July 7, 2006, 02:29 PM | #1 |
Member
Join Date: June 30, 2006
Location: New England
Posts: 25
|
Digital Calipers
Any one have recommendations (or advice on brands to stay away from) I need a new Digital Caliper. I see Sinclairs has Mitutoyo's for $119. and Midsouth has Lyman for $34. And I'm sure Ebay has a bunch , I just don't want to buy one that is used and inaccurate or a POS that is new and inaccurate. Any advice?
__________________
Chris "V" |
July 7, 2006, 02:54 PM | #2 |
Senior Member
Join Date: December 2, 2004
Posts: 189
|
I have the Frankford Arsenal one and I love it. It's on Midway for around $27 I think.
|
July 7, 2006, 02:55 PM | #3 |
Senior Member
Join Date: May 13, 2006
Location: WA, the left armpit of the USA
Posts: 1,323
|
digital calipers
I bought a new digital from Midway when it was on sale. Seems to work fine so far. The brand is Insize. I got tired of squinting at dials, but before I gave away my old caliper I compared the two and the new one read the same as the old one only easier to see.
__________________
"If the enemy is in range, so are you." - Infantry Journal |
July 7, 2006, 03:03 PM | #4 |
Senior Member
Join Date: March 5, 2006
Location: SW Florida
Posts: 435
|
Mitutoyo is good.
I'm a Mechanical Engineer with a major Fortune 500 manufacturer (4000+ engineers) and digital Mitutoyo's are extremely common in both in the engineering areas and the shop. Mine has worked reliably for, lessee, 8 years now. It is calibrated each year, need it or not. Others are as good or better, I'm sure, but Mitutoyo's apparently are priced right.
__________________
Proud supporter of the NRA |
July 7, 2006, 03:10 PM | #5 |
Senior Member
Join Date: November 8, 2005
Location: Southern Commiefornia
Posts: 220
|
Frankford Arsenal works just fine for me. I think I got it on sale for $19.99 at midway a while back.
__________________
Learn to do right! Seek justice, encourage the oppressed. Defend the cause of the fatherless, plead the case of the widow. - Isaiah 1:17 |
July 7, 2006, 03:59 PM | #6 |
Senior Member
Join Date: August 13, 2005
Posts: 466
|
Even though a lot of electronic stuff has dropped considerably in price in the last few years, it hasnt dropped to the point where a $27 caliper is anywhere near as good as $119 one, you get what you pay for and no more. If you want to check the diameter of a nail or bolt to see if itis a 3/8" or 9/16" the $27 will do it fine, if you want to check bullet seating depth or case length, you might as well use a tape rule, it will be as close. The last digit on all calipers is the margin of error, i.e. least significant digit, most have a level of accuracy to the first 3 digits the good ones are accurate to the 4th digit remembering that the first digit is inches, the 3 digit one is only good to tens of thousanths of an inch the good ones are accurate to one thousanth of an inch, ( providing it is used properly and at a temperature near 60 degF).
It takes time and practice to use one properly and so buying the cheap one is going to compound the error, at least the decent one is getting you somewhere near. +1 on mjrodney and the mitutoyo
__________________
Better the man suspected of being a fool keep his mouth shut, than to open it and remove all doubt. |
July 8, 2006, 11:59 AM | #7 |
Senior Member
Join Date: August 8, 2005
Location: Arlington TX
Posts: 663
|
I bought the FA digital caliper from midway for ~$27 a couple of years ago. It reads to 3.5 decimal places (the 4th place is only 0 or 5).
I took it to work to a ME friend (I'm an EE), and had him test it against his Mitutoyo. It was within 0.0005 of the 'toyo. That was right after I bought it. I just took it in a month ago, and it was still within 0.0005", and the 'toyo had been checked/re-calibrated in between. Now I don't use mine nearly as often as he does, and mine probably has a kindler, gentler life, but for < 1/4 the price, I'd say my FA was a bargain, but it is only a sample of one. I'm not experienced enough to be able to use it to that much accuracy anyway (i.e. repeatability in technique, that's why I had _him_ test it), so why pay more for something I can't use? Buy what you want, but you don't always get more value by spending more. But if buying and using a Mitutoyo or Starrett gives you more confidence and improves your reloading/shooting/life, go for it. Andy |
July 8, 2006, 12:42 PM | #8 |
Junior member
Join Date: June 17, 2006
Location: Grand Island, NY
Posts: 73
|
I have a Mitutoyo digital and a Starrett mechanical. Use the Starrett almost exclusively. The zero on a mechanical is always where you set it. I've had the zero on the digital be off a couple of times causing a "problem" cuz I forgot to confirm the zero point. Any jaw opening can be a zero with the accidental touch of a button on a digital. Once locked in on the mech. it stays put. Just my $.02.
