9mm Load Data

[email protected] · May 8, 2006, 03:47 AM

Does anyone know of any good loading data for Glock 19, 9mm for 115 or 124 Hornady xtp, or any other data.

WESHOOT2 · May 8, 2006, 05:28 AM

Brother, I do.

E-mail direct with intent and specifics.

kart racer · May 8, 2006, 04:55 PM

5.8-6.0 of unique with 124 gr and 6.1-6.2 of power pistol w/same.
6.0-6.2 0f unique w/115 gr and 6.2-6.6 of power pistol has worked well in my pistols.The 6.0 of unique is higher than some recommend on the 124 gr,but has shown no pressure problems for me,Stephen Camp also recommends that load on his site-I'd definitely use caution working up to it...on the other hand the power pistol ain't no joke in 9mm.

Bob F. · May 9, 2006, 08:10 AM

kart racer: good accuracy? I used to shoot alot of Unique in .24ACP especially. Tried Universal in 9mm, not impressed.

Bob

kart racer · May 9, 2006, 10:13 AM

http://www.hipowersandhandguns.com/Handloads.htm
heres some of Mr. Camps.I'll see if I have any of my targets saved at the house.Unique has been most consistant accuracy wise,but the power pistol has been right with.The power pistol does have a lot of flash and bang though.

Bob F. · May 9, 2006, 12:14 PM

Yeah, we shoot some night matches w/ just flashlights; some of the guys load Power Pistol. Fun to watch! Not up w/ H110 in .44mag though! LOL

OneInTheChamber · May 9, 2006, 07:55 PM

115 gr. FMJ, 4.8 gr. of Unique, CCI #400 primers in Glock 17. Very accurate, cycles great, little recoil. Feels like shooting a 9mm with the recoil of a .22

Windjammer · May 10, 2006, 10:30 AM

115 gr. FMJ over 4.4 gr of Titegroup in a Glock 17. Makes IDPAs FP no problem.

I have found Titegroup to be a very versatile powder. I use it for Bullseye and IDPA in .38 spl, 9mm and .45 ACP

silicon wolverine · May 10, 2006, 12:53 PM

My particular favorite is 6.3 gr of blue dot with a magnum primer. recoil is a little on the heavy side but its a tackdriving load.

SW

xjz · May 23, 2006, 01:49 PM

I've had good success with 5.0 gr of unique with winchester small primers and 115 gr copper plated bullet, and recently tried reducing the load to reduce recoil for my wife down to 4.3 gr of unique and she has had a lot of problems with FTF and FTE and just the last time I had a couple FTF with that reduced loading for the first time. I don't have it with me but in my Lee loading manual at home, I do have info on the XTP in both 115 and 124 gr bullets. I will try to get it tonight.
- 115 gr XTP using 5.5 to 6.1 gr of v-N340 or 147 gr XTP using 3.9 to 4.2 gr of bullseye, sorry I have no 124 gr info

May 8, 2006, 03:47 AM	#1
[email protected] Member Join Date: March 11, 2006 Posts: 30	9mm Load Data Does anyone know of any good loading data for Glock 19, 9mm for 115 or 124 Hornady xtp, or any other data.

May 8, 2006, 05:28 AM	#2
WESHOOT2 Senior Member Join Date: February 20, 1999 Location: home on the range; Vermont (Caspian country) Posts: 14,324	specifics Brother, I do. E-mail direct with intent and specifics. __________________ . "all my ammo is mostly retired factory ammo"

May 9, 2006, 10:13 AM	#5
kart racer Senior Member Join Date: April 23, 2005 Posts: 175	accuracy http://www.hipowersandhandguns.com/Handloads.htm heres some of Mr. Camps.I'll see if I have any of my targets saved at the house.Unique has been most consistant accuracy wise,but the power pistol has been right with.The power pistol does have a lot of flash and bang though.

May 9, 2006, 07:55 PM	#7
OneInTheChamber Senior Member Join Date: December 12, 2005 Posts: 789	115 gr. FMJ, 4.8 gr. of Unique, CCI #400 primers in Glock 17. Very accurate, cycles great, little recoil. Feels like shooting a 9mm with the recoil of a .22 __________________ Insert witty, comical, and/or significant quote here.

May 10, 2006, 10:30 AM	#8
Windjammer Member Join Date: September 28, 2005 Location: Eastern North Carolina Posts: 83	115 gr. FMJ over 4.4 gr of Titegroup in a Glock 17. Makes IDPAs FP no problem. I have found Titegroup to be a very versatile powder. I use it for Bullseye and IDPA in .38 spl, 9mm and .45 ACP __________________ "I am completely out of ammo... that's never happened to me before." --- Burt Gummer

May 8, 2006, 04:55 PM	#3
kart racer Senior Member Join Date: April 23, 2005 Posts: 175	5.8-6.0 of unique with 124 gr and 6.1-6.2 of power pistol w/same. 6.0-6.2 0f unique w/115 gr and 6.2-6.6 of power pistol has worked well in my pistols.The 6.0 of unique is higher than some recommend on the 124 gr,but has shown no pressure problems for me,Stephen Camp also recommends that load on his site-I'd definitely use caution working up to it...on the other hand the power pistol ain't no joke in 9mm.

May 9, 2006, 08:10 AM	#4
Bob F. Senior Member Join Date: August 20, 2004 Location: Southeastern WV (left out "north") Posts: 195	kart racer: good accuracy? I used to shoot alot of Unique in .24ACP especially. Tried Universal in 9mm, not impressed. Bob

May 9, 2006, 12:14 PM	#6
Bob F. Senior Member Join Date: August 20, 2004 Location: Southeastern WV (left out "north") Posts: 195	Yeah, we shoot some night matches w/ just flashlights; some of the guys load Power Pistol. Fun to watch! Not up w/ H110 in .44mag though! LOL

May 10, 2006, 12:53 PM	#9
silicon wolverine Senior Member Join Date: April 28, 2006 Location: South dakota Posts: 674	My particular favorite is 6.3 gr of blue dot with a magnum primer. recoil is a little on the heavy side but its a tackdriving load. SW

May 23, 2006, 01:49 PM	#10
xjz Member Join Date: October 2, 2005 Location: Peoples Republic of California Posts: 96	I've had good success with 5.0 gr of unique with winchester small primers and 115 gr copper plated bullet, and recently tried reducing the load to reduce recoil for my wife down to 4.3 gr of unique and she has had a lot of problems with FTF and FTE and just the last time I had a couple FTF with that reduced loading for the first time. I don't have it with me but in my Lee loading manual at home, I do have info on the XTP in both 115 and 124 gr bullets. I will try to get it tonight. - 115 gr XTP using 5.5 to 6.1 gr of v-N340 or 147 gr XTP using 3.9 to 4.2 gr of bullseye, sorry I have no 124 gr info Last edited by xjz; May 24, 2006 at 12:35 AM.