|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
December 25, 2012, 08:39 AM | #1 |
Junior Member
Join Date: December 17, 2012
Location: San Antonio Texas
Posts: 7
|
Winchester 94-44mag feeding problem
Hello everyone I'm a new user so if anyone can help I'd appreciate it. I was just given a Model 94 by my father today for Christmas since he no longer uses it. My problem is I was told by him it is having a feeding problem that causes it to jam. How can I correct this ?
|
December 25, 2012, 08:54 AM | #2 |
Senior Member
Join Date: December 31, 1999
Location: Middle Georgia, USA
Posts: 13,198
|
Let's try the Smithy. If we don't get a reasonable reply in a day or two, PM me and we'll move this to Rifles. - Bud
|
December 25, 2012, 09:44 AM | #3 |
Junior Member
Join Date: December 17, 2012
Location: San Antonio Texas
Posts: 7
|
Thanks I appreciate the help.
|
December 25, 2012, 10:16 AM | #4 |
Senior Member
Join Date: December 27, 2008
Posts: 555
|
I really think you will need to be much more specific with the exact problem, i.e. exact rifle model, stovepipes loaded or empty, bullet profile and O.A.L., etc. to be able to get any feedback.
The 94 action was re-engineered for the .44 cartridge. Is the gun a factory .44 or a re-barrel? The Devil is in the details. Posting this to let you get a head start on your end to speed up the advice you will get. Photos and terminology. Photos are best if you are not up on the gun's parts names. Load up a few dummy rounds to use in showing the problem. If you are not a reloader, you'll need to photograph live rounds. This should only be done with a safe backstop for any inadvertent discharge. Just my take, JT |
December 25, 2012, 02:57 PM | #5 |
Junior Member
Join Date: December 17, 2012
Location: San Antonio Texas
Posts: 7
|
Hey Jt thanks for the info. Its a post 64 model 94 top eject. Sn 3251238. I found out it is a 1969 manufacture. When I load the tube and fire the round upon ejection when the new one loads it doesn't ramp up all the way into the barrel.It is a factory 44 mag
|
December 25, 2012, 06:50 PM | #6 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,188
|
Could be a bent lifter. The 94 action was designed for a rifle cartridge and many do not handle pistol calibers well at all.
|
December 25, 2012, 08:22 PM | #7 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Hawg is correct, and also there are ammunition issues, especially with reloads. What ammo are you using? And what exactly is happening?
If the bullet is hitting the edge of the chamer, the problem could be the bullet shape and you might try another brand. Jim |
December 25, 2012, 08:36 PM | #8 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,188
|
Quote:
|
|
December 26, 2012, 03:48 AM | #9 |
Junior Member
Join Date: December 17, 2012
Location: San Antonio Texas
Posts: 7
|
Hawq I'll check out the lifter. James i currently do not know what ammo my father was using but ill find out and try a different brand.
|
December 26, 2012, 08:56 AM | #10 |
Senior Member
Join Date: February 3, 2007
Location: NE Ohio
Posts: 257
|
I was looking at one once and I was told by a former owner that all the lever guns in pistol cartridge seem to need a swift leverthrow to make them work right. He said they just weren't very reliable unless you really jacked them EVERY time. Seemed to be the consensus from about everyone who ever owned one. Even my Marlin 30-30 didn't want to work well if I didn't make it a swift leverthrow.
|
December 26, 2012, 09:54 AM | #11 | |
Senior Member
Join Date: December 24, 2010
Location: Central Louisiana
Posts: 3,137
|
Quote:
All this is not to say that the rifle might not have mechanical problems. If you've got a bent lifter, you'll have to replace it. And, some pistol-caliber 94s have more trouble than others. The action was designed for the .30-30 class of cartridge and some have trouble with pistol length cartridges. |
|
December 27, 2012, 08:38 AM | #12 |
Junior member
Join Date: February 2, 2008
Posts: 3,150
|
If the parts are in spec and properly fitted there is no need to jack the lever hard. It needs to be jacked all the way forward and back but not hard. If a part is defective or spring is shot and you keep abusing it to make it function you're just going to mess up more parts. Have it fixed or trade it off. I have 2 Win. 94s in pistol calibers and they will both cycle rounds perfectly no matter how slowly you work the lever. They have been that way since they were new 20 years ago.
|
December 30, 2012, 08:36 PM | #13 |
Junior Member
Join Date: December 17, 2012
Location: San Antonio Texas
Posts: 7
|
I really appreciate all the info yall guys have been giving me. I took a look and it does look like i might have a slightly bent lifter. Im gonna order one from Numeric and replace it just to be on the safe side.
|
Thread Tools | Search this Thread |
|
|