November 16, 2012, 08:44 AM | #1 |
Senior Member
Join Date: October 24, 2010
Location: Austin, Texas
Posts: 3,318
|
.44-40
I got a nice 7.5" Colt SAA and really like it. Better factory ammo than the .44 special.
Very accurate. Anybody else like this round? |
November 16, 2012, 08:55 AM | #2 |
Senior Member
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 2,989
|
I like both the .38-40 and the .44-40. But I'm not interested in getting into another cartridge for which I currently have no dies.
I load .38 Special, .357 Magnum, .44 Special, .44 Magnum, .45 ACP and AR, and .45 Colt. That's enough for me for now. Bob Wright |
November 16, 2012, 09:13 AM | #3 |
Senior Member
Join Date: September 3, 2011
Location: Poteet, Texas
Posts: 959
|
The reason more people stay away for the .44-40 is that you loose some brass ton the reloading process. Likely not as much as they think but the impression is there.
|
November 16, 2012, 09:44 AM | #4 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
New loaders of the round tend to lose a good amount of brass early in the process, with the level tailing off dramatically as they learn the little tricks, nuances, and magic incantations necessary to prevent crushing the paper thin neck.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
November 16, 2012, 09:55 AM | #5 | |
Senior Member
Join Date: November 21, 2011
Location: Southern Louisiana
Posts: 1,399
|
Quote:
Is it just loaded hotter? How does it compare to .41 Magnum or .44 Magnum? |
|
November 16, 2012, 11:06 AM | #6 |
Senior Member
Join Date: March 7, 2008
Location: central Illinois
Posts: 451
|
My only 44-40 is a Colt convertable. I can load for either but prefer the 44 special cylinder. It's mostly just a case of the Special requiring less work to reload. (lubing, concerns about crushing, finicky with crimp, etc)
__________________
Mark Lane to William Buckley: "Have you ever referred to Jessee Jackson as an ignoramus?" Buckley: "If I didn't, I should have" |
November 16, 2012, 12:08 PM | #7 |
Senior Member
Join Date: October 24, 2010
Location: Austin, Texas
Posts: 3,318
|
Better as in 200 grains @ 1000 fps vs 246 @ 750.
|
November 16, 2012, 12:29 PM | #8 |
Senior Member
Join Date: July 30, 2011
Location: Savannah TN
Posts: 1,220
|
I have one that I like a lot although I probably don't shoot it enough.
On a side note: Technically, a single action Colt in .44-40 is called a Frontier Six Shooter. The Single Action Army was called that originally because it was chambered for the .45 cal army round. |
November 16, 2012, 01:46 PM | #9 | |
Senior Member
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 2,989
|
highpower 3006 wrote:
Quote:
Bob Wright |
|
November 16, 2012, 01:50 PM | #10 | |
Senior Member
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 2,989
|
kcub:
Quote:
The highest velocity with IMR 800X is only around 967 fps max. according to Hodgdon's tables. Bob Wright Last edited by Bob Wright; November 16, 2012 at 01:56 PM. |
|
November 16, 2012, 07:51 PM | #11 |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,468
|
[QUOTE45 Auto][Quotekcub]Better factory ammo than the .44 special.[/quote]
What makes 44-40 factory ammo "better" than .44 Special?[/QUOTE] I have the same question. What's better about .44-40 over .44 Special? |
November 16, 2012, 07:59 PM | #12 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
The main problem with reloading 44-40 is the original bores were .427. Modern 44-40's are .429. Most dies still size to .427 so when you try to stuff a .430 bullet into one it crushes the neck. RCBS makes cowboy dies that size to .429 or you can use a 44 mag expander plug.
|
November 17, 2012, 10:29 AM | #13 |
Senior Member
Join Date: March 7, 2008
Location: central Illinois
Posts: 451
|
Hawg makes a good point. Correct Sizing is very important in this calibre with it's (relatively) fragile brass. The 44-40 dates to the black powder era and it's brass was designed for use with the lower pressures of the age. As such it is thinner and more easily damaged in reloading than the 44 special. Not a big problem but requires a bit more attention to detail when loading.
__________________
Mark Lane to William Buckley: "Have you ever referred to Jessee Jackson as an ignoramus?" Buckley: "If I didn't, I should have" |
November 18, 2012, 06:10 AM | #14 | |
Senior Member
Join Date: May 17, 2004
Location: NC Piedmont/Foothills
Posts: 666
|
re:
Quote:
Oh! Almost forgot. SKeet's pet load was a 250-grain Keith and 7.5 grains of Unique. YMMV
__________________
If your front porch collapses and kills more than three dogs...You just might be a redneck |
|
November 18, 2012, 06:58 AM | #15 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
"The 44-40 dates to the black powder era and it's brass was designed for use with the lower pressures of the age."
Which is interesting because... Smith & Wesson developed the .44 Special with black powder. It was the last commercial black powder cartridge developed, and was, for quite a few years, sold in both black powder and smokeless rounds.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
November 19, 2012, 05:33 PM | #16 |
Senior Member
Join Date: March 7, 2008
Location: central Illinois
Posts: 451
|
Interesting.
The 44-40 (44 W.C.F) preceedes the special by around 35 years. I didn't know the 44 special was ever loaded with black powder. I wasn't aware that any new cartridges developed in the 20th century were designed around black powder.
__________________
Mark Lane to William Buckley: "Have you ever referred to Jessee Jackson as an ignoramus?" Buckley: "If I didn't, I should have" |
November 19, 2012, 07:10 PM | #17 |
Senior Member
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 2,989
|
The first .38 Special rounds were blackpowder.
Incidentally, most rounds were also loaded with "semi-smokeless" powder such as Lesmoke. Lesmoke produced less flash and smoke than blackpowder, and less pressure than smokeless. Old cartridges that have copper primers are blackpowder, brass primers are semi-smokeless, nickel primers are smokeless. This for older rounds only. Bob Wright |
November 19, 2012, 08:40 PM | #18 |
Senior Member
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,719
|
I like it - currently have 12 and have had 7 others. (Rifles & revolvers both)
I really like the .38-40 too, but only have 10 at the moment. (3 revolvers, 7 rifles)
__________________
Sometimes the squeaky wheel gets replaced... SASS 47015 |
November 24, 2012, 08:17 AM | #19 |
Senior Member
Join Date: October 24, 2010
Location: Austin, Texas
Posts: 3,318
|
I shot it again yesterday.
One hole groups when I do my part. Sights regulated perfectly. I heart Colt. |
November 25, 2012, 11:09 PM | #20 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
Lesmoke power was virtually never used for centerfire cartridges, it wasn't really suitable.
It was primarily a .22 propellant. Other semi-smokeless, or bulk black powder replacement, propellants were suitable for use in centerfire cartridges. The last references I've been able to find to black powder loaded .38 Special are from about 1922.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
November 27, 2012, 07:30 AM | #21 |
Senior Member
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
|
I have one revolver in 44-40 ( an old H Schmidt 357 conversion )... I like to shoot it, & I do reload for it... it's kinda quirky like a 22 Hornet to reload... I guess I've never really gotten into it the same as my straight wall revolver cartridges ( I do 3 different loads in 45 Colt, that cover from cowboy loads, to near 454 Casull loads ) ( load for 454 Casull as well as 44 Special, & 44 Mag ) so the 44-40 is just an interesting gun to shoot, not one of my "main squeezes"
__________________
In life you either make dust or eat dust... |
|
|