|
|
|||||||
| Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
| Register | FAQ | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Search this Thread |
June 27, 2013, 07:30 PM
|
#1 |
|
Junior Member
Join Date: August 3, 2011
Posts: 8
|
Anyone have a S&W Shield?
I disassembled my 40 Shield and when I put the slide end cap back on, it snapped into place and seems to have locked on the nylon striker housing. There is some vertical play in the slide end plate, however. The play lessons dramatically when on the frame. Is this normal? It appears that the metal end cap sides are fitting in the slide slots correctly.Thank you!
|
|
|
June 27, 2013, 08:45 PM
|
#2 |
|
Member
Join Date: January 15, 2002
Location: Humble, TX
Posts: 16
|
I just looked at mine and I definitely do not see that gap at the top.
|
|
|
|
June 27, 2013, 09:04 PM
|
#3 |
|
Member
Join Date: February 25, 2009
Posts: 68
|
I Agree
Just looked at mine, There is definitely no gap.
|
|
|
|
June 27, 2013, 09:19 PM
|
#4 |
|
Junior Member
Join Date: August 3, 2011
Posts: 8
|
Is there no gap with the slide off? Does it moved if pressed on? Thanks from Houston!
|
|
|
|
June 27, 2013, 09:25 PM
|
#5 |
|
Senior Member
Join Date: May 6, 2012
Location: Southeast Texas
Posts: 1,670
|
Re: Anyone have a S&W Shield?
Make sure you reinstalled everything correctly...
|
|
|
|
June 27, 2013, 09:47 PM
|
#6 |
|
Senior Member
Join Date: December 5, 2009
Location: Frisco Texas
Posts: 844
|
That piece slides in and out when the slide is dissasembled.
Make sure there isnt debris under the piece where it slides in I hope you get it set up.......My shield 40 is my favorite pistol
__________________
An imperfect servant of my Lord and Saviour, Jesus Buying American made, wherever I still can |
|
|
|
June 27, 2013, 10:02 PM
|
#7 |
|
Junior Member
Join Date: August 3, 2011
Posts: 8
|
Thanks Dean1818. At least I know that other people have the slide off movement...
|
|
|
|
June 27, 2013, 10:09 PM
|
#8 |
|
Senior Member
Join Date: February 22, 2013
Posts: 113
|
|
|
|
|
June 27, 2013, 10:16 PM
|
#9 |
|
Junior Member
Join Date: August 3, 2011
Posts: 8
|
Yup its installed right, that is not the problem. There is just about 1-2 mm of movement vertically when it is put together correctly.
|
|
|
|
| Tags |
| m&p , m&p shield , shield |
|
|
