The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old March 12, 2013, 09:34 PM   #1
TomL
Senior Member
 
Join Date: June 9, 2009
Posts: 119
.300 Savage re-chamber to .308 Win

Hello all, I wonder is this is a easy upgrade for a Model 99 as in just reaming the chamber for the longer neck/case of the .308 or do we run into magazine length issues and/or chamber pressures? There seems to be a few .308 M99's around but had my eye on a nice 99 in .300 but would prefer the .308 chambering. Thanks. Tom
TomL is offline  
Old March 12, 2013, 10:34 PM   #2
Rainbow Demon
Senior Member
 
Join Date: September 27, 2012
Posts: 397
Not much difference in the case other than neck length.
If OAL in within limits it should work in the spool magazine.

Standard 150 gr hunting loads for the .308 are not high pressure loads. Heavy bullet and long range match loads, along with some 7.62 NATO long range MG or sniper loads may be too hot for the 99.

The savage lever action was at one time available in .308, though this version used a detachable magazine instead of the more common spool type rotary mag.

PS
I'd strongly advise against rebarreling or rechambering a .300 Savage model 99 if it has a good bore and chamber as is. The unaltered rifle is a collectors item these days.

Last edited by Rainbow Demon; March 12, 2013 at 10:39 PM.
Rainbow Demon is offline  
Old March 13, 2013, 01:21 AM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
I wouldn't do it. The rotary magazine 99s are troublesome to switch from 300 Sav to 308. The magazine rotor cutouts are the same shape and size as the cartridges themselves, and some 99s are tighter than others. A 308 Winchester is about 1/8" lonfer than a 300 Savage cartridge, so there may be issues. In addition, the 300 Sav operates at 48,000 psi, the 308 Win operates at 60,000 psi. This is the reason Savage strengthened and lengtheded the Sav 99 receiver design in the mid 1950s when they started offering the rifle in 308.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old March 13, 2013, 02:03 AM   #4
Rainbow Demon
Senior Member
 
Join Date: September 27, 2012
Posts: 397
The .308 maxium chamber pressure is 62 K PSI around 60 K CUP, but operating pressure for the 150 gr loads is around 48,000 CUP - 51,000 PSI.
I would not want to use the long range match ammo or extra heavy big game loads in a Model 99 but standard velocity 150 gr Deer loads should not be a problem.
Rainbow Demon is offline  
Old March 13, 2013, 02:54 AM   #5
natman
Senior Member
 
Join Date: June 24, 2008
Posts: 2,604
Not a good idea as you will run into both length and pressure issues. Besides a nice 99 is a collector's item now and will be more so in the future. Keep it original.

If you want a 99 in 308, buy one that came that way from the factory.
natman is offline  
Old March 13, 2013, 10:35 AM   #6
TomL
Senior Member
 
Join Date: June 9, 2009
Posts: 119
.300 Savage re-chamber

Thanks for the replys. I kind of figure there was a good reason(s) but had to ask. I didn't know about the .308 box magazine(99F?)and the 99 in that chambering are quite generic/homely in appearance as compared to the 99 in .300. Not too appealing for my likes. It's not a collector piece I want, there are plenty of them still for sale, some ridiculously high priced of course. It will be a hog and deer killer to be precise and since the .308 round is more attainable than the .300 from what I read, that was my thinking regarding the re-chamber.

I do not have at hand my Hornady reloaders guides so cannot read and compare ballistics and bullet types so would one of you post some comparisons using 130-150 grain data of both .300 and .308. Thanks again. Tom L
TomL is offline  
Old March 13, 2013, 10:51 AM   #7
Bart B.
Senior Member
 
Join Date: February 15, 2009
Posts: 8,927
Rainbow Demon, your info on .308 pressure's not all correct. Please refer to the following starting on page 13 for CUP and PSI data for the .308 Win as well as the .300 Savage paying close attention to the pressures for all bullet weights:

http://www.saami.org/specifications_...wnload/206.pdf

And regarding the Savage owner's objectives of wanting it chambered to .308 obviously outweighs his desire to have it be a collector item.

Last edited by Bart B.; March 13, 2013 at 10:57 AM.
Bart B. is offline  
Old March 13, 2013, 01:36 PM   #8
Hunter Customs
Senior Member
 
Join Date: March 26, 2005
Location: Osborn, Missouri
Posts: 2,697
I've killed a lot of deer with a Savage 99 in 300 Savage caliber, I would think it would work equally well on hogs.
The 308 does have better ballistics and the ammo will most likely be less expensive, however if you use the 300 Savage I believe you will be pleased with it's performance.
In my opinion the handling ability of these old rifles is superb.

