Sig 1911 Grips

BillyJack3 · January 17, 2013, 10:20 PM

Does the Sig 1911 take standard 1911 grips? I picked up a Nitron and want to swap the grips out for something more traditional. Thinking some Ivory would be nice to have. Also, any good, reputable places to pick some up?

Tactical Jackalope · January 17, 2013, 10:56 PM

ImageUploadedByTapatalk1358481267.581762.jpg

Traditional? I'm not sure. I have those on my XO. 10-8 performance. Dirty olive.

I heard something about. Esmeralda? Google Esmeralda grips.

SIG Sauer 1911 XO - Custom Springfield MilSpec 1911 - Colt Gold Cup Trophy Model 1911 - Colt 70 Series 1911 - SIG Sauer P220 - SIG Sauer P226 E2 - Browning High-Power blue & stainless - Glock 17 - Glock 19 - Glock 21SF - Glock 22 - S&W Model 19 - H&k USP 40 - Remington Magnum 870 - Rock River AR-15 “Americans can no longer depend upon legislation to defend them from all who intend to do them harm.”

Technosavant · January 17, 2013, 11:00 PM

Yup, the same grips as any other 1911.

There's any number of places to get 1911 grips; I tend to be partial to Alumagrips but a nice set of wood is very good too.

Flieger67 · January 17, 2013, 11:19 PM

I'll recommend VZ Grips and have them on a couple of my 1911's. However, I also really like the grips that came on my Sig TacOps. They're Ergo XT's and are really inexpensive.

Sent from my iPhone using Tapatalk.

billib · January 18, 2013, 09:47 PM

you will need new grip screws, head OD larger than normal. at least i did on my rcs. i have a pair of esmeralda's (thor's hammer0 on one of mine, beautiful work.

Marquezj16 · January 19, 2013, 04:17 PM

I replace mine with these from Midway.

laytonj1 · January 19, 2013, 11:07 PM

You want really nice grips...
Go here:
http://shop.thefinergrain.com/

Jim

January 17, 2013, 10:20 PM	#1
BillyJack3 Senior Member Join Date: May 2, 2012 Posts: 423	Sig 1911 Grips Does the Sig 1911 take standard 1911 grips? I picked up a Nitron and want to swap the grips out for something more traditional. Thinking some Ivory would be nice to have. Also, any good, reputable places to pick some up?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

January 17, 2013, 10:56 PM	#2
Tactical Jackalope Senior Member Join Date: December 5, 2010 Location: Miami, Florida Posts: 6,429	ImageUploadedByTapatalk1358481267.581762.jpg Traditional? I'm not sure. I have those on my XO. 10-8 performance. Dirty olive. I heard something about. Esmeralda? Google Esmeralda grips. SIG Sauer 1911 XO - Custom Springfield MilSpec 1911 - Colt Gold Cup Trophy Model 1911 - Colt 70 Series 1911 - SIG Sauer P220 - SIG Sauer P226 E2 - Browning High-Power blue & stainless - Glock 17 - Glock 19 - Glock 21SF - Glock 22 - S&W Model 19 - H&k USP 40 - Remington Magnum 870 - Rock River AR-15 “Americans can no longer depend upon legislation to defend them from all who intend to do them harm.”

January 17, 2013, 11:00 PM	#3
Technosavant Senior Member Join Date: May 29, 2007 Location: St. Louis, MO area Posts: 4,040	Yup, the same grips as any other 1911. There's any number of places to get 1911 grips; I tend to be partial to Alumagrips but a nice set of wood is very good too.

January 17, 2013, 11:19 PM	#4
Flieger67 Junior Member Join Date: December 13, 2012 Posts: 7	I'll recommend VZ Grips and have them on a couple of my 1911's. However, I also really like the grips that came on my Sig TacOps. They're Ergo XT's and are really inexpensive. Sent from my iPhone using Tapatalk.

January 18, 2013, 09:47 PM	#5
billib Member Join Date: February 3, 2010 Location: central va Posts: 18	you will need new grip screws, head OD larger than normal. at least i did on my rcs. i have a pair of esmeralda's (thor's hammer0 on one of mine, beautiful work.

January 19, 2013, 04:17 PM	#6
Marquezj16 Senior Member Join Date: April 3, 2011 Posts: 2,088	I replace mine with these from Midway.

January 19, 2013, 11:07 PM	#7
laytonj1 Senior Member Join Date: June 1, 2005 Posts: 4,443	You want really nice grips... Go here: http://shop.thefinergrain.com/ Jim