September 22, 2014, 09:08 AM | #1 |
Junior Member
Join Date: September 22, 2014
Posts: 1
|
Safety Switch issue
Hi Guys, I am a newbie to the AR-15 Platform, I just purchased a M&P 15 Sport and was doing some minor upgrades (Such as replacing the grip handle) I was watching video and followed all instructions but for some reason when I put the selector spring back into position, it does not go back into full safe mode? I have taken it off 5 times and tried to redo it all with no success? Can anyone possibly help me with this issue? Thank you in advance!
Mike |
September 22, 2014, 12:20 PM | #2 |
Senior Member
Join Date: October 15, 1998
Location: Sherman, TX USA
Posts: 3,750
|
Welcome.
No offense but is the hammer cocked? The safety lever on an AR15 will not rotate to "Safe" if the hammer is down (in the fired position).
__________________
Make mine lean, mean, and 9x19! Last edited by 9x19; September 22, 2014 at 06:49 PM. |
September 23, 2014, 12:30 AM | #3 |
Senior Member
Join Date: March 13, 2014
Location: Tonica, IL
Posts: 473
|
That would be my guess too. I had a moment of confusion after I field stripped and cleaned it until I realized that. My Savage Mark II is the same way.
|
|
|