Guns You Wish They'd Make - Page 8

Common Sense · September 14, 2012, 01:08 PM

9mm S&W M&P Shield with full ambi: slide release, safety, mag release. For that matter more full ambi semi-autos in all calibers. Yeah, I'm a lefty. All the guns with ambi mag and safeties without ambi slide release are a waste as the slide release is the hardest to do and IMO the most important.

thedudeabides · September 14, 2012, 07:19 PM

I'd add some more...

P30L in 357 SIG
10mm HK45 variant with a 5'' barrel

proxpilot · September 14, 2012, 07:38 PM

p226 and p229 in .45ACP

Strafer Gott · September 14, 2012, 08:19 PM

I don't know if I'm allowed to play. Last time I wished for a Judge.

BruceM · September 14, 2012, 08:25 PM

For me:

1. Bren Ten
2. Smith & Wesson 1006 but single action only ala S&W M745
2. AutoMAG in .44 AMP, .41 AMP and .357 AMP.

Bruce

treg · September 14, 2012, 09:47 PM

Ruger SR9 and SR40 long slide with 5 - 5 1/2" barrels and target sights.

kudjomojo · September 15, 2012, 01:22 PM

A duo-tone, double stack, 5" 1911 in 10mm with extended safety and cocobolo grips and good night sights. Oh yeah...

Jo6pak · July 26, 2015, 06:31 PM

I know it's an ancient thread. But I have a new wish.

Ruger American Rimfire
.22 long rifle with a 16" fluted heavy barrel, threaded for suppressor. No iron sights and a integrated scope mount rail. Add a synthetic target stock with 2 forward sling swivels (for sling and bipod.)

If they built it, I would order one tomorrow

lifesizepotato · July 26, 2015, 06:50 PM

10mm USP

VP357

Dragline45 · July 26, 2015, 07:36 PM

Quote:

I know it's an ancient thread. But I have a new wish.

Ruger American Rimfire
.22 long rifle with a 16" fluted heavy barrel, threaded for suppressor. No iron sights and a integrated scope mount rail. Add a synthetic target stock with 2 forward sling swivels (for sling and bipod.

You mean kinda like this, it's an 18" barrel, and it's not fluted, but it's as close as you'll get.

simonrichter · July 27, 2015, 08:53 AM

...a 4.5 inch (oal) semiauto .22lr with poly frame...

Elliottsdad · July 27, 2015, 09:32 AM

I'll join in on the necromancy!

If Kel Tec can make a carbine that takes Glock mags, why can't Glock?? I'm not going to waste the albeit small amount of money on a Kel Tec, but I'd pay three or five times that much to have a carbine manufactured by Glock themselves. Beretta figured it out with the Px4/Cx4; come on already, Glock!!

gbclarkson · July 27, 2015, 09:44 AM

Sig 1911 Nightmare in .357Sig as advertised on the website. Anyone actually ever seen one?

Cyanide971 · July 27, 2015, 10:20 AM

I will play along as well lol!

A modernized, improved trigger version of the striker-fire CZ 100 based off of the current P-07 and P-09, respectively.

Tell me it wouldn't sell! HK's VP9 and Sig's P320 both seem to be doing very well, so maybe it is time that CZ join in on the fun and take another stab at it...

JDBerg · July 27, 2015, 10:31 AM

I'd like to see a Walther PPQ M2 chambered in .45 ACP.

I'd like to see Smith & Wesson bring back the 3rd Gen 3913.

Gen5 Glocks should be designed with interchangeable grips, so that you can put a 19/23 compact grip on a 26/27 subcompact frame. Create a new Glock .45ACP Compact using the Glock 38 .45 GAP Compact, i.e. a .45 ACP service pistol in a Glock 19 pattern.

Although not technically a new gun, I'd like to see HK open a Custom Shop!

Kosh75287 · July 27, 2015, 10:20 PM

A Bergmann M1910 with detachable butt-stock, 15-round (or more) detachable magazines, select-fire switch, chambered in 9x25 Dillon.

A Webley MkV made of steel that will withstand .45 ACP pressures, in .45 ACP.

An FN-CAL chambered for 6x45mm.

An FN-FAL chambered for .30x47 or .280 British.

An HK P7 in .40 S&W or .45 ACP with a 1911-style magazine release.

A Ruger XGI in .243 Winchester or 7mm-08 with barrel harmonics done right.

A semi-auto only Walther MPL in 10mm or 9x25 Dillon.

Quote:

A 1911 that doesn't feel like a brick with a handle

It's called a Colt Lightweight Commander. There are other iterations, but I suspect that this was the first. Be careful what you ask for. They kick a third harder than the full-size model.

Whirlwind06 · July 28, 2015, 02:43 PM

After reading though this whole thread is seems like some of the wishes have been answered.

SR45 Yes
LC9 with a better trigger oh yeah.
Single stack Glock in bolth 9mm and .380 yep

I'll add to mine
Yes a Beretta 92 compact a real compact not 3/8 of an inch shorter and 4 ozs lighter. The PX4 SC and compact are in the right direction.