Best Regards
Bob Hunter
www.huntercustoms.com
Hunter Customs is offline  
Old March 13, 2013, 10:20 PM   #9
BumbleBug
Senior Member
 
Join Date: March 11, 2013
Location: Near Heart of Texas
Posts: 870
Get some experience with the .300 Savage before you move to the .308

I have family members that have killed uncountable number of deer & other game with the .300 Savage in the 99. It is an excellent cartridge/gun combination & there is very little if anything to gain converting it to a .308. If you'll try it on deer & hogs I'm sure you'll realize that rather quickly. Use the money you save not converting to start reloading. Then your .300 will be suitable for everything up to caribou with the right load.

Looking in several loading books for 150gr bullets (best bet for deer & hogs):
.308 Win max velocity is 2700 to 2900 fps
.300 Savage max velocity is 2500 to 2700 fps

Good Luck!

...bug
BumbleBug is offline  
Old March 14, 2013, 12:16 PM   #10
Pathfinder45
Senior Member
 
Join Date: January 7, 2008
Posts: 3,224
+ 1

The cost of conversion would be better spent on ammo and/or reloading. If you only shoot it a little bit for hunting and to check your sights, 100 rounds would be plenty, I suppose. But for a caliber that's not as common as it once was, perhaps having a reserve of 500 rounds with the ability to reload would guarantee a lifetime supply even if you shoot it quite a lot.
Pathfinder45 is offline  
Old March 14, 2013, 01:32 PM   #11
TomL
Senior Member
 
Join Date: June 9, 2009
Posts: 119
.300 Savage re-chamber

Hello, all posts make good points. I was a serious reloader many moons ago, still have all my equipment but just stopped due to life and its trappings. Maybe its time to pull the stuff out and take up the hobby again. I did some searches and the 150 gr psp .300 Savage is selling between 37-40 dollars a box of 20. 120 rounds might well last me years of hunting including a 3 round group to check sighting. To my thinking its doubtful I could get a re chamber done for the ammo cost and take into consideration the effect of what that would make the rifle into instead of what it was! Thanks all. TomL
TomL is offline  
Old March 16, 2013, 12:26 PM   #12
tahoe2
Senior Member
 
Join Date: August 13, 2011
Location: Seattle area
Posts: 661
Hey all, don't underestimate the killing power of that 300 Savage, my 1951 Model 99 has taken several Elk in Utah as well as countless Whitetails.
Not by my hand, but the previous owners, he used 150 grainers for deer and 180 grainers for Elk. Keep the shots reasonable and it will do it's job, and do it well.
A Model 99 can be had in 308, just have to look long & hard with lots of patience. Been reloading the 300 for years and got the best results with BLC-2 and Sierra
150 grn round nose bullets (1-7/8"@100) and H-335 with 165 grn Speer Grand Slam's (1-3/8"@100), don't know the velocity, but out to 250 yards or so this one is deadly!

Last edited by tahoe2; March 16, 2013 at 12:33 PM.
tahoe2 is offline  
Old March 16, 2013, 06:10 PM   #13
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 3,364
Not worth the effort and money involved. If you see a .308 and it seems expensive, wait until you pay someone to change over a .300 Savage.
Gunplummer is offline  
Old March 16, 2013, 06:52 PM   #14
mete
Senior Member
 
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
When Savage added 243, 308 ,and [7/08 ??] to the 99 they also changed the steel type/HT. they did that for a reason!!
Rechamber is not recommended !
__________________
And Watson , bring your revolver !
mete is offline  
Old March 16, 2013, 08:46 PM   #15
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 3,364
I have been hearing that for years. What type of steel was being used opposed to what they went to later? Sounds like a rumor to me. Nobody ever knows what kind of steel is actually used. I have worked on quite a few 99's and the later models actually have more steel milled out of them. Facts if you have them. I am interested. I have a piece of a receiver some one was kind enough to donate to me, and I will eventually do some testing on it when I get time. I would not be afraid to barrel a 99 to .308 that was made in the early 40's.
Gunplummer is offline  
Old March 17, 2013, 12:50 PM   #16
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,678
I've used both, and can readily testify that no deer, shot with either the .308 or the .300Savage, ever knew the difference.

