October 18, 2012, 08:55 PM | #1 |
Senior Member
Join Date: November 14, 2010
Posts: 260
|
Used Winchester 1300
Found one of these days, wood stock, wood pump, probably 20 years old at least, sseemed in reasonable shape, asking 250, could probably get a little lower. Is this a deal?
|
October 18, 2012, 09:54 PM | #2 |
Senior Member
Join Date: December 18, 2005
Posts: 241
|
Seems to be reasonable. What is the barrel length? Does it have the Winchoke screw in barrel? Does it pump smooth or stick? Gunbroker has Win 1300 22" and 18" barrels for sale for about $200.
__________________
"America is a free country, and Michael Moore is free to make an @zzhole of himself". David Horowitz in "Michael Moore Hates America". |
October 19, 2012, 09:56 AM | #3 |
Senior Member
Join Date: September 25, 2009
Location: North Central Ohio
Posts: 171
|
A little high on price , unless near new condition or have extras . The 1300pump is a great shot gun . Winchester 1300 is my #1 pick in pumps. Around here 175-200 dollars avereage , some up to 250 in nice shape .
|
October 19, 2012, 11:09 AM | #4 |
Senior Member
Join Date: November 14, 2010
Posts: 260
|
Thanks, guys, for the info!
|
October 19, 2012, 05:52 PM | #5 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
|
Agree, that's a bit high, even if it has the Winchoke system and all the tubes.
But... The 1200 and the 1300 are two of the toughest shotguns you'll ever encounter.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
October 21, 2012, 01:25 PM | #6 |
Member
Join Date: September 9, 2004
Location: Houston, TX
Posts: 33
|
in good condition i would buy it. about 10 years ago i paid $200 for a like new condition 1300 Defender at a pawn shop. wood stock and pump.
i own two Winchester 1300's, i like the ergonomics of the safety and slide release much better than Remingtons, and Mossberg pumps feel too loose for my tastes. |
October 21, 2012, 03:46 PM | #7 |
Senior Member
Join Date: February 28, 2008
Location: Michigan
Posts: 2,619
|
What about the plastic parts that will break?
You guys know, the ones that can be had now! |
October 21, 2012, 04:15 PM | #8 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
The 1200s and 1300s are different animals. The 1200s are far from tough. Most 1300s seem to be okay. The 1400 semi autos are not a good investment either in my opinion.
|
October 21, 2012, 09:31 PM | #9 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
|
I've got nearly 20,000 rounds through my 1200, and who knows how many rounds the previous owner put through it.
Never had a single issue with parts breakage, a misfeed, or anything like that. I'll stick by my assessment, the 1200s are tough shotguns.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
October 21, 2012, 11:57 PM | #10 |
Junior Member
Join Date: September 28, 2011
Posts: 4
|
That's a little high but if it's perfect condition grab it because the value is only gonna go up them things are in hi demand
|
October 22, 2012, 05:59 AM | #11 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
Many years ago Winchester opened a skeet and trap range. They sold shotguns and you could rent a 1200 or a 1400. A friend worked there. They literally stacked the 1200s and 1400s in a barrel until they got a bunch and then shipped them all back to Winchester to be repaired.
I am glad yours is doing well and I wish you continued good shooting. |
October 23, 2012, 12:39 PM | #12 | |
Senior Member
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
|
Quote:
In his book, The American Shotgun, author David F. Butler reported that the Model 1200 endured extensive 1,000, 5,000 and 10,000 round endurance test cycles during its development, "...the whole cycle (being) repeated again and again until the mechanism had been so refined that it could stand long endurance tests without breakage..." Mr. Butler concluded "...This meant that many components within the Model 1200 were stronger than they had to be for a slide-action shotgun, but the design team felt that these decisions would result in a smooth-working, long-lived shotgun..."
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED ...Aristotle NRA Benefactor Life Member |
|
October 23, 2012, 03:24 PM | #13 |
Senior Member
Join Date: April 14, 2008
Location: Family ranch - Central TX.
Posts: 467
|
The Model 1200 and the Model 1300 are pretty much the same shotgun. I've had several of both over the years and all have been durable and good shooters.
|
October 24, 2012, 03:11 PM | #14 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
|
"They literally stacked the 1200s and 1400s in a barrel until they got a bunch and then shipped them all back to Winchester to be repaired."
Are you sure they were 1200s, and not the virtually identical, but cheaper and apparently less durable, 120? There was a similar Model 140, which was a cheaped down version of the 1400.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
October 24, 2012, 03:18 PM | #15 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
If it doesn't have screw in changeable chokes...I think you should pass on it.
Not all model 1300's had the winchoke system in them / I don't think Winchester started installing them until the mid 80's ...but not positive. Barrel length / and if its a fixed choke ...what the choke is - all affect value in a big way. If it has the winchoke changeable choke system in it ...and how many choke tubes come with the gun - will also affect the value. If its a fixed choke gun ...value in my opinion is maybe $100. |
October 24, 2012, 03:28 PM | #16 |
Senior Member
Join Date: November 17, 2008
Location: Pittsburgh
Posts: 222
|
My dad has a 1200 bought in 1975 that has the Winchoke.
|
October 24, 2012, 04:29 PM | #17 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
Ok, forget what I said....sorry ..../ I thought all the 1200 were fixed choke guns....
|
October 24, 2012, 07:47 PM | #18 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
Okay, forget it. I must have imagined the whole thing.
I don't know what the specific differences are between the 1200 and the 1300, because I have never been a huge fan of either, although I sold a good number of 1300s and have also shot a few and never had any issues. If they are the same, why did Winchester "revamp" the 1200 and change nothing? Remington bought the rights to the Ithaca Mag 10, and they were almost 3 years working out a "few kinks" in that design before they re-released it. I don't know exactly what they did. I did own a Mag 10 and replaced more than one broken part on mine, and on a bunch of other peoples'. I have yet to see a Remington Mag 10 with a broken part, and they look about the same too. They were not 120s. I did not imagine that. the Winchester design team no doubt had good intentions with the 1400 too, and it was a total flop. They never made a decent semi from the time they passed on John Browning's Auto 5 design until the Super X. The post -64 Model 70 was a great improvement too, no? |
October 24, 2012, 08:55 PM | #19 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,380
|
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
October 25, 2012, 05:23 AM | #20 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
BTW, that range was outside Williamsburg, VA. The range is long gone, but off Penniman Rd., just East of I-64 across from Water Country, there is still a small lane to no where. Winchester Rd.
|
Thread Tools | Search this Thread |
|
|