|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
December 22, 2009, 11:04 PM | #1 |
Junior Member
Join Date: December 22, 2009
Posts: 6
|
Mossberg 935 reassemble Help need to go hunting
The slide got stuck half open, So I started taking it apart. well I took the trigger assembly out and don’t no how to put that back together, the slide is still stuck half open ,it will not move forward or back. Looking into were the trigger was I see that there is a metal shaft that is abut say 3" long with a the middle cut out . It seems to be shifted to the left does this need to go in to the butt of the gun?? If some one can reply with a link that shows a diagram of the full assembly of this gun would be great.
Last edited by 12dinomag; December 22, 2009 at 11:11 PM. |
December 22, 2009, 11:36 PM | #2 |
Senior Member
Join Date: March 5, 2008
Location: Sunny California
Posts: 1,281
|
it literally took me 15 seconds on google to find this. the 500 is practically the same as the 535.
http://www.youtube.com/watch?v=oKbWcPdTRBI |
December 22, 2009, 11:43 PM | #3 |
Junior Member
Join Date: December 22, 2009
Posts: 6
|
not the same
this is a pump i need the auto and its the 935 not the 535.
|
December 23, 2009, 12:06 AM | #4 |
Senior Member
Join Date: March 5, 2008
Location: Sunny California
Posts: 1,281
|
I need to read more carefully. I assumed it was the 535. anyway, i dont have one of those so the best i can do is this.
http://74.125.155.132/search?q=cache...ient=firefox-a |
Thread Tools | Search this Thread |
|
|