CHANGE THE STOCK IS BECAUSE THE ORIGINAL STOCK DID NOT FIT THE RECEIVER--THERE IS NO QUALITY CONTROL AT REMINGTON!!!!! Thankyou Last edited by privateer1939; June 3, 2011 at 05:37 PM. Reason: CALLED REMINGTON AND GOT THE STRAIGHT INFO ON STOCK ASSEMBLY FROM GUNSMITH |
May 31, 2011, 07:42 PM | #2 |
Staff In Memoriam
Join Date: October 31, 2007
Location: Western Florida panhandle
Posts: 11,069
|
No one?
You might find the correct owner's manual online... I am of little help... I have only tinkered with an 870 a few times... Brent |
May 31, 2011, 08:19 PM | #3 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
My 1100 I had in 28 had the socket head with a slot. My older gunsmith gent (75 years experience) had made himself a specific tool to avoid splitting the stock - you'll find many old guys had done the same. If they have omitted that slotted design, and your socket has thin enough walls to fit, then give it a try.
If your gun is only a few months old, there should be no reason to remove the stock, the spring can be a bit of a bugger at times |
May 31, 2011, 08:24 PM | #4 |
Senior Member
Join Date: December 18, 2010
Location: South Central Pa
Posts: 692
|
Thin walled socket with a extension is what I use every time on mine
|
|
|