December 2, 2012, 10:45 AM | #1 |
Senior Member
Join Date: February 24, 2012
Location: South Texas
Posts: 2,126
|
Plastic Frames Pistols
So are the new plastic frame guns the front wheel drive sedan's of the gun world? They do things just about as well or better than conventional metal frame guns but is there something missing, personality, etc..... I've got a few and can't complain, well except you can't put some pretty wood grips on them.
|
December 2, 2012, 11:05 AM | #2 |
Senior Member
Join Date: October 29, 2011
Posts: 1,765
|
I have both and they each have their place. I prefer my metal frame SIG pistols except where weight is a factor and then I also own poly frame pistols - a Gen 2 Glock 19 and Walther PPQ.
My next purchase most likely will be another metal frame pistol, probalby a SIG X-Five Allround 9MM and then get some nice Nills grips to put on it. |
December 2, 2012, 11:12 AM | #3 |
Senior Member
Join Date: February 5, 2012
Location: South Florida
Posts: 199
|
I grew up in the day of the revolver.
the only auto was the 1911. My dad was a cop when I was in high school, and he carried a S&W .357 chrome with pachmire grips. There is some value to a revolver, they don't jam. They are pretty to look at. Other than that, I carry a Sig Sauer 9mm. greater capacity ammo, as reliable if you take care of it. there is a faction of gun owners that are all about wood furniture an if its a old gun its a good gun. Personally I prefer a good synthetic grip/stock that functions before looks. If I am forced to use a weapon in a combat setting, I very well may be using it as a hammer/club to what ever need arises. Try that with old wood grips. No thanks. Give me a good synthetic polymer frame and handle on a modern gun any day. |
December 2, 2012, 11:19 AM | #4 |
Senior Member
Join Date: August 22, 2012
Posts: 1,031
|
If you prove to me that a striker fired gun with a long trigger pull, trigger safety, no barrel bushing, and a short barrel shooting Satan's ammo (40 SW) is more accurate than a 5'' SAO 1911 45 ACP with a trigger job and match barrel, I will GIVE you my Wilson Combat.
Most plastic gun fans have never shot a 1911 or a real revolver. |
December 2, 2012, 03:05 PM | #5 |
Junior member
Join Date: February 2, 2008
Posts: 3,150
|
No, they CAN'T do things just as well or better than conventional metal frames. But as long as people believe they do they will sell all they can squirt out of a mold. They can be manufactured for much less than a machined steel frame (but you will pay almost the same price for the cheap plastic). I agree with the dude. Most of these young guys bloviating about their "perfect" plastic pistols are completely astounded when you hand them a properly built 1911 or S&W N Frame. I just love the look on their faces when they fire one. Then they usually mumble something about how their plastic gun holds 17 rounds to which I have to reply, "you must plan on missing a lot". Oh, and front wheel drive ain't all that great either.
Last edited by drail; December 2, 2012 at 03:14 PM. |
December 2, 2012, 05:11 PM | #6 |
Senior Member
Join Date: August 18, 2009
Posts: 826
|
Plastic frames generally cost less than $5.00 to make. They do not require expensive machining to final tolerances, either. So, they are much more profitable for the gun companies. That is MOST of the reason for their existence.
The all-metal guns which are still in production are increasingly being moved to off-shore production (to decrease labor costs). The remaining domestically-produced all-metal guns are becoming the top end of the market, price wise, at a rapid pace. A thoroughly unfortunate trend, in my opinion....but no doubt inevitable, given the cost/ profit difference. |
December 2, 2012, 05:57 PM | #7 | |
Senior Member
Join Date: September 15, 2010
Posts: 1,850
|
Quote:
There is absolutely nothing better for me to tote around as a defensive weapon than my compact 9 mm polymer pistol. I don't understand why that offends anyone. It does exactly what it is designed to do very well at a reasonable cost. I do not care that the production methods have changed and the end product feels "cheap" to some. Please do not tell me my choice is uninformed-it is not. Use what you want. I will continue to enjoy all of the above.
__________________
"Any fool can criticize, condemn and complain and most fools do." Benjamin Franklin |
|
December 2, 2012, 06:15 PM | #8 | |
Senior Member
Join Date: May 22, 2011
Posts: 12,182
|
Quote:
__________________
Know the status of your weapon Keep your muzzle oriented so that no one will be hurt if the firearm discharges Keep your finger off the trigger until you have an adequate sight picture Maintain situational awareness |
|
December 2, 2012, 07:16 PM | #9 | ||
Senior Member
Join Date: January 23, 2006
Location: Plano, Texas
Posts: 3,062
|
Quote:
A Glock, HK, or SIG plastic pistol is accurate enough for anything a soldier or police officer will shoot at. Quote:
I own a dozen Hi Powers, four 1911's and six double action revolvers......any of which would be a fine choice for a carry gun......but I'll take any Glock as my carry gun (in any caliber) before i'll take any of my pretty guns. 1911 fanboys are every bit as obnoxious as Glock fanboys.
