The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools Search this Thread
Old September 21, 2014, 12:54 PM   #1
Tomac
Senior Member
 
Join Date: December 15, 2001
Location: Caldwell, Idaho
Posts: 511
First Impressions: Meprolight's New RDS

First off, I just had hand surgery for a damaged tendon so pics/range report will have to wait (sorry). As it is I'm having to type this one-handed so apologies for any brevity on my part.
Disclaimer: I have no affiliation w/Mako or Meprolight except as a retail customer.
Pics/basic info here: http://www.idfholsters.com/Detail.aspx?PROD=1077210

Appearance: At first glance this looks similar to an Eotech, what with the blockish design & HUD.

Observations:
Optic feels solid in the hand and weighs 11.4oz w/the included alkaline AA battery installed. FOV through the optic has the same wide-open feeling as the Eotech's HUD. If there's any lens tint, I can't see it.
Battery compartment is nicely threaded and has a rubber gasket to keep out moisture. A battery orientation graphic is on the side of the compartment and the cap is tethered to the body of the optic.
Switch has both audible and tactile feedback and I like how few settings there are (off, high, medium, low & NV, do we really need 20 different brightness settings on a combat optic?). Location is easy to access/use w/the support hand. On high in the bright Idaho sun, I could get dot to wash out only when aiming at the white trim of my house 6' away w/direct sunlight coming over my shoulder. I'll post about lowlight use w/a taclight when physically able.
Due to my astigmatism the dot is somewhat distorted but still sharper than other reticles I have used, still very usable for me (YMMV).
The QD mount appears non-obtrusive and easy to adjust, better than the Meprolight M21's QD mount, IMHO. It provides an appx 1/3 cowitness so if you want absolute I'm afraid you're out of luck.
There is a front-side signature, but it's not head-on. It's only visible when looking down at the optic from an angle. ie: If you're aiming at someone, they'll see no front-side signature. However, if someone is standing directly behind and far enough above your target, it's possible they could detect the dot. It's also theoretically possible to get reflection off the angled front of the prism but that takes an ideal lighting situation (in other words, I'm not worried about front-side signature or reflections).
Unlike the Eotech, the HUD of the Meprolight RDS is a solid prism so whether the hood is aluminum (as on the first 400 RDS') or polymer should have little effect on the ruggedness of the optic.
W/E adjustments are .5moa (better then the latest M21's 1moa and much better then the original M21's 1.7moa) w/definite clicks and are easily adjusted w/a small coin like a nickel.
I'm currently testing the motion sensor, more on that later.

Bottom line: Until I can get in some range time (hopefully in several days), I have to say I'm impressed w/the features offered for the price. The only possible downside I can think of at this time is if you just can't live w/o an absolute cowitness.
Tomac

ETA: After several tests it appears the auto-shutoff is set for 30 minutes (accurate enough that I even watched it turn off once). If I'm *very* slow & careful I can tilt the unit back and forth w/o reactivating the dot. However, even the slightest tap on the optic will reactivate the dot.
__________________
"His Universe, His rules." - Tomac

Last edited by Tomac; September 21, 2014 at 03:34 PM.
Tomac is offline  
Old September 22, 2014, 09:20 AM   #2
Tomac
Senior Member
 
Join Date: December 15, 2001
Location: Caldwell, Idaho
Posts: 511
Update: Got them mounted & cowitnessed w/my BUIS (which should make sighting-in easier when I can finally hit the range), QD mounts adjusted easily and clamped-down solidly, no worries there. Did a lowlight test in my darkened garage using the 500 lumen Inforce WMLx on my rifles. I was very surprised that the dot was still visible at the low setting even when aiming at a white wall 6' away. The dot was very visible on the medium setting, I believe that will be my default setting in the future. This optic is looking better and better.
Tomac


__________________
"His Universe, His rules." - Tomac
Tomac is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03092 seconds with 8 queries