Hard Times, Let's see a free item/pass it forward thread - Page 2

pnolans · February 2, 2013, 08:35 AM

I've got about 50 rounds of .38 special ammo. Sold the gun this summer. will donate the ammo. Can I legally ship this? If not, I live in Co Springs, CO.

Pat

Will find more stuff for the bro's... Will post more later.

The .38 special has been claimed!

guns54 · February 2, 2013, 01:08 PM

Hi. JMP The 10-22 parts came about 15 mins ago thank you very much. Have a safe day.guns54

tobnpr · February 3, 2013, 01:25 PM

Quote:

Can I legally ship this?

Loaded ammo ships UPS or Fedex Ground only. Hazardous, mark it as such
"ORM-D"...

PhantomPhyxer · February 3, 2013, 06:39 PM

I could use a holster for a ruger SR9/SR9c if one is close. I'm relatively new to shooting after a lllll ooooo nnnnn ggggg time.

sirdiealot · February 5, 2013, 08:46 PM

got a hard case for a remington 870.

coachteet · February 6, 2013, 02:42 PM

Grips arrived last week. Thanks again spacecoast!!

The Uncle Mike's holster is going out today, been a bit hectic sirdiealot--sorry for the delay.

sirdiealot · February 6, 2013, 03:38 PM

no prob coach i wont post negative review on your service lol

MRL21 · February 6, 2013, 09:22 PM

I have a Sig P239, 357 Sig magazine I will send whoever sends the first PM with mailing information.

saands · February 7, 2013, 08:59 PM

PM sent on the 7mm bullets ... I will dig around ... I just KNOW that I have a bunch of stuff.

Saands

saands · February 7, 2013, 10:24 PM

OK ... I have some miscellaneous AR lower parts ... 2 mil-spec triggers, 2 hammers, should be 2 sets of trigger springs. Any one need them?

Saands

big_bad_kitty · February 8, 2013, 06:40 AM

I could sure use them. I have been trying to acquire soem of the lower parts and have not been successful! This weekend I will dig into my gun safe and find several things I know are excess and I have no plans to use!! Thanks guys! (and gals!)

mukwah · February 8, 2013, 07:20 AM

Found a beautiful 70's vintage Wingmaster 870 stock I'm refinishing for my grandsons 870 Express so I'll soon have an 870 Express wood stock and fore end if anyone is interested.

big_bad_kitty · February 11, 2013, 10:21 PM

OK! I dug through the safe over the weekend and found a couple of things. One at a time and the first up is a set of RCBS Dies. RCBS Part #15201 - 2die set for 300 WBY MAG. Uses shell holder #4 but I do not have the shell holder for the dies. First one to post in the thread that they will take it based on time stamp gets the RCBS Dies. I think they will fit in a small flat rate box but for sure they will fit in a priority envelope. I think postage on them will run $5.90 so please be willing to pay the postage on them. They look as if they have never been used at all!

FlyFish · February 12, 2013, 05:37 PM

First, a big thanks to Mike for the Sig magazine.

I have two sets of grips that will fit S&W K/L frame revolvers. These came with a 686 that I bought a while back, and I think they were both rather expensive originally, particularly the ones with the dragon inlay and butt plate. Both are just wood on the other side, i.e., no medallion or inlay.

Please shoot me a PM with shipping info if you'd like either pair - I'd like them to go to two different people, so specify which one you'd like. I'll have them out to you ASAP.

Feb 13, 8 AM: Both sets of grips are now spoken for. I'm going to be digging through the stash and will likely find a couple more sets to post later today.

OEF-Vet · February 12, 2013, 06:16 PM

Wow flyfish those are some darn nice grips. I'm sure someone will be glad to put them on their S&W.

Sent from my HTC PH39100 using Xparent Green Tapatalk 2

mukwah · February 12, 2013, 06:48 PM

Sure wish I had a Smith!

coachteet · February 12, 2013, 11:38 PM

I would like to claim the dragon (on the left) Smith and Wesson grips if they aren't spoken for, Flyfish. I will head back down to the dungeon and dig up some more goodies. Let's keep this thread going! PM sent.

