300 Win. Mag. & Barnes Triple Shock

Wild Bill Bucks · September 23, 2008, 11:04 AM

Bought some new Tipped Triple Shock Barnes 180 grain bullets today, and looking to load them for a 300 Win Mag. Problem is, I don't own a Barnes manuel. Do any of you guys have the new #4 manuel, and if so, would you mind clueing me in on what the loads for R-22 are?
I will be loading them for a Thompson Encore.
Thanks in advance.

Loader9 · September 23, 2008, 01:24 PM

Here ya go:
http://www.barnesbullets.com/images/300WinMagWeb.pdf

FWIW, Barnes has loading data online for the TSX bullets.

Mike1 · September 23, 2008, 10:38 PM

If you haven't loaded the tipped or regular TSXs before, be sure to read the little brochure that comes with the bullets. They're kinda picky on seating depth for best accuracy.

Mike

Wild Bill Bucks · September 24, 2008, 10:00 AM

Thanks a bunch guys, this is just what I needed.

butta9999 · September 25, 2008, 03:38 AM

I load the 180gr Accubond in my .300 win mag with RE-22 rifle is a Winchester model 70 leaner and trimmer.

My load is

76gr of RE-22 and a Federal Mag primer winchester brass. This load is a max load stated in my manual. I have no pressure signs with a verlocity of around 3050fps.

Please be aware this is a load that i have worked up, i recommend you do not copy this load in your rifle. Start 10% less and work up.

September 23, 2008, 11:04 AM	#1
Wild Bill Bucks Senior Member Join Date: December 28, 2005 Location: Southeastern Oklahoma, Next door to Sasquatch Posts: 1,266	300 Win. Mag. & Barnes Triple Shock Bought some new Tipped Triple Shock Barnes 180 grain bullets today, and looking to load them for a 300 Win Mag. Problem is, I don't own a Barnes manuel. Do any of you guys have the new #4 manuel, and if so, would you mind clueing me in on what the loads for R-22 are? I will be loading them for a Thompson Encore. Thanks in advance.

September 25, 2008, 03:38 AM	#5
butta9999 Senior Member Join Date: June 29, 2008 Location: Melbourne, Victoria, Australia Posts: 692	I load the 180gr Accubond in my .300 win mag with RE-22 rifle is a Winchester model 70 leaner and trimmer. My load is 76gr of RE-22 and a Federal Mag primer winchester brass. This load is a max load stated in my manual. I have no pressure signs with a verlocity of around 3050fps. Please be aware this is a load that i have worked up, i recommend you do not copy this load in your rifle. Start 10% less and work up. __________________ Knowledge is Power!

September 23, 2008, 01:24 PM	#2
Loader9 Senior Member Join Date: July 29, 2008 Posts: 949	Here ya go: http://www.barnesbullets.com/images/300WinMagWeb.pdf FWIW, Barnes has loading data online for the TSX bullets.

September 23, 2008, 10:38 PM	#3
Mike1 Senior Member Join Date: September 9, 2008 Location: Colorado Springs, CO Posts: 178	If you haven't loaded the tipped or regular TSXs before, be sure to read the little brochure that comes with the bullets. They're kinda picky on seating depth for best accuracy. Mike

September 24, 2008, 10:00 AM	#4
Wild Bill Bucks Senior Member Join Date: December 28, 2005 Location: Southeastern Oklahoma, Next door to Sasquatch Posts: 1,266	Thanks a bunch guys, this is just what I needed.