|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 10, 2010, 08:49 AM | #1 |
Junior Member
Join Date: July 6, 2008
Location: Ventura CA
Posts: 8
|
Replace or modify my Rem 700 .270
I like quality and am willing to pay for it. What do you think about piecing together finer components over time from the barrel to the action, and the stock? Or, what do you recommend for a complete upgrade to the next level?
I like this mountain rifle, but sometimes feel it's too off-the-shelf. @750 rounds through it, stock fairly worn from years of happy hunting. |
August 10, 2010, 11:10 AM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Refinish the wood if you like, or you can replace the stock with a new wood or fiberglass stock. There are some good stockmakers around, or PM me and we can discuss it (I do stockwork for a living). Rebarrel if you like, 750 rounds is still like brand new.
If you just want something different, buy a Surgeon rifle, or a Nosler 48, or a Montana rifle, or whatever, there are lots of custom rifles available.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
August 10, 2010, 11:11 AM | #3 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
Custom rifles usually start with blueprinting the action. It's probably most efficient to do that and change a barrel at the same time, since the old barrel has to come off to work on the action. Stock, trigger, etcetera, can all be done separately, if you like.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
August 10, 2010, 04:34 PM | #4 |
Junior Member
Join Date: July 16, 2010
Location: oklahoma
Posts: 8
|
My suggestion would be to proceed as follows, contact little crow gunworks and request their factory rifle accurizing, before you send it off order any number of pre thread barrels and have a local gunsmith pull the old one and just screw the new one in, no need to worry about headspace or any of that as little crow will take care of that. Just don't try to shoot it before you send it off. Before you send it off, or after it comes back, either or, I'd get ahold of the guys at MPI fiberglass gunstocks for one of their ultralights, it'll shave about 2 pounds off that mountain rifle. Don't worry about the trigger as little crow will work that while its their. When it comes back expect a very dramatic difference in accuracy. Make it a point of lapping your rings and putting good glass on it if you want to take full advantage of what the smith will do.
|
|
|