I have some .270 Win Woodleigh 150 gr Weldcore PP SN. The Woodleigh website has no reloading data. All it says is the following:
Quote:
As a general rule Woodleigh RN and PP bullets generate similar pressures to conventionally constructed soft nose bullets. You can use published data from other bullet and powder manufacturers. For safety, reduce by 5% and work up.
|
The BC is .463 and the closest thing I found was in the Hornady Manual #7. They have loads listed for a 150 gr SP with a BC of .462. The #1 powder they recommend is H4350 using anywhere from 46.6 gr to 52.3 gr. I am using CCI benchrest large rifle primers and Federal once fired brass. Has anyone loaded the 150 gr Woodleigh in .270 Win? Any loads you can recommend?