__________________
Need a FFL in Dallas/Plano/Allen/Frisco/McKinney ? Just EMAIL me. $20 transfers ($10 for CHL, active military,police,fire or schoolteachers) Plano, Texas...........the Gun Nut Capitol of Gun Culture, USA https://www.youtube.com/watch?v=pELwCqz2JfE |
||
December 2, 2012, 07:27 PM | #10 | ||
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,931
|
Quote:
Quote:
I find it interesting to see how many people apparently believe that if someone has a different opinion than they do on a particular topic, it must be due to lack of experience or ignorance.
__________________
Do you know about the TEXAS State Rifle Association?
|
||
December 2, 2012, 07:39 PM | #11 |
Senior Member
Join Date: May 9, 2010
Location: USA
Posts: 1,212
|
"Plastic frames generally cost less than $5.00 to make. They do not require expensive machining to final tolerances, either. So, they are much more profitable for the gun companies. That is MOST of the reason for their existence.
The all-metal guns which are still in production are increasingly being moved to off-shore production (to decrease labor costs). The remaining domestically-produced all-metal guns are becoming the top end of the market, price wise, at a rapid pace. A thoroughly unfortunate trend, in my opinion....but no doubt inevitable, given the cost/ profit difference." You seem to be forgetting the extensive design, testing, massive investment in tooling costs. I would imagine the tooling to make polymer framed items is a lot more custom than a mill and a lathe also. Poly frame guns, for the most part, end up costing less than a metal frame gun for the end user, as well as manufacturer. |
December 2, 2012, 08:18 PM | #12 |
Senior Member
Join Date: November 14, 2008
Posts: 355
|
Polymer guns just cost less to produce; it's really that simple. It's not because they expect them to be more rugged or last longer. They can be very accurate, at least when new. Many guys buying pistols these days end up shooting silhouette targets at indoor 7yd and 15yd range and are happy with that.
I doubt you'll see many polymer pistols out in the hunting fields, or on the 25yr/50yd line at bullseye matches though. They do, however, make acceptable holes in things at close range which is what most pistols are used for in any case. |
December 2, 2012, 08:19 PM | #13 | |
Senior Member
Join Date: October 3, 2012
Posts: 1,229
|
Quote:
|
|
December 2, 2012, 08:20 PM | #14 |
Senior Member
Join Date: June 24, 2012
Posts: 1,055
|
Mr. McGuire: I just want to say one word to you. Just one word.
Benjamin: Yes, sir. Mr. McGuire: Are you listening? Benjamin: Yes, I am. Mr. McGuire: Plastics. |
December 2, 2012, 08:56 PM | #15 |
Senior Member
Join Date: February 24, 2012
Location: South Texas
Posts: 2,126
|
Maybe I'm not up to speed, but whats with the 40S&W being called "Satan's Ammo"? Pretty good round in my opinion.
|
December 2, 2012, 09:02 PM | #16 |
Senior Member
Join Date: February 16, 2012
Posts: 306
|
I've shot and owned several solid metal handguns and liked them over the years.
For less than a year I've owned a couple of plastic Glocks. In that time....... .....I've ran more rounds through them than any other pistol I've owned or shot. .....shot more accurately than I would have ever believed. .....shot more times without malfunctions than I would have ever believed. .....actually enjoyed practice more (see above) .....only cleaned them once or twice and have never had to oil the exterior once for corosion protection. ......liked how the grip is temperature neutral in weather extremes. .....enjoyed how much lighter they are than a full sized "metal" gun while carrying. .....gladly bought my wife one when her face lit up after shooting the first one we bought. (she used to CC and shoot a .38sp) .....bought two great defensive pistols for the same price as one decent 1911. Don't get me wrong, I would dearly love to own a 1911 for a high end six gun, but that would be placing "wants" in front of "needs" in my case. |
December 2, 2012, 09:10 PM | #17 |
Senior Member
Join Date: June 20, 2011
Location: Texas
Posts: 1,185
|
Plastic just doesn't give me that feeling of pride that I get from steel. As for function I guess it is okay. It just doesn't thrill me. At least I haven't found a poly frame that I can really admire. There are a few I am considering purchasing. Maybe I will find that magic poly frame some day, but I haven't seen it yet. If you like your poly, more power to you. It's just not for me.