FlyFish · February 13, 2013, 07:01 AM

Dragon grips are on their way to coachteet, the other pair is still available.

Feb 13, 8 AM: Both pair now spoken for.

FlyFish · February 13, 2013, 12:52 PM

Been out to the barn again . . .

I've got two more pairs of revolver grips. The first is a set of standard Pachmayr "Grippers" that will fit a square butt N-frame S&W revolver. The second are oversized grips for an S&W J-frame, square or round butt - you can see from the photo that they will work on either (my Model 34 is not included!). First PM on each takes them and I'll cover the postage.

While I was out there looking for grips, it occurred to me that with the current shortages of reloading components there may be some of you who aren't reloading/shooting because you can't get enough brass, and after decades of brass scrounging I've got more than I can shoot in 10 lifetimes, so . . . I've got three bags of 9mm, .40 S&W, and .45 ACP brass. About a hundred pieces in each - should be a few more, as I counted quickly and then threw in an extra handful. These are mixed headstamp, brass or nickel, range brass that have been tumbled clean by me but otherwise not inspected. They're the same brass that I would (and do) reload without hesitation after the normal inspection for neck splits and the like.

As with the grips, first PM on each caliber takes them (if you want to send a single PM listing order of preference, that's OK) and I've got the postage covered. In the interest of spreading the love, one caliber to a customer, and please don't ask for them if, like me, you've already got all you need.

Gotta be a few more old farts like me out there with stuff they need to unload. C'mon guys, look around and see what you're not using that someone else would like - this is fun.

Forgot to add: Be sure to include your name and shipping address in your PM.

UPDATES: 9mm and .45 brass and J-frame grips spoken for.

TheNatureBoy · February 13, 2013, 05:28 PM

I have a 7mm rem mag competition bullet seater that I purchased but never used. I don't have the extended shell holder. Free to a good home

pnolans · February 13, 2013, 07:25 PM

Quote:

I have a 7mm rem mag competition bullet seater that I purchased but never used. I don't have the extended shell holder. Free to a good home

@NatureBoy:

I'd love to have this.

Send me a PM if you still have it.

Thanks,

sirdiealot · February 13, 2013, 08:31 PM

if my 40s&w dies werent on backorder would love the brass. but im about 2months out before i get them so im sure someone can get use of them before then....wish i would have been on earlier would have loved the 45acp though lol.....this is a great thread and love seeing the generosity of the folks here....guess im gonna have to dig a little deeper as no one wants the case that i have left. when i get home this weekend will do a little more digging and see if i have somehting else to offer up

TheNatureBoy · February 14, 2013, 04:56 PM

pnolan, check your pm

brmfan · February 14, 2013, 06:48 PM

Like the title says, I have a new 5rd M1A mag (9.14 brand from Brownells) and 58 once fired 300 Win Mag cases (Norma) for anyone who wants them.

OEF-Vet · February 15, 2013, 06:57 PM

FlyFish

I got my brass today. Thank you very much Sir components are getting mighty scarce these days.

February 2, 2013, 08:35 AM	#26
pnolans Member Join Date: December 7, 2011 Location: Colorado Springs, CO Posts: 95	I've got about 50 rounds of .38 special ammo. Sold the gun this summer. will donate the ammo. Can I legally ship this? If not, I live in Co Springs, CO. Pat Will find more stuff for the bro's... Will post more later. The .38 special has been claimed! __________________ ”You cannot invade the mainland United States. There would be a rifle behind each blade of grass.” ~Admiral Isoroku Yamamoto "DUMP HICKENLOOPER".. my soon to come bumper sticker. Last edited by pnolans; February 2, 2013 at 12:14 PM.

February 2, 2013, 01:08 PM	#27
guns54 Member Join Date: August 20, 2007 Location: ohio Posts: 27	Hi. JMP The 10-22 parts came about 15 mins ago thank you very much. Have a safe day.guns54 __________________ there is only one success-to be able to speed your life in your own way.

