Do not hurt yourself laughing at me.

darknite · February 12, 2006, 06:28 PM

Hello room, I'm new here so please excuse any ignorance on my part. I am looking for an extended barrel for my Bersa .380. If you know where I can get the extended barrel for such an inexpensive weapon, please let me know. Thank you very much.

hpg · February 12, 2006, 06:43 PM

You might try ebay, good luck on that one. hpg

GlocksRfun · February 13, 2006, 12:16 AM

I'm kinda dssappointed. After reading the topic, I was assuming it would be an absolutly stupid, comical question and it turned out to be a good question. I've seen a post or 2 from members with 1,000's of posts that was... well.. u get the idea. Helping with questions like that is the kinda stuff TFL is all about, from what I have put together in my short time here. Welcome to TFL

Optical Serenity · February 13, 2006, 01:48 AM

Not sure where you will find the barrel, I hope you do, but what exactly are you trying to achieve?

Pinky Carruthers · February 13, 2006, 01:58 AM

Check www.yourgunparts.com. The site is owned by the same people that import the Bersa pistols.

hksigwalther · February 13, 2006, 09:34 PM

Welcome.

Where's the funny?

Snow Dog · February 14, 2006, 09:28 PM

Try these folks: http://www.barsto.com/category_main.cfm?ID=Beretta I don't know if they do them for your particular model but it never hurts to ask.

Eric Larsen · February 20, 2006, 08:46 AM

Ok.......I hurt myself

Shoot well.

darknite · March 25, 2006, 12:05 AM

Thank you all very much for your replies, they were very helpful. Unfortunately noone carries an extended barrel for this weapon though. No biggy, it's still a very good weapon.

JCC2 · March 27, 2006, 10:54 AM

I have a "mature" Bersa 383 DA model and the barrel is fixed (integral part of ) to the frame....so unless you want to change frames......

In anycase, great pistol, easy to shoot, accurate and very reliable.....

Stay safe,

Juan Carlos

February 12, 2006, 06:28 PM	#1
darknite Junior Member Join Date: February 12, 2006 Posts: 2	Do not hurt yourself laughing at me. Hello room, I'm new here so please excuse any ignorance on my part. I am looking for an extended barrel for my Bersa .380. If you know where I can get the extended barrel for such an inexpensive weapon, please let me know. Thank you very much.

February 12, 2006, 06:43 PM	#2
hpg Senior Member Join Date: September 14, 2002 Location: in the Bluegrass State Posts: 1,610	You might try ebay, good luck on that one. hpg __________________ NRA member Semper Paratus

February 13, 2006, 12:16 AM	#3
GlocksRfun Senior Member Join Date: January 30, 2006 Location: Wisconsin Posts: 423	I'm kinda dssappointed. After reading the topic, I was assuming it would be an absolutly stupid, comical question and it turned out to be a good question. I've seen a post or 2 from members with 1,000's of posts that was... well.. u get the idea. Helping with questions like that is the kinda stuff TFL is all about, from what I have put together in my short time here. Welcome to TFL Last edited by GlocksRfun; February 13, 2006 at 01:21 AM. Reason: had to re-word

February 13, 2006, 01:58 AM	#5
Pinky Carruthers Senior Member Join Date: December 2, 2004 Location: Rocky Mountains Posts: 649	Check www.yourgunparts.com. The site is owned by the same people that import the Bersa pistols. __________________ "Love lost, fire at will Dum Dum bullets and shoot to kill I hear dive bombers, and Empire down." SOM

February 13, 2006, 09:34 PM	#6
hksigwalther Senior Member Join Date: November 18, 1998 Location: NE OH, USA Posts: 3,198	Welcome. Where's the funny? __________________ - Ron V.

February 13, 2006, 01:48 AM	#4
Optical Serenity Senior Member Join Date: June 23, 2005 Location: Atlanta, GA Posts: 513	Not sure where you will find the barrel, I hope you do, but what exactly are you trying to achieve?

February 14, 2006, 09:28 PM	#7
Snow Dog Senior Member Join Date: August 6, 2005 Location: Too close to Toronto! Posts: 106	Try these folks: http://www.barsto.com/category_main.cfm?ID=Beretta I don't know if they do them for your particular model but it never hurts to ask.

February 20, 2006, 08:46 AM	#8
Eric Larsen Senior Member Join Date: December 5, 2001 Location: Bountiful....Ut. Posts: 3,226	Ok.......I hurt myself Shoot well. __________________ If they dont know you have a gun.....then I did alright! If you choose not to decide, you still have made a choice......Rush

March 25, 2006, 12:05 AM	#9
darknite Junior Member Join Date: February 12, 2006 Posts: 2	thank you ! Thank you all very much for your replies, they were very helpful. Unfortunately noone carries an extended barrel for this weapon though. No biggy, it's still a very good weapon.

March 27, 2006, 10:54 AM	#10
JCC2 Member Join Date: March 4, 2006 Posts: 33	Not easy.... I have a "mature" Bersa 383 DA model and the barrel is fixed (integral part of ) to the frame....so unless you want to change frames...... In anycase, great pistol, easy to shoot, accurate and very reliable..... Stay safe, Juan Carlos