|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 13, 2013, 12:26 PM | #51 | |
Senior Member
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 2,603
|
Quote:
Also, you barrel's muzzle will wear less without a wood ramrod wiping against it with who knows what abrasive stuff imbedded in it. |
|
January 29, 2013, 01:12 PM | #52 |
Senior Member
Join Date: August 30, 2010
Posts: 1,635
|
Yup, I've seen it happen at N-SSA shoots.
Usually there is no harm to the gun, but usually the ramrod is ruined. Steve |
January 29, 2013, 01:53 PM | #53 |
Member
Join Date: January 17, 2013
Posts: 41
|
In the 80's I was in one of those CW re-inactor clubs. While they don't do it today, back then we had live round shoots at targets, usually 9" pieces of tile hung from a 2x4 at 25 yds or 50 yds and it was fun shooting. We shot in groups of four and were timed, so we shot fast. We used plastic cups to hold the ball and powder charge. We also stuck our bayonet in the ground next to us and used the socket to hold the ram rod....probably not authentic, but that's what we did.
Someone was always forgetting to removed their ramrod and shot it down range, or they tried to. It doesn't go far and it bends about at it's middle about 90 degrees. So you end up with a crooked ramrod, which cannot be straighted. I'd say it happened once or twice during every shoot. Long story short, if Clark Gable shot one from a musket at an Indian it would not stick into him like an arrow. It'd go sideways and bounce off. I never did it, because I was shooting an original gun and kept thinking about not wanting to ruin that old ramrod. When it happens though it kicks like mad. We were loading 60 grains of FFG, and a greased minie ball which was the old loading. |
Thread Tools | Search this Thread |
|
|