A semi auto carbine in .357 or 44 mag would be awesome.
Oh and while on the subject of carbines, how about pricing them a bit better. If I can get a AR or AK for around 500 - 600. I should be able to get a hi-cap (not HI-point) carbine in the same ball park.

Jo6pak · July 28, 2015, 09:29 PM

Wow, thanks Dragline45.
I've been asking every gun dealer I can find if that rifle exists. Guess I'll have to go down to GM tomorrow with the info and picture to have them order me one. Hope they are still available.

Thanks again.

gyvel · July 28, 2015, 09:43 PM

Said it before, and I'll say it again: A Smith & Wesson Model 45 with no Hillary hole.

scoobysnacker · July 28, 2015, 11:08 PM

Quote:

I'd like to see Smith & Wesson bring back the 3rd Gen 3913

I'd like to see Smith and Wesson bring back the 3rd Generation guns in general; at least a few of them.

JDBerg · July 29, 2015, 08:18 AM

Quote:

I'd like to see Smith and Wesson bring back the 3rd Generation guns in general; at least a few of them.

Agree 100% but I think pigs will fly over Springfield, MA before this happens!

**44 AMP** · July 29, 2015, 10:09 AM

So, you brought back a three year dead thread, In SEMI AUTO HANDGUNS, to ask for a .22RF RIFLE???????

Next time, walk your zombies into the proper boneyard, please...

(and feel free to start a new thread)

Lopti · July 29, 2015, 05:25 PM

Realistic? I want more pistols that shoot the 5.7 other then the (in my opinion) but ugly Five Seven pistol.

Unrealistic? someone needs to make a gun identical to the modded Glock used in the Judge Dredd movies haha, so need to talk to my gun and have it finally respond other then bang...

Cheapshooter · July 29, 2015, 05:33 PM

Well, since this thread has been resurrected I'll play.
Real simple model offering from Ruger.
10-22 Charger Stainless/synthetic!
Second, although this is the semi-auto forum, Ruger LCRx 3" 22 long rifle.

Jo6pak · July 29, 2015, 10:03 PM

Quote:

So, you brought back a three year dead thread, In SEMI AUTO HANDGUNS, to ask for a .22RF RIFLE???????

Next time, walk your zombies into the proper boneyard, please...

(and feel free to start a new thread)

Oops, sorry about that. I did a search to find this thread and didn't make sure of the forum category.

And sometimes when a person starts a new thread about an old topic, they get flamed for not using the search function, so that part is often a lose-lose situation.
As for being in the wrong forum...flame away

September 14, 2012, 07:38 PM	#178
proxpilot Senior Member Join Date: September 9, 2010 Location: High Point, NC Posts: 588	p226 and p229 in .45ACP __________________ W. German SIG Sauer p226 W. German SIG Sauer P6 Springfield Armory XD-S

September 14, 2012, 09:47 PM	#181
treg Senior Member Join Date: November 26, 2006 Posts: 1,102	Ruger SR9 and SR40 long slide with 5 - 5 1/2" barrels and target sights. __________________ .44 Special: For those who get it, no explanation is necessary. For those who don't, no explanation is possible.

September 15, 2012, 01:22 PM	#182
kudjomojo Junior Member Join Date: August 24, 2012 Location: MN Posts: 11	A duo-tone, double stack, 5" 1911 in 10mm with extended safety and cocobolo grips and good night sights. Oh yeah... __________________ "I don't know with what weapons world war three will be fought, but world war four wil be fought with sticks and stones." -Albert Einstien The cost of living is dying. Everybody pays. No fear.

July 26, 2015, 06:31 PM	#183
Jo6pak Senior Member Join Date: August 5, 2010 Location: West Coast...of WI Posts: 1,663	I know it's an ancient thread. But I have a new wish. Ruger American Rimfire .22 long rifle with a 16" fluted heavy barrel, threaded for suppressor. No iron sights and a integrated scope mount rail. Add a synthetic target stock with 2 forward sling swivels (for sling and bipod.) If they built it, I would order one tomorrow __________________ NRA Life Member, SAF contributor.

July 27, 2015, 08:53 AM	#186
simonrichter Senior Member Join Date: December 3, 2011 Location: Austria Posts: 757	...a 4.5 inch (oal) semiauto .22lr with poly frame... __________________ "Get off of my lawn!" Walt Kowalski . ISSC PAR .223

September 14, 2012, 01:08 PM	#176
Common Sense Junior Member Join Date: September 14, 2012 Posts: 1	9mm S&W M&P Shield with full ambi: slide release, safety, mag release. For that matter more full ambi semi-autos in all calibers. Yeah, I'm a lefty. All the guns with ambi mag and safeties without ambi slide release are a waste as the slide release is the hardest to do and IMO the most important.

September 14, 2012, 07:19 PM	#177
thedudeabides Senior Member Join Date: August 22, 2012 Posts: 1,031	I'd add some more... P30L in 357 SIG 10mm HK45 variant with a 5'' barrel

September 14, 2012, 08:19 PM	#179
Strafer Gott Senior Member Join Date: May 12, 2011 Location: New Mexico Posts: 1,315	I don't know if I'm allowed to play. Last time I wished for a Judge.

