Stevens 311h 20ga.

Crash.45 · November 7, 2010, 09:40 AM

hello all, i am in need of a barrel assembely for my stevens/savage/springfield

etc. model 311h in 20 gauge, the origional barrels were damaged beyond

repair, anyone selling some or know where i can get them/ what would be a

compatible set to affix to the receiver, for lack of a better description, the

barrels basically blew out on the sides, and i have had the gun for a long time

and it is a very good hunter, id hate to have it lay around and collect dust

now, any information would be greatly appreciated, thanks

Hawg · November 7, 2010, 10:11 AM

Numrich might have a set. www.e-gunparts.com might find a set on gunbroker.

Crash.45 · November 7, 2010, 02:09 PM

hey hawg, thanks for the information, yea ive been to those sightsalready

and no go, i havent been having much luck with my recent searches and am

somewhat at a loss so far, anybody have any other ideas??

Crash.45 · November 8, 2010, 09:22 PM

bump

zippy13 · November 8, 2010, 09:43 PM

Cash,45
Unfortunately, you may have to buy a complete donor gun for the barrel assembly. Keep your eyes open for someone with a 311 with a broken stock or other problem that would drive the price way down.

Crash.45 · November 9, 2010, 05:05 PM

thanks zippy13, i was hoping it would be easier than that but i will definatly

keep my eyes open for a cheap donor shotgunas well

Crash.45 · November 14, 2010, 07:28 PM

does anybody know if a set of 16 ga barrels would match up to the 20 ga

frame i have for the sxs, its prolly a dumb question but i just figured id ask

because it seems close and i found a set of 16 ga barrels but no luck with

the 20 ga

mr kablammo · November 14, 2010, 11:17 PM

Gun Digest often lists shotgun barrels for sale.

Crash.45 · November 15, 2010, 06:11 PM

hey thanks for the feedback i didnt get much help from the gun digest

website, did you perhaps mean the forums or did you kno of a link to get to

the area you were talking about, thank you

November 7, 2010, 09:40 AM	#1
Crash.45 Member Join Date: September 6, 2009 Location: Lockport Illinois Posts: 38	Stevens 311h 20ga. hello all, i am in need of a barrel assembely for my stevens/savage/springfield etc. model 311h in 20 gauge, the origional barrels were damaged beyond repair, anyone selling some or know where i can get them/ what would be a compatible set to affix to the receiver, for lack of a better description, the barrels basically blew out on the sides, and i have had the gun for a long time and it is a very good hunter, id hate to have it lay around and collect dust now, any information would be greatly appreciated, thanks Last edited by Crash.45; November 7, 2010 at 01:34 PM.

November 7, 2010, 10:11 AM	#2
Hawg Senior Member Join Date: September 8, 2007 Location: Mississippi Posts: 16,189	Numrich might have a set. www.e-gunparts.com might find a set on gunbroker.

November 7, 2010, 02:09 PM	#3
Crash.45 Member Join Date: September 6, 2009 Location: Lockport Illinois Posts: 38	hey hawg, thanks for the information, yea ive been to those sightsalready and no go, i havent been having much luck with my recent searches and am somewhat at a loss so far, anybody have any other ideas??

November 8, 2010, 09:22 PM	#4
Crash.45 Member Join Date: September 6, 2009 Location: Lockport Illinois Posts: 38	bump

November 8, 2010, 09:43 PM	#5
zippy13 Senior Member Join Date: August 23, 2008 Location: SoCal Posts: 6,442	Cash,45 Unfortunately, you may have to buy a complete donor gun for the barrel assembly. Keep your eyes open for someone with a 311 with a broken stock or other problem that would drive the price way down.

November 9, 2010, 05:05 PM	#6
Crash.45 Member Join Date: September 6, 2009 Location: Lockport Illinois Posts: 38	thanks zippy13, i was hoping it would be easier than that but i will definatly keep my eyes open for a cheap donor shotgunas well

November 14, 2010, 07:28 PM	#7
Crash.45 Member Join Date: September 6, 2009 Location: Lockport Illinois Posts: 38	does anybody know if a set of 16 ga barrels would match up to the 20 ga frame i have for the sxs, its prolly a dumb question but i just figured id ask because it seems close and i found a set of 16 ga barrels but no luck with the 20 ga

November 14, 2010, 11:17 PM	#8
mr kablammo Senior Member Join Date: December 18, 2005 Posts: 241	Gun Digest often lists shotgun barrels for sale.

November 15, 2010, 06:11 PM	#9
Crash.45 Member Join Date: September 6, 2009 Location: Lockport Illinois Posts: 38	hey thanks for the feedback i didnt get much help from the gun digest website, did you perhaps mean the forums or did you kno of a link to get to the area you were talking about, thank you