November 7, 2007, 12:52 PM | #1 |
Member
Join Date: February 13, 2007
Posts: 90
|
Trigger job cost?
I have a '68 Browning BAR 30-06, just started shooting it again and having fun. Never realized how crappy the trigger is! I feel I can shrink my groups in half by changing the trigger. Probably averaged 1.5" groups today using a 2.5-6 power scope at 100yds.
Before I start calling around, I was hoping to get a ball park idea of how much to expect. Thanks |
November 7, 2007, 01:57 PM | #2 |
Senior Member
Join Date: July 24, 2007
Location: Indianapolis, IN
Posts: 467
|
I've never had a trigger job done. I've polished and cleaned them up myself, but the only money I would spend on a trigger would be the $100 or so a good Timney costs. I think its better to just replace with a high quality trigger, but thats just my preference.
|
November 7, 2007, 02:00 PM | #3 |
Senior Member
Join Date: May 25, 2007
Location: South Florida
Posts: 924
|
Condidering the cost of a high quality replacement trigger available from many sources, against the quality level of a "trigger job" done by local "gunsmiths" and the down side of trigger jobs being ADs etc. My opininon is to spend the $ to get a replacement.
Roger |
November 7, 2007, 02:10 PM | #4 |
Senior Member
Join Date: February 27, 2006
Location: Lane County Oregon
Posts: 2,547
|
Trey - I will lurk your thread as I am interested as well. Not a job done by a "gunsmith", but by a gunsmith.
__________________
U.S Army, Retired Ethics is knowing the difference between what you have a right to do and what is right to do. -Potter Stewart |
November 7, 2007, 02:11 PM | #5 |
Junior member
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,172
|
There are no drop ins for BARs and a trigger job on them is a PITAS.
WildcomparedtoothersAlaska ™ |
November 7, 2007, 02:55 PM | #6 |
Senior Member
Join Date: November 27, 2006
Location: Central Kentucky
Posts: 110
|
Don't know if this will help or not, but I had just had a trigger job done on my Ruger M77 .30-06 and it is amazing the difference. It cost me $35 and it was the best $35 I have ever spent.
I know you're talking about a '68 Browning BAR, just my .02 worth...
__________________
It's all fun and games until a piece of hot brass goes down your shirt... Imagine if every outdoorsman taught the sport to 2 young people -----> What are you doing to save our sport? |
November 7, 2007, 03:30 PM | #7 |
Member
Join Date: February 13, 2007
Posts: 90
|
Thanks for the responses, I had thought about a replacement, but didn't think there was one for this old gun. I am always up for do it yourself projects also, just didn't want to screw anything up right now.
|
November 7, 2007, 04:50 PM | #8 | |
Senior Member
Join Date: December 7, 2005
Location: Pittsburgh Pa.
Posts: 195
|
Quote:
I just had the same Ruger 77 Mark II done and the price was $25, 3 lb. pull and no creep!!!
__________________
Gotta Love The Smell Of A Good Rifle Powder!!! |
|
November 7, 2007, 07:39 PM | #9 |
Junior Member
Join Date: August 19, 2007
Posts: 2
|
remington model five trigger
Any one knows how to fix a remington model five trigger. Or any want know its mechanism?
|
November 20, 2007, 10:54 PM | #10 |
Senior Member
Join Date: July 9, 2004
Posts: 5,176
|
start a new thread, please.
Don't hijack this guy's thread. |
November 25, 2007, 04:01 PM | #11 |
Senior Member
Join Date: January 21, 2006
Location: Fresno, CA
Posts: 112
|
M77
I also have the M77, took it to the local gunsmith and costed me $35. I asked the guy if I could watch, he said I couldn't figure it out how but figured out that he shorten the spring pushing the trigger back a couple of coil. He figured it is around 7lbs pull. He wouldn't recomend going lower cause cold finger or a bump could easily set it off. Not sure of the Browning thou...
Ranger Al |
|
|