February 3, 2013, 06:39 PM	#29
PhantomPhyxer Junior Member Join Date: January 11, 2013 Location: Enid, Oklahoma Posts: 3	guns54 I could use a holster for a ruger SR9/SR9c if one is close. I'm relatively new to shooting after a lllll ooooo nnnnn ggggg time.

February 6, 2013, 03:38 PM	#32
sirdiealot Senior Member Join Date: September 25, 2012 Location: kansas Posts: 187	no prob coach i wont post negative review on your service lol __________________ 9mm Luger: ...Wildly popular all over the world, mostly in countries where people don’t carry guns, and cops don’t have to actually shoot people with theirs.

February 8, 2013, 06:40 AM	#36
big_bad_kitty Member Join Date: April 22, 2010 Posts: 73	I could sure use them. I have been trying to acquire soem of the lower parts and have not been successful! This weekend I will dig into my gun safe and find several things I know are excess and I have no plans to use!! Thanks guys! (and gals!) __________________ NRA Endowment Life Member - TX Concealed Handgun Instructor Experience - What you get when you don't get what you wanted! texasconcealedhandguninstructor.com

February 6, 2013, 02:42 PM	#31
coachteet Senior Member Join Date: March 7, 2008 Location: Cincinnati, OH Posts: 122	Grips arrived last week. Thanks again spacecoast!! The Uncle Mike's holster is going out today, been a bit hectic sirdiealot--sorry for the delay.

February 6, 2013, 09:22 PM	#33
MRL21 Member Join Date: December 15, 2005 Location: AZ Posts: 60	I have a Sig P239, 357 Sig magazine I will send whoever sends the first PM with mailing information.

February 7, 2013, 08:59 PM	#34
saands Senior Member Join Date: November 14, 1999 Posts: 1,573	PM sent on the 7mm bullets ... I will dig around ... I just KNOW that I have a bunch of stuff. Saands

February 7, 2013, 10:24 PM	#35
saands Senior Member Join Date: November 14, 1999 Posts: 1,573	OK ... I have some miscellaneous AR lower parts ... 2 mil-spec triggers, 2 hammers, should be 2 sets of trigger springs. Any one need them? Saands

February 8, 2013, 07:20 AM	#37
mukwah Member Join Date: August 30, 2012 Posts: 92	Found a beautiful 70's vintage Wingmaster 870 stock I'm refinishing for my grandsons 870 Express so I'll soon have an 870 Express wood stock and fore end if anyone is interested.

February 11, 2013, 10:21 PM	#38
big_bad_kitty Member Join Date: April 22, 2010 Posts: 73	OK! I dug through the safe over the weekend and found a couple of things. One at a time and the first up is a set of RCBS Dies. RCBS Part #15201 - 2die set for 300 WBY MAG. Uses shell holder #4 but I do not have the shell holder for the dies. First one to post in the thread that they will take it based on time stamp gets the RCBS Dies. I think they will fit in a small flat rate box but for sure they will fit in a priority envelope. I think postage on them will run $5.90 so please be willing to pay the postage on them. They look as if they have never been used at all! __________________ NRA Endowment Life Member - TX Concealed Handgun Instructor Experience - What you get when you don't get what you wanted! texasconcealedhandguninstructor.com

February 12, 2013, 06:16 PM	#40
OEF-Vet Senior Member Join Date: October 23, 2011 Location: Backwoods, PA Posts: 284	Wow flyfish those are some darn nice grips. I'm sure someone will be glad to put them on their S&W. Sent from my HTC PH39100 using Xparent Green Tapatalk 2

February 12, 2013, 06:48 PM	#41
mukwah Member Join Date: August 30, 2012 Posts: 92	Sure wish I had a Smith!

February 12, 2013, 11:38 PM	#42
coachteet Senior Member Join Date: March 7, 2008 Location: Cincinnati, OH Posts: 122	I would like to claim the dragon (on the left) Smith and Wesson grips if they aren't spoken for, Flyfish. I will head back down to the dungeon and dig up some more goodies. Let's keep this thread going! PM sent.

