|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 12, 2009, 04:00 PM | #1 |
Member
Join Date: December 1, 2008
Location: Colesburg, IA
Posts: 61
|
Can anyone tell me about this pistol
IMG_0928.jpg
Looking for any information on this pistol and how to dissasemble it. Having some problems with the hammer not catching. |
March 12, 2009, 04:24 PM | #2 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,541
|
The illustrated pistol is a Warnant ("trapdoor") style Flobert, probably of Belgian make, and not very expensive when new. It is what I think of as the "least weak" of a dinky line of low powered guns.
I don't know how to get one apart, but there are only so many pins and screws to work with. Be prepared for the liklihood that the soft metal of the hammer or/and sear or set trigger engagements are just flat worn out. If you get it going, I would recommend sticking to CB caps. |
March 12, 2009, 09:57 PM | #3 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Removing the breechblock screws (you already have one out) should allow the breechblock to come free.
The other parts should come out easily once you remove the stock which is probably held on by a screw in the bottom of the stock; it may be the same screw that holds the trigger guard. The original Flobert system didn't have a breechblock or firing pin. The heavy hammer had a firing stud on the front and its weight and inertia held the breech closed against the low power cartridge. The gun here is an upgraded version with a separate breechblock which would probably hold against a standard velocity Short, but I wouldn't count on it to hold anything in .22 LR. Jim |
March 13, 2009, 08:37 AM | #4 |
Member
Join Date: December 1, 2008
Location: Colesburg, IA
Posts: 61
|
pistol
Thanks so much for your help!
|
|
|