|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
November 16, 2012, 11:25 PM | #1 |
Senior Member
Join Date: November 28, 2011
Location: New York
Posts: 393
|
Ammo Oxidation and how to prevent it?
So I had about 10 boxes of .30-06 ammo hanging around for whenever I felt like having fun. I havent touched any of them in, maybe 4-5 months. That was the last time I've gotten to go shooting. You're probably wondering "how does this guy survive?"
haha, but anyway, I noticed that the brass casing actually started to oxidize a little bit. It has a few slight "blotches" of dark marks. The bullets themselves seem fine. I was curious. This hasn't happened before, so I decided to look at my .22 ammo. My half-used box of Federal bulk .22 had also started to oxidize. The oxidation on the casing was negligible, but the copper jacket on the bullet had started to become dark! Then, to my surprise, I checked some leftover Winchester 333 ammo. The bullets and casings were perfect, even though they were with the Federal and .30-06 ammo... As for the oxidation, I could imagine keeping the ammo in a humid place could expose them to excess moisture, and my old house was definitely humid. But why would the Remington .30-06 and Federal .22 ammo oxidize and the Winchester not? The winchester has been laying around for about 2 years now, much longer than the others! Now, I've started to keep my ammo in ammo cans and I was wondering how I could prevent oxidation. I know ammo cans are pretty much immune to outside water, but what about any moisture that could be trapped inside? I'm sure if I left it for 10 years and checked it, they will have been affected? Would a couple little packets of dessicant do the trick? Thanks |
November 17, 2012, 03:04 AM | #2 |
Senior Member
Join Date: April 10, 2012
Location: San Diego CA
Posts: 6,875
|
some 22 ammo has a wax coating on them . That would keep them looking good longer .
I use these packets in my ammo cans to absorb mosture http://www.amazon.com/Dry-Packs-Cott...isture+packets
__________________
If Jesus had a gun , he'd probably still be alive ! I almost always write my posts regardless of content in a jovial manor and intent . If that's not how you took it , please try again . |
November 17, 2012, 05:23 AM | #3 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
You're assuming that it's 'oxidation '. Copper and it's alloys usually form a sulfide though it can also oxidize. It can also react to ammonia compounds . Cracked case necks -is caused by stress corrosion cracking .Thunderstorms create ammonia compounds from nitrogen in the air .
It's too early to give metallurgy lessons .
__________________
And Watson , bring your revolver ! |
November 17, 2012, 07:37 AM | #4 |
Senior Member
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
|
A squirt of WD-40. Problem solved.
|
November 17, 2012, 03:41 PM | #5 |
Junior member
Join Date: February 2, 2008
Posts: 3,150
|
Really great idea.
|
November 17, 2012, 04:03 PM | #6 | |
Senior Member
Join Date: May 17, 2012
Posts: 1,085
|
Quote:
TCB
__________________
"I don't believe that the men of the distant past were any wiser than we are today. But it does seem that their science and technology were able to accomplish much grander things." -- Alex Rosewater |
|
November 17, 2012, 07:19 PM | #7 | |
Senior Member
Join Date: November 23, 2008
Posts: 1,091
|
Quote:
|
|
November 17, 2012, 07:43 PM | #8 |
Senior Member
Join Date: September 4, 2011
Location: Vermont
Posts: 1,552
|
WD-40 should be kept far away from guns and ammo, there are far more suitable products for lubrication and corrosion prevention.
|
November 17, 2012, 08:53 PM | #9 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
Years back one of the gun magazines did a test to see which oil would contaminate ammo .That should be out there somewhere.
__________________
And Watson , bring your revolver ! |
November 18, 2012, 02:06 PM | #10 |
Senior Member
Join Date: November 23, 2008
Posts: 1,091
|
Don't know about gun magazines, but I stand corrected;WD40 doesn't harm ammo, at least in the short term. A quick search turned up the link below and several others with similar conclusions:
http://www.theboxotruth.com/docs/bot39.htm |
November 23, 2012, 02:57 PM | #11 |
Junior Member
Join Date: November 17, 2012
Posts: 12
|
WD40 and oils like CLP are penetrating and cleaning oils specially designed to flow into tiny crevices and cracks - like between the bullet and the casing - or it could dissolve the coating between the primer and the casing rendering the primer useless.
Keep your ammo dry! |
Thread Tools | Search this Thread |
|
|