|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
August 21, 2008, 03:13 PM | #1 |
Junior Member
Join Date: August 19, 2008
Posts: 2
|
Savage 110 stock replacemet
Hello to Everyone , I,m new to this site as of a couple days ago. I,m planing on changing the stock on my Savage and i,m just wondering if there,s any thing i should be aware of before i take it apart ? I,m just concerned about flying springs or internal clip parts that might become a problem. Thanks Night Call.
|
August 21, 2008, 06:07 PM | #2 |
Senior Member
Join Date: September 13, 2007
Location: Sunny Florida
Posts: 844
|
110
If it has a blind magazine, the spring and follower are under a small amount of spring tension. If it falls out it's easy to put back and you can't do it wrong. Other than that you're good to go.
|
August 21, 2008, 07:42 PM | #3 |
Junior Member
Join Date: August 19, 2008
Posts: 2
|
Savage 110 stock replacement
Thank you Sir.
|
Thread Tools | Search this Thread |
|
|