|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
November 26, 2012, 11:45 PM | #1 |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
Hello All, I'm new to the forum.
I did not see anywhere specific to post a proper introduction so I'll start here:
My name is Chris, and I don't have much experience with guns. I shot some rifles and a few shotguns when I was younger, but that's about it. In the mid to late 90's, my first and only handgun purchase was a Colt Detective Special, turned out to be one of the last models produced. After having it for several months, I got nervous and foolishly sold it without ever firing it. I was young then, I am different now. After realizing just how bad things are getting out there (or may become), I recently bought a Ruger LCR .38spl+p revolver. I've put about 150 rounds through it so far and am still struggling to be a better shot but I'm not giving up. I also had an LCP for awhile but found it difficult to use and didn't feet confident about it, so I sold it and have saved the money to put towards another snubbie or a shotgun. I think I want to stick with revolvers for now as far as CCW goes. I hope to be able to learn much here as this seems to be a more serious firearms forum. |
November 26, 2012, 11:50 PM | #2 |
Senior Member
Join Date: June 8, 2004
Posts: 289
|
Welcome, Chris. You'll feel at home pretty quickly here. Lots of good folks.
Chuck |
November 27, 2012, 12:16 AM | #3 | |||
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
You:
Quote:
Quote:
Quote:
My first: Things are less than Rosy out there, and having a gun that you are proficient with is a Good Thing. 2nd Opinion; Save your brass. .38 Special is ridiculously expensive as factory ammo, and ridiculously easy to reload. If you have any questions on reloading, I am more than happy to tell you what I know ..... |
|||
November 27, 2012, 12:17 AM | #4 |
Senior Member
Join Date: May 6, 2007
Location: Florida
Posts: 620
|
Hello and welcome. You chose a nice revolver with the Ruger LCR.
|
November 27, 2012, 12:28 AM | #5 | |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
Quote:
Plus, I live in an upper duplex, and I don't really have a work area to do that kind of stuff. |
|
November 27, 2012, 12:36 AM | #6 |
Senior Member
Join Date: February 4, 2007
Location: Oklahoma
Posts: 416
|
welcome
Welcome Chris. This is a good group of people here!!!
|
November 27, 2012, 12:46 AM | #7 | |
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
Quote:
It's NOT rocket science. I know a rocket scientist (Lockheed Martin)..... I can't hack the Math. This is more like a recipe. Simple steps with simple tools. Do this.... Then this..... Ensure this..... This is the Information Age. If a pimply faced YouTuber can show the world how to build an AR15 from scratch, then metallic cartridge reloading should be a cinch! There's people that know more about it than I do on this forum, but I will certainly tell you what I know..... when I started out trying to get into handloading, local handloaders were ..... less than helpful, shall we say.... I vowed never to be "THAT guy". If there is anything I can help you with, let me know. |
|
November 27, 2012, 01:03 AM | #8 | |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
Quote:
Do you have links for that equipment? Can I do it at a my dining room table? |
|
November 27, 2012, 01:42 AM | #9 |
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
Hand Press-
http://www.midwayusa.com/product/665...ock-hand-press Hand priming tool- http://www.midwayusa.com/product/413...d-priming-tool Lee Carbide .38 special 3 die set- http://www.midwayusa.com/product/418...ial-357-magnum Lee Breech lock bushing (not needed if you can find an original style hand press)- http://www.midwayusa.com/product/971...s-package-of-2 Buy plated bullets (fine for .38 special target loads) in lots of 1000+, primers by the 1000, and powder by the pound= cheap shooting. My brother went the hand press route for the first year he had his Ruger sR9c.... loaded and shot several thousand rounds..... like this: Go to range on Saturday, shoot 200 rounds, pick up 250 empty 9mm cases. Sunday, while watching the Rockies/Broncos/Avs, he'd deprime, size and bell his cases on his coffee table. Monday night, watching monday night football, or the Outdoor Channel, he'd use a dipper and get help from his 12 y.o. daughter (in exchange for her getting to go to the range and shooting some of the ammo) to charge the 200-250 cases with Unique, and seat and crimp the bullets.... later in the week, usually on a lunch hour, he'd hit Bass Pro or one of the LGS's and replenish his supplies as needed ..... kept everything in two shoe boxes under his couch, Tools in one, components in the other. He did not save any money, though: He put the money he would have spent on WWB at WallyWorld into more components .... and he bought two rifles .... and dies for both .... and spent 200 bucks on materials/equipment for a reloading bench I built him in his basement (When Armageddon happens, and all of the Denver Metro area is laid waste, the only two things standing will be the Rocky Mountains and that bench!) .... so no, he did not save any money..... but he is a hell of a shot, as is my neice, both with pistol and rifle.... no, he did not save any money..... it is a sickness, and he has it..... yess, he does..... |
November 27, 2012, 01:44 AM | #10 | |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
Quote:
|
|
November 27, 2012, 01:51 AM | #11 |
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
That'd be a new one- most folks think I'm an opinionated curmudgeon .....
|
November 27, 2012, 07:08 AM | #12 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,374
|
The introductions thread is in the General Discussion forum.
I, too, got rid of a Detective Special, which I now regret. Mine was a 1960s model with the factory hammer shroud.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
November 27, 2012, 07:18 AM | #13 |
Senior Member
Join Date: November 15, 2010
Location: United States of America
Posts: 1,877
|
welcome. you seem to have a good taste in firearms.
__________________
"Damn the torpedoes, full speed ahead!" -Admiral Farragut @ Battle of Mobile Bay 05AUG1864 |
November 29, 2012, 07:51 PM | #14 |
Senior Member
Join Date: February 22, 2011
Posts: 582
|
The man has shot 3 boxes of .38 Specials and you want him to start reloading? I would say the best move would be to purchase a LCR-22 and get plenty of cheap practice that will transfer over to his centerfire LCR. The LCR-22 is also a nice plinker and a reasonably nasty defender in itself.
|
November 29, 2012, 07:55 PM | #15 | |
Member
Join Date: November 26, 2012
Location: Wisconsin
Posts: 99
|
Quote:
I planned on getting a LCR-22 or some other .22 revolver just for those purposes. |
|
November 29, 2012, 08:04 PM | #16 |
Senior Member
Join Date: August 30, 2009
Location: Columbus, Ohio
Posts: 475
|
Welcome from THE Buckeye State!....
|
December 2, 2012, 07:52 AM | #17 |
Senior Member
Join Date: April 13, 2008
Location: Sunshine State
Posts: 313
|
Welcome Chris- You are surrounded by a lot of knowledge here, for sure. Opinions, as well. Practice is key for snubbies- been there myself.....
|
December 2, 2012, 11:47 AM | #18 |
Senior Member
Join Date: November 17, 2000
Posts: 20,064
|
Snubbies take a little training and practice to shoot well. Before you just start buying more guns - take the money and find a competent handgun training class. It will do you more good than searching for another gun.
BTW, I kept my Colt. It's a sweetheart. Shot it in match awhile ago. Works just fine. However, back in the safe as its value is increasing.
__________________
NRA, TSRA, IDPA, NTI, Polite Soc. - Aux Armes, Citoyens |
December 2, 2012, 01:43 PM | #19 |
Senior Member
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,969
|
Hello & WELCOME !!
Join in when ya can & hang on when ya need to !!!
GP
__________________
GP100man |
Thread Tools | Search this Thread |
|
|