BTW - IIRC, the detachable-magazine version of the .308 chambered M99 was the 99-C.



.
PetahW is offline  
Old March 17, 2013, 08:47 PM   #17
mete
Senior Member
 
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
I don't remember the source of the info.
There are many things that are changed that the consumer knows nothing about.They may be changed for any number of reasons.A few shots fired safely isn't the only test. Long term use may show up other problems.
__________________
And Watson , bring your revolver !
mete is offline  
Old March 22, 2013, 07:44 PM   #18
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 3,364
Seems like nobody ever remembers. Rumor.
Gunplummer is offline  
Old March 23, 2013, 12:52 AM   #19
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678


This is a 1917 Sav 99 250 Sav take down that I drilled and tapped for scope.
I threaded and chambered a 6mmPPC shilen stainless select match take $50 take off barrel for SAV99 and 6mmBR.

I have been shooting it at ~ 80,000 psi with the same case head as the 308, but the 308 case head cannot go that high. The primer would fall out. The 6mmBR limit is a pierced primer. I use the toughest primer, the CCI 450 small rifle magnum primer. I run it just below the threshold of a pierced primer.

The brass stretches ~ .003".
The action locks up in the rear.
Different steel with different heat treat of alloy may have different yield strength, but they will all have the same modulus of elasticity. That means it does not matter what vintage Sav99, they will all stretch the brass the same amount.
__________________
The word 'forum" does not mean "not criticizing books."
"Ad hominem fallacy" is not the same as point by point criticism of books. If you bought the book, and believe it all, it may FEEL like an ad hominem attack, but you might strive to accept other points of view may exist.
Are we a nation of competing ideas, or a nation of forced conformity of thought?
Clark is offline  
Old March 23, 2013, 05:25 AM   #20
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 3,881
I have a Savage 99 that was my Grand Fathers, my Fathers, now mine and will some day be my sons. I wouldn't change a thing on it, it is all original. It has taken deer and black bear. It is a family heirloom and very valued possession.
rebs is offline  
Old March 23, 2013, 05:35 PM   #21
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 3,364
I do agree with Clark, but I still also believe that the steel and heat treatment there of remained relatively the same. I have never seen in print (Reliable source) what type of steel was used in the receivers. It is possible that when Savage switched to a magazine on the model '99 that the the steel was changed. I never really got involved to any depth with the "C" model. That would make sense as far as reinforcing the area where steel was removed.
Gunplummer is offline  
Old March 24, 2013, 02:26 AM   #22
mete
Senior Member
 
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
So type and HT of the steel doesn't make a difference ?? About 80 years ago they introduced the high velocity 22RF.Colt pistols were marked to indicate pistols designed for the higher pressure load.
Using the older guns with newer ammo wouild reduce the life of the gun. Even a modern pistol using lower pressure standard velocity will last longer than if using the high velocity.
In the 70s there were obvious differences in the "quality " of pistols. My Browning Challenger wouild outlive a High Standard. Don't know the specifics but steel type and HT was obviously the thing that made the difference. BTDT, I am a metallurgist after all !
__________________
And Watson , bring your revolver !
mete is offline  
Old March 24, 2013, 03:17 AM   #23
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 3,364
So, somehow a colt pistol now has something to do with a 99' Savage? I have really heard some wild rumors about guns and ammo over the years, especially from customers. Most of the time it is impossible to track down where rumors start. If I could not find any solid information on something, I usually just blew it off. I think I will start a thread and see how many ridicules rumors are out there.
Gunplummer is offline  
Old March 24, 2013, 10:01 PM   #24
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 4,678
I keep buying old Colt handguns, three more yesterday.

The Colt Woodsman and pre woodsman semi auto have recoil springs for standard velocity.

Newer hotter 22 ammo will hammer them.
__________________
The word 'forum" does not mean "not criticizing books."
"Ad hominem fallacy" is not the same as point by point criticism of books. If you bought the book, and believe it all, it may FEEL like an ad hominem attack, but you might strive to accept other points of view may exist.
Are we a nation of competing ideas, or a nation of forced conformity of thought?
Clark is offline  
Old March 24, 2013, 10:25 PM   #25
JohnKSa
Staff
 
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,929
Quote:
That means it does not matter what vintage Sav99, they will all stretch the brass the same amount.
Unless the action starts to yield.
__________________
Do you know about the TEXAS State Rifle Association?
JohnKSa is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.10681 seconds with 10 queries