September 14, 2012, 08:25 PM	#180
BruceM Senior Member Join Date: March 12, 2006 Location: SE Wisconsin Posts: 285	For me: 1. Bren Ten 2. Smith & Wesson 1006 but single action only ala S&W M745 2. AutoMAG in .44 AMP, .41 AMP and .357 AMP. Bruce

July 26, 2015, 06:50 PM	#184
lifesizepotato Senior Member Join Date: January 2, 2011 Posts: 210	10mm USP VP357

July 27, 2015, 09:32 AM	#187
Elliottsdad Senior Member Join Date: November 23, 2010 Location: Glenwood, Iowa Posts: 238	I'll join in on the necromancy! If Kel Tec can make a carbine that takes Glock mags, why can't Glock?? I'm not going to waste the albeit small amount of money on a Kel Tec, but I'd pay three or five times that much to have a carbine manufactured by Glock themselves. Beretta figured it out with the Px4/Cx4; come on already, Glock!!

July 27, 2015, 09:44 AM	#188
gbclarkson Senior Member Join Date: January 4, 2014 Location: None of yer business, sonny Posts: 440	Sig 1911 Nightmare in .357Sig as advertised on the website. Anyone actually ever seen one?

July 27, 2015, 10:20 AM	#189
Cyanide971 Senior Member Join Date: June 1, 2014 Posts: 725	I will play along as well lol! A modernized, improved trigger version of the striker-fire CZ 100 based off of the current P-07 and P-09, respectively. Tell me it wouldn't sell! HK's VP9 and Sig's P320 both seem to be doing very well, so maybe it is time that CZ join in on the fun and take another stab at it... Last edited by Cyanide971; July 27, 2015 at 10:31 AM.

July 27, 2015, 10:31 AM	#190
JDBerg Senior Member Join Date: May 18, 2015 Location: PA Posts: 1,835	I'd like to see a Walther PPQ M2 chambered in .45 ACP. I'd like to see Smith & Wesson bring back the 3rd Gen 3913. Gen5 Glocks should be designed with interchangeable grips, so that you can put a 19/23 compact grip on a 26/27 subcompact frame. Create a new Glock .45ACP Compact using the Glock 38 .45 GAP Compact, i.e. a .45 ACP service pistol in a Glock 19 pattern. Although not technically a new gun, I'd like to see HK open a Custom Shop! __________________ Words to Live By: Before You Pray - Believe; Before You Speak - Listen; Before You Spend - Earn; Before You Write - Think; Before You Quit - Try; Before You Die - Live

July 28, 2015, 02:43 PM	#192
Whirlwind06 Senior Member Join Date: March 3, 2006 Location: NE Ohio Posts: 998	After reading though this whole thread is seems like some of the wishes have been answered. SR45 Yes LC9 with a better trigger oh yeah. Single stack Glock in bolth 9mm and .380 yep I'll add to mine Yes a Beretta 92 compact a real compact not 3/8 of an inch shorter and 4 ozs lighter. The PX4 SC and compact are in the right direction. A semi auto carbine in .357 or 44 mag would be awesome. Oh and while on the subject of carbines, how about pricing them a bit better. If I can get a AR or AK for around 500 - 600. I should be able to get a hi-cap (not HI-point) carbine in the same ball park.

July 28, 2015, 09:29 PM	#193
Jo6pak Senior Member Join Date: August 5, 2010 Location: West Coast...of WI Posts: 1,663	Wow, thanks Dragline45. I've been asking every gun dealer I can find if that rifle exists. Guess I'll have to go down to GM tomorrow with the info and picture to have them order me one. Hope they are still available. Thanks again. __________________ NRA Life Member, SAF contributor.

July 28, 2015, 09:43 PM	#194
gyvel Senior Member Join Date: August 30, 2009 Location: Northern AZ Posts: 7,172	Said it before, and I'll say it again: A Smith & Wesson Model 45 with no Hillary hole. __________________ As always, YMMV. __________________________________________ MIIAA SIFE

July 29, 2015, 10:09 AM	#197
44 AMP Staff Join Date: March 11, 2006 Location: Upper US Posts: 28,818	So, you brought back a three year dead thread, In SEMI AUTO HANDGUNS, to ask for a .22RF RIFLE??????? Next time, walk your zombies into the proper boneyard, please... (and feel free to start a new thread) __________________ All else being equal (and it almost never is) bigger bullets tend to work better.

July 29, 2015, 05:25 PM	#198
Lopti Member Join Date: September 22, 2014 Posts: 19	Realistic? I want more pistols that shoot the 5.7 other then the (in my opinion) but ugly Five Seven pistol. Unrealistic? someone needs to make a gun identical to the modded Glock used in the Judge Dredd movies haha, so need to talk to my gun and have it finally respond other then bang...

July 29, 2015, 05:33 PM	#199
Cheapshooter Senior Member Join Date: December 2, 2007 Location: Missouri Posts: 8,306	Well, since this thread has been resurrected I'll play. Real simple model offering from Ruger. 10-22 Charger Stainless/synthetic! Second, although this is the semi-auto forum, Ruger LCRx 3" 22 long rifle. __________________ Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!