The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old March 20, 2013, 09:44 PM   #1
Guinness2
Member
 
Join Date: March 8, 2013
Posts: 16
Colt 1917 revolver question

Do all U.S. Property "G.I.Issue" Colt 1917 revolvers have the "rampant colt" etched into the sideplate? I am looking to buy one and it has all the correct markings but no Horsey. Anybody know what that means? Serial # is 104XX if that matters.
Guinness2 is offline  
Old March 21, 2013, 03:19 AM   #2
Hawkeye146
Member
 
Join Date: March 8, 2013
Location: Tennessee
Posts: 28
Does it say "colt" anywhere on it. It may be a Smith and Wesson, because they also made model 1917s. Also sometimes those ponies get rubbed off depending on condition.
__________________
Smooth is fast, PRESS the trigger
Hawkeye146 is offline  
Old March 21, 2013, 10:02 AM   #3
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
It could mean that it was lost during an arsenal refinish.

Many of the 1917s, both Smiths and Colts, were refinished, and the military didn't really care about preserving logos and the like.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old March 21, 2013, 10:38 AM   #4
Bob Wright
Senior Member
 
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 2,986
I understand that many WW I vintage M1917s were refinished during WW II and were Parkerized. This would almost certainly remove the logo.

Bob Wright
Bob Wright is online now  
Old March 21, 2013, 12:07 PM   #5
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
Exactly what I was thinking, Bob.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old March 22, 2013, 11:46 PM   #6
Guinness2
Member
 
Join Date: March 8, 2013
Posts: 16
It says COLT DA 45 on the barrel. It is not parkerized. Looks like original finish. Going through all the 1917s on gunbroker it seems that 1 out of 10 do not have the logo. Maybe it has been re-finished off in the past. In your opinion, should I pass on it as a collectible piece?
Guinness2 is offline  
Old March 24, 2013, 02:54 PM   #7
chiefr
Senior Member
 
Join Date: January 27, 2010
Location: AR
Posts: 1,401
I agree on parkerization, I once owned an arsenal refinish and the parkerization removed the horses and the rest of the markings were faint.
It was a nice shooter and one I wish I still owned.
chiefr is offline  
Old March 24, 2013, 03:23 PM   #8
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
I believe all Model 1917's have the Colt on the sideplate, but I am willing to be corrected. In many cases the stamping is very light and doesn't show well when the finish is that "brush blue" common on those guns. If the gun is refinished, either Parkerized or blued, the "pony" can be easily lost.

Jim
James K is offline  
Old March 24, 2013, 03:33 PM   #9
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
Yesterday I bought a circa 1934 Police Positive in .32 Police (.32 S&W Long).

The finish is original, but the Colt logo is, as James mentioned, pretty faintly stamped.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old March 24, 2013, 03:39 PM   #10
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
The reason is that even if supported, those sideplates are easily bent and a bent sideplate makes the gun inoperable. I don't know whose idea it was to put the "pony" on there, but it was not really a good one.

Jim
James K is offline  
Old March 24, 2013, 03:43 PM   #11
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
Makes you wonder, then, how Smith & Wesson put the logos on their sideplates.

My 1917 Brazilian issue has the Brazilian crest stamped so deeply on the sideplate that it looks almost as if it is bas relief.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old March 24, 2013, 04:12 PM   #12
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
Good point, Mike, and I don't know how S&W did that. But I do know those Colt sideplates are pretty easy to bend, and I think it is reasonable to believe they would not have stamped them very hard.

Jim
James K is offline  
Old March 24, 2013, 05:25 PM   #13
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
Stamp the blank then mill to final thickness?
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old March 24, 2013, 05:48 PM   #14
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
Probably not. Stampings were almost always done after completion of the part, sometimes even after final assembly and finishing of the gun (the Ordnance "belt" on M1911A1 pistols was stamped through the Parkerizing).

I doubt we will ever know that kind of detail, but that "pony" was lightly stamped, even on civilian guns. Maybe Guinness will provide pictures so we can see the overall condition of the gun and try to provide a better answer.

Jim
James K is offline  
Old March 24, 2013, 10:42 PM   #15
Guinness2
Member
 
Join Date: March 8, 2013
Posts: 16
It's on gunbroker here:
But the photo is poor.

http://www.gunbroker.com/Auction/Vie...Item=333310885
Guinness2 is offline  
Old March 25, 2013, 07:15 AM   #16
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
That's what I thought, too. But somehow they managed to whack the hell out of my 1917 without messing up the sideplate.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Reply

Tags
1917 , colt , rampant colt , revolver

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.08686 seconds with 10 queries