|
July 8, 2006, 12:59 PM | #9 | |
Senior Member
Join Date: December 2, 2004
Location: Murderapolis
Posts: 521
|
Just saw this new product offering in the latest Sinclair mini-flyer in the mail for $48.75 - looks decent:
Sinclair Digital Calipers 6 Inch Quote:
__________________
Tom. |
|
July 8, 2006, 01:19 PM | #10 |
Senior Member
Join Date: April 11, 2006
Location: Northeast Ohio
Posts: 3,403
|
Maybe a mechanical caliper?
The one that I've got was from www.grizzly.com and it works like a charm. No batteries required. Then again, I've got a micrometer that I inherited from my dad, so maybe I've just gotten used to the simpler things. Might explain why I like revolvers and leverguns as well.
|
July 8, 2006, 04:38 PM | #11 |
Member
Join Date: June 30, 2006
Location: New England
Posts: 25
|
That one looks very similar to these on ebay 200004529004
It's funny how they have one for $48. when all the stuff on Ebay is either $20 or $100 plus for the name brands. A friend at Sikorsky told me (for their quality control (far higher than mine I would think ) they generally use Mitutoyo, Starret or Brown & Sharp. They wont buy Fowler and never heard of Neiko. An ebay search on digital 6" calipers will make you head spin with $9. to $19. New in box calipers.
__________________
Chris "V" |
July 9, 2006, 10:43 AM | #12 | |
Senior Member
Join Date: January 17, 2002
Location: Upstate NY
Posts: 1,715
|
Quote:
__________________
"If you Listen to Fools, the Mob Rules" "No one has the answer, but one thing is true. You'e got to turn on evil, when its coming after you. You've gotta face it down,and when it tries to hide, you've got to go in after it, and never be denied. Time is running out...Let's roll. Let's roll for freedom, let's roll for love. We're going after satan, on the wings of a dove. Let's roll for freedom, let's roll for truth. Let's not let our children grow up fearful in their youth." |
|
July 9, 2006, 10:47 AM | #13 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
I bought a cheap Chinese-made one from Harbor Freight. $12 on clearance, IIRC.
Works like a champ, with the same kind of accuracy reported by dfaugh.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
July 9, 2006, 11:57 AM | #14 |
Member
Join Date: June 30, 2006
Location: New England
Posts: 25
|
I guess if you have a way to check them and you are religious about it (like before each use) {Kind of like setting up your balance beam scale} there should be no need to buy an industrial grade one.
__________________
Chris "V" |
July 9, 2006, 03:11 PM | #15 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
"I guess if you have a way to check them and you are religious about it..."
A couple of new US coins work well. They are very precise.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
July 10, 2006, 09:07 AM | #16 |
Senior Member
Join Date: January 17, 2002
Location: Upstate NY
Posts: 1,715
|
Mike Irwin,
Yeah, good tip. While I use the "mics", almost anything of known accuracy (I have spacing blocks, lathe cutters, end mills, and lots of other junk) can be used to make sure you're calipers are accurate.
__________________
"If you Listen to Fools, the Mob Rules" "No one has the answer, but one thing is true. You'e got to turn on evil, when its coming after you. You've gotta face it down,and when it tries to hide, you've got to go in after it, and never be denied. Time is running out...Let's roll. Let's roll for freedom, let's roll for love. We're going after satan, on the wings of a dove. Let's roll for freedom, let's roll for truth. Let's not let our children grow up fearful in their youth." |
July 10, 2006, 09:30 AM | #17 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
I found this list on a coin collecting website...
Lincoln cent = 19 mm Jefferson Nickel = 21.2 mm Roosevelt Dime = 17.9 mm Washington Quarter = 24.3 mm Kennedy Half Dollar = 30.6 mm A Silver or an Eisenhower Dollar = 38.1 mm Apparently the US mint works in metric...
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
|
|