October 9, 2006, 10:00 PM | #1 |
Member
Join Date: December 24, 2004
Posts: 56
|
Winchester Model 97
I am looking for disassembly instructions for a Winchester Model 97 takedown
12 gauge. I have a printout from the Winchester web site, but it only tells how to remove the barrel and magazine tube. I still need instructions to disassemble the receiver parts. |
October 10, 2006, 05:24 AM | #2 |
Staff In Memoriam
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
|
Will need an email addy to accomplish your request
HJN |
October 10, 2006, 06:13 PM | #3 |
Member
Join Date: December 24, 2004
Posts: 56
|
email
|
October 11, 2006, 09:55 PM | #4 |
Member
Join Date: December 24, 2004
Posts: 56
|
Thanks
I got your email, Harley. I appreciate your help. Thank you.
|
October 12, 2006, 12:46 AM | #5 |
Staff In Memoriam
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
|
Most welcome
HJN |
August 2, 2007, 10:10 AM | #6 |
Junior Member
Join Date: August 2, 2007
Location: Loveland
Posts: 1
|
Winchester 1897 Takedown Instructions for Magazine Tube
I have a Model 1897 with a 2 cartridge "placeholder" in the magazine tube.
I would like to remove the plug. I have removed the barrel and magazine from the Receiver Group. I have removed two magazine plug screws from the magazine. I have not been able to successfully remove the magazine plug. Any help or advice you can give me would be greatly appreciated. |
Thread Tools | Search this Thread |
|
|