August 12, 2005, 06:06 PM | #1 |
Member
Join Date: June 27, 2005
Location: In the Twilight zone.
Posts: 55
|
Ignorant Question
They have 12 gauges in semi-auto, pump, single-shot, and double-barrel form.
Double-barrels don't have as many moving parts as the semi-auto (do they?). Why do they tend to cost at least double? Double-barrels seem cost a minimum of a thousand... why them and not any of the other designs? |
August 12, 2005, 06:22 PM | #2 |
Senior Member
Join Date: June 24, 2004
Location: Western Washington
Posts: 397
|
Sounds like you're looking at some mildly fancy over/unders. If you go most of the way to the cheap end of the spectrum, a side by side can get down around $250 IIRC. It all depends on the grade/intended useage.
|
August 12, 2005, 06:31 PM | #3 |
Junior member
Join Date: April 18, 2005
Posts: 517
|
Any double is actually 2 guns in one stock.......so you have twice the lock work.
|
August 12, 2005, 10:57 PM | #4 |
Senior Member
Join Date: July 9, 2001
Location: Denison Texas on the banks of Texhoma
Posts: 1,556
|
One big hump to get over is getting those 2 barrels to shoot at the same place, not as easy as just straping two tubes together. And then there's the fact that SXS's are just WAY COOLER.
__________________
John A. Monroe, Never Forgive, Never Forget, Blood Pays Blood |
August 13, 2005, 06:00 PM | #5 |
Senior Member
Join Date: November 7, 2004
Location: Living the dream in Christchurch, NEW ZEALAND
Posts: 1,635
|
Yes, its redulating the two barrels that is the problem, and adds to the cost. El cheapo sbs will shoot to two different points of impact, which doesnt help in hitting fleeing quail.
__________________
"Beware of the Man with one gun...he probably isnt into guns enough to be safe with it". |
|
|