__________________
This is my gun. There are many like her, but this one is mine. I'm not old. I'm CLASSIC! |
December 2, 2012, 09:38 PM | #18 | ||
Senior Member
Join Date: August 9, 2011
Posts: 1,293
|
Quote:
Quote:
Last edited by TMD; December 3, 2012 at 07:28 AM. |
||
December 2, 2012, 10:25 PM | #19 |
Senior Member
Join Date: February 24, 2012
Location: South Texas
Posts: 2,126
|
New???? in regards to if you consider how long center fire handguns have been around, I am fully aware of when Gaston Glock moved from home appliances to the "plastic gun" able to get past metal detectors.
|
December 2, 2012, 10:26 PM | #20 | |
Senior Member
Join Date: November 21, 2011
Location: Southern Louisiana
Posts: 1,399
|
Quote:
|
|
December 2, 2012, 10:44 PM | #21 |
Senior Member
Join Date: November 14, 2008
Posts: 355
|
Accuracy in handguns is very subjective, and depends on what game(s) you play and what your expectations are. Action guys are happy to center a silhouette at 7yds, and a pie plate at 15. Us older bullseye guys throw out anything that can't hold 2", 10shot groups at 50yds.
Both can fill the need, but they are different needs. |
December 2, 2012, 10:58 PM | #22 | |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,931
|
Quote:
I read a lot of reviews, including ones of very expensive, metal-framed handguns fired from machine rests, and offhand, I don't recall reading about any off-the-shelf centerfire semi-autos that meet that spec. What I'm getting at is that if you have a pistol that will shoot 10 shots into 2" at 50 yards then it's safe to say that it didn't shoot like that out of the box and also that the things that make it so accurate have little to do with the frame material. Which means that if you're going to denigrate plastic framed pistols for not being able to hold 2" ten shot groups at 50 yards, that same negativity applies to any off-the-shelf pistol, regardless of frame material.
__________________
Do you know about the TEXAS State Rifle Association?
|
|
December 2, 2012, 11:02 PM | #23 |
Senior Member
Join Date: July 20, 2005
Location: Indiana
Posts: 10,435
|
While I don't have anything against polymer frames, I've yet to come across a polymer-framed gun that could fit my needs/wants better than a steel-framed gun could. Weight is not a huge concern to me as I believe in using a quality holster and belt, I don't see polymer offering a huge advantage in corrosion resistance over a stainless steel gun, and all the polymer guns I'd be interested in cost as much or more than a steel gun of comparable quality.
What I really don't care for, however, are striker-fired guns because I've never found one that had as smooth and/or crisp a trigger as I can find on a hammer-fired gun. While it's true that some are better than others, in my experience they still range from just OK (Walther PPQ) to kind of gritty (Glocks) to a mile of grit and sand (CZ-100). |
December 2, 2012, 11:29 PM | #24 |
Senior Member
Join Date: November 14, 2008
Posts: 355
|
"What off the shelf centerfire semi-autos, regardless of type of trigger action or frame material do you find that are able to meet that accuracy spec?"
I don't remember stating that this accuracy spec. had to be met from the factory, but I'm told there are makers out there that can do it. Way out of my league though, price-wise. I do own an old springfield 1911 wadgun that has a good BarSto barrel and tight bushing that will do it though. Even have an inexpensive RIA GI with a tight $30 bushing that comes very close. My M9, not even close; at least not yet. "I read a lot of reviews, including ones of very expensive, metal-framed handguns fired from machine rests, and offhand, I don't recall reading about any off-the-shelf centerfire semi-autos that meet that spec. What I'm getting at is that if you have a pistol that will shoot 10 shots into 2" at 50 yards then it's safe to say that it didn't shoot like that out of the box and also that the things that make it so accurate have little to do with the frame material." I'm told that the AMU struggled for years trying to get the Berreta M9 to shoot as accurate as their 1911's, and those frame were alloy. A friend of mine shoots with them and I've seen their solution. A big part of it was to add steel rails back into those alloy frames. "Which means that if you're going to denigrate plastic framed pistols for not being able to hold 2" ten shot groups at 50 yards, that same negativity applies to any off-the-shelf pistol, regardless of frame material. " You're right on there. That would be true for anyone still shooting bullseye today, which is why 1911 gunsmiths are held in high regard. I'm not denegrating polymer guns, they have their place. I just doubt it will ever be in bullseye though. |
December 2, 2012, 11:30 PM | #25 | |
Senior Member
Join Date: January 9, 2011
Location: Land of the Free
Posts: 2,834
|
Quote:
Huge Glock fan boy, my daily CCW is 26&19. |
|
Thread Tools | Search this Thread |
|
|