The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old November 3, 2010, 11:43 PM   #1
p5200
Senior Member
 
Join Date: April 1, 2008
Posts: 241
possible good loads to try for CZ 527 Varmint in .204

I realize every individual gun is different but, I thought maybe someone might have some general suggestions on some powders, bullets, and charges that have worked good on this particular rifle for some of you. I'm more interested in accuracy. The powders I have right now are Varget and Benchmark. I have some 35gr. Bergers and Sierra BK. 39gr. bullets All advice is welcome. Thanks!

Last edited by p5200; November 4, 2010 at 12:34 AM.
p5200 is offline  
Old November 4, 2010, 03:47 PM   #2
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
I've used 28.0gr Benchmark to launch 32gr V-Max at just a hair over 4000 fps. It is roughly 1/2 MOA accurate with no tuning. That load is a fair bit less than max in my gun but would likely be over, or very nearly so, with the 35gr Bergers. Hodgdon's suggested start load is 25.0gr for the Berger 35gr with Benchmark. So far, Benchmark has been the most accurate powder I've tried in 3 different cartridges.
__________________
Nobody plans to screw up their lives...
...they just don't plan not to.
-Andy Stanley
Brian Pfleuger is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.04264 seconds with 10 queries