February 13, 2013, 07:01 AM	#43
FlyFish Senior Member Join Date: January 20, 2009 Location: Overlooking the Baker River Valley Posts: 1,723	Dragon grips are on their way to coachteet, the other pair is still available. Feb 13, 8 AM: Both pair now spoken for. __________________ NRA Benefactor Life Member NRA Certified Instructor: Rifle, Pistol, Shotgun, PPIH, Metallic & Shotgun Shell Reloading; RSO Pemigewasset Valley Fish & Game Club Last edited by FlyFish; February 13, 2013 at 08:10 AM.

February 13, 2013, 12:52 PM	#44
FlyFish Senior Member Join Date: January 20, 2009 Location: Overlooking the Baker River Valley Posts: 1,723	Been out to the barn again . . . I've got two more pairs of revolver grips. The first is a set of standard Pachmayr "Grippers" that will fit a square butt N-frame S&W revolver. The second are oversized grips for an S&W J-frame, square or round butt - you can see from the photo that they will work on either (my Model 34 is not included!). First PM on each takes them and I'll cover the postage. While I was out there looking for grips, it occurred to me that with the current shortages of reloading components there may be some of you who aren't reloading/shooting because you can't get enough brass, and after decades of brass scrounging I've got more than I can shoot in 10 lifetimes, so . . . I've got three bags of 9mm, .40 S&W, and .45 ACP brass. About a hundred pieces in each - should be a few more, as I counted quickly and then threw in an extra handful. These are mixed headstamp, brass or nickel, range brass that have been tumbled clean by me but otherwise not inspected. They're the same brass that I would (and do) reload without hesitation after the normal inspection for neck splits and the like. As with the grips, first PM on each caliber takes them (if you want to send a single PM listing order of preference, that's OK) and I've got the postage covered. In the interest of spreading the love, one caliber to a customer, and please don't ask for them if, like me, you've already got all you need. Gotta be a few more old farts like me out there with stuff they need to unload. C'mon guys, look around and see what you're not using that someone else would like - this is fun. Forgot to add: Be sure to include your name and shipping address in your PM. UPDATES: 9mm and .45 brass and J-frame grips spoken for. __________________ NRA Benefactor Life Member NRA Certified Instructor: Rifle, Pistol, Shotgun, PPIH, Metallic & Shotgun Shell Reloading; RSO Pemigewasset Valley Fish & Game Club Last edited by FlyFish; February 15, 2013 at 07:11 AM.

February 13, 2013, 05:28 PM	#45
TheNatureBoy Senior Member Join Date: September 6, 2007 Posts: 1,204	I have a 7mm rem mag competition bullet seater that I purchased but never used. I don't have the extended shell holder. Free to a good home

February 13, 2013, 08:31 PM	#47
sirdiealot Senior Member Join Date: September 25, 2012 Location: kansas Posts: 187	if my 40s&w dies werent on backorder would love the brass. but im about 2months out before i get them so im sure someone can get use of them before then....wish i would have been on earlier would have loved the 45acp though lol.....this is a great thread and love seeing the generosity of the folks here....guess im gonna have to dig a little deeper as no one wants the case that i have left. when i get home this weekend will do a little more digging and see if i have somehting else to offer up __________________ 9mm Luger: ...Wildly popular all over the world, mostly in countries where people don’t carry guns, and cops don’t have to actually shoot people with theirs.

February 14, 2013, 04:56 PM	#48
TheNatureBoy Senior Member Join Date: September 6, 2007 Posts: 1,204	pnolan, check your pm

February 14, 2013, 06:48 PM	#49
brmfan Senior Member Join Date: October 21, 2008 Posts: 557	M1A 5rd mag & Norma 300 WM brass Like the title says, I have a new 5rd M1A mag (9.14 brand from Brownells) and 58 once fired 300 Win Mag cases (Norma) for anyone who wants them.

February 15, 2013, 06:57 PM	#50
OEF-Vet Senior Member Join Date: October 23, 2011 Location: Backwoods, PA Posts: 284	FlyFish I got my brass today. Thank you very much Sir components are getting mighty scarce these days. __________________ Jim "If a man does his best, what else is there?" - General George S. Patton Jr