Where to get brass

south.texas.dead.I · April 16, 2013, 11:18 PM

What's the best place right now for .45 acp brass? I need some more, and by best I mean cheapest once fired

.45ACP small pistol primer!

Fire_Moose · April 17, 2013, 02:26 AM

Shooting range

rajbcpa · April 17, 2013, 06:51 AM

gun auction sites.....

Beanie-Bean · April 17, 2013, 10:23 AM

I've ordered some from here before, and never had any issues with the product, or with the owner.

http://www.leobrass.com/store/

Beanie-Bean · April 17, 2013, 10:25 AM

Another place where I've ordered from and have had good luck:

http://www.once-fired-brass.com/prod...m?refresh=true

codefour · April 17, 2013, 11:19 AM

You might want to post this in the WTB WTT WTS forum. I trade brass all the time. It only costs shipping.

I have some 45 ACP to trade if u have anything I need. PM me and let me know.

BigJimP · April 17, 2013, 03:32 PM

Sweep it up - off the floor of your local range....

.45 acp is one of the most durable cases out there..../ I can't tell you how many times I reload a case --- and the only reason I reject one is if it looks really nasty after I clean them....or mostly I just lose them, because they bounce all over on the concrete floors at my range....
-------
Now, if you were looking for something like 10mm....I'd be more careful about picking up range cases...in a high pressure case like that....but .45 acp is easy to find.

wateroperator1972 · April 17, 2013, 09:27 PM

Go to local shooting range. Pick them up along with all the other brass you can find!

joneb · April 17, 2013, 11:07 PM

Quote:

I need 243! Do you have any?

I have some 243 Win. 38 ct R-P and 16 FC
PM me if interested.

Airman Basic · April 18, 2013, 04:23 AM

Also have 243 brass. Need 44 mag brass. If interested, let me know.

schmellba99 · April 18, 2013, 11:48 AM

If anybody needs .30-06 brass, let me know. I probably have 750-800 available.

Axelwik · April 18, 2013, 04:53 PM

I seem to end up with twice as much 45 brass as I bring when I go to the local indoor shooting range.

Airman Basic · April 18, 2013, 05:31 PM

Doesn't seem to happen that often with revolver brass, especially 44. Doubt much of it ever hits the ground.

April 16, 2013, 11:18 PM	#1
south.texas.dead.I Senior Member Join Date: February 5, 2011 Posts: 282	Where to get brass What's the best place right now for .45 acp brass? I need some more, and by best I mean cheapest once fired .45ACP small pistol primer! Last edited by south.texas.dead.I; April 18, 2013 at 07:52 PM.

April 17, 2013, 02:26 AM	#2
Fire_Moose Senior Member Join Date: January 16, 2013 Posts: 211	Re: Where to get brass Shooting range

April 17, 2013, 10:23 AM	#4
Beanie-Bean Member Join Date: October 4, 2011 Location: Central TX Posts: 87	I've ordered some from here before, and never had any issues with the product, or with the owner. http://www.leobrass.com/store/ __________________ Ammo by Dillon and Hornady

April 17, 2013, 10:25 AM	#5
Beanie-Bean Member Join Date: October 4, 2011 Location: Central TX Posts: 87	Another place where I've ordered from and have had good luck: http://www.once-fired-brass.com/prod...m?refresh=true __________________ Ammo by Dillon and Hornady

April 17, 2013, 06:51 AM	#3
rajbcpa Senior Member Join Date: August 27, 2012 Posts: 321	gun auction sites.....

April 17, 2013, 11:19 AM	#6
codefour Senior Member Join Date: April 2, 2012 Posts: 114	You might want to post this in the WTB WTT WTS forum. I trade brass all the time. It only costs shipping. I have some 45 ACP to trade if u have anything I need. PM me and let me know.

April 17, 2013, 03:32 PM	#7
BigJimP Senior Member Join Date: February 23, 2005 Posts: 13,195	Sweep it up - off the floor of your local range.... .45 acp is one of the most durable cases out there..../ I can't tell you how many times I reload a case --- and the only reason I reject one is if it looks really nasty after I clean them....or mostly I just lose them, because they bounce all over on the concrete floors at my range.... ------- Now, if you were looking for something like 10mm....I'd be more careful about picking up range cases...in a high pressure case like that....but .45 acp is easy to find.

April 17, 2013, 09:27 PM	#8
wateroperator1972 Junior Member Join Date: November 25, 2012 Posts: 9	Go to local shooting range. Pick them up along with all the other brass you can find!

April 18, 2013, 04:23 AM	#10
Airman Basic Senior Member Join Date: April 12, 2013 Location: South of Interstate 20 Posts: 219	Also have 243 brass. Need 44 mag brass. If interested, let me know.

April 18, 2013, 11:48 AM	#11
schmellba99 Senior Member Join Date: January 8, 2008 Posts: 803	If anybody needs .30-06 brass, let me know. I probably have 750-800 available.

April 18, 2013, 04:53 PM	#12
Axelwik Senior Member Join Date: March 12, 2012 Location: Land of Enchantment Posts: 436	I seem to end up with twice as much 45 brass as I bring when I go to the local indoor shooting range.

April 18, 2013, 05:31 PM	#13
Airman Basic Senior Member Join Date: April 12, 2013 Location: South of Interstate 20 Posts: 219	Doesn't seem to happen that often with revolver brass, especially 44. Doubt much of it ever hits the ground.