|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 1, 2010, 07:47 PM | #1 |
Senior Member
Join Date: April 26, 2005
Location: Orygun
Posts: 2,589
|
What's wrong with Savage Rimfires?
I thought it was just the Mako I bought with the funky stock. It didn't initially shoot too well. I checked the stock fit and the barrel was pressed up against the fore end pretty good, so I pillar bedded it and did what I could to get a good bedding on that weird, round recoil lug... So, I was looking at model 93s (on sale this week) and the BTVS model had an uneven contact between barrel and stock near the front of the stock... So, is it something inherent in the design (I had assumed that factory stocks would have a v-block of some sort for the round lug)? Or maybe it's the Canadians putting these things together? Anybody else have a heavy barrel Savage rimfire with not-quite-free-floated barrels? -tINY |
January 1, 2010, 11:27 PM | #2 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
Both Savage rimfires I've owned weren't quite free floated.
Jimro
__________________
Machine guns are awesome until you have to carry one. |
January 2, 2010, 09:02 AM | #3 |
Senior Member
Join Date: December 18, 2005
Location: Ohio
Posts: 610
|
tiny- Yep. I recently picked up a Mark II, and the last inch of the forend was touching the right side of the barrel. After finding this, I went back and looked at four others (same rifle), and all of them had the same area touching the barrel. So I decided to bed it, BUT, I hadn't even fired it yet. I fired two boxes (of 50) of Wolf match rifle, and it shoots bugholes with that ammo, sans bedding. But the stock touching the barrel still annoys me even though it is shooting well for now. I figure I'll fix it if/when it becomes a problem, I guess.
|
January 2, 2010, 09:34 AM | #4 |
Senior Member
Join Date: November 20, 2007
Location: South Western OK
Posts: 3,112
|
The barrel of my Savage model 93L is fully floated. Maybe Savage does a better job on left hand guns.
|
January 2, 2010, 01:24 PM | #5 |
Senior Member
Join Date: April 26, 2005
Location: Orygun
Posts: 2,589
|
The 93G seemed to be alright, as did the 93F... Was that South Paw a B, G, or F? -tINY |
January 2, 2010, 04:43 PM | #6 |
Senior Member
Join Date: October 15, 1998
Location: Sherman, TX USA
Posts: 3,750
|
Both of mine are the less-expensive synthetic stocked models, but they have been good shooters. The fore-ends have some flex, but if that really bothers you, a bit of epoxy and a short length of aluminum angle can fix it quick.
I've no complaints with accuracy. Savage Mark II FV (.17 HM2) with a Nikon 2x-7x 32mm scope Savage 93R17 FV (.17 HMR) with a Nikon 2x-7x 32mm scope
__________________
Make mine lean, mean, and 9x19! |
January 2, 2010, 04:55 PM | #7 |
Senior Member
Join Date: April 26, 2005
Location: Orygun
Posts: 2,589
|
Maybe that's the trick: Most of the time, it doesn't affect accuracy, so Savage doesn't worry about it. -tINY |
January 2, 2010, 05:39 PM | #8 |
Senior Member
Join Date: July 6, 2006
Location: Planet Earth
Posts: 976
|
My 9317 bvss will shoot one tiny hole at 100 yds. I dont care about the bedding, I'm not going to change a thing.
__________________
If ye love wealth better than Liberty, the tranquillity of servitude than the animated contest of Freedom, go from us in Peace. We ask not your counsel or Arms. Crouch down and lick the hands which feed you. May your chains sit lightly upon you, and may posterity forget that you were our countrymen. --Samuel Adams--<*ixoye>< |
January 2, 2010, 07:58 PM | #9 |
Senior Member
Join Date: January 9, 2007
Posts: 1,007
|
I've got a BTVS that's free floated with lots of room to spare and it shoots good. I bought my kid the 93 FVSS with the composite stock. Let me just say it ain't no HS Precision. You can hold it one way and it passes the dollar bill test. Rest it on sandbags and the barrel will touch the stock. It really is a disappointment to shoot. It will put 2 in the same hole and then throw a 2 1/2 inch flyer. We just got a laminated stock for it and it is much sturdier and is free floated. We haven't had a chance to shoot it yet. It makes you wonder why Savage would put out such a flimsy piece of crap. How much more would it have cost them to make the stock a little stiffer? 50 cents worth of plastic?
|
January 5, 2010, 05:55 PM | #10 |
Junior member
Join Date: October 13, 2008
Posts: 104
|
I have a Savage Mark II and all I did to get the barrel off the
forearm was to put washers between the front part of the action and the stock. That jacked the barrel up about an eighth of an inch. Why dont you give it a try |
January 5, 2010, 06:09 PM | #11 |
Senior Member
Join Date: July 7, 2008
Location: Bristol, TN
Posts: 102
|
My 93FSS is a good shooter (.22 WMR). I haven't messed with it at all with the exception of adding a 3X9 scope (Bushnell I think)
I've never checked to float but I suppose now I'll have to. |
Tags |
free float , quality , rimfire , savage |
|
|