July 2, 2014, 03:02 PM | #1 |
Senior Member
Join Date: July 1, 2013
Location: Douglasville, Ga
Posts: 4,615
|
lil gun and 300BLK
hey guys, need a little advice here on 300 blackout load
picked up some 155gr amax in hopes to use this lil gun i bought since it wont cycle with my subsonics, having a tough time finding a reliable starting point looks like i should start a little over 15gr but just want someone with some experience with 150ish grain bullets and lil gun, and also what is the safe max load 8,5in BBl 1/8 twist thanks!!
__________________
My head is bloody, but unbowed |
July 2, 2014, 03:59 PM | #2 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
Hodgdon's max listed load for lil'gun and 150gr Hornadys is 15.2gr
Based on that, your max should be right around 15.0.
__________________
Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley |
July 2, 2014, 04:13 PM | #3 |
Senior Member
Join Date: August 9, 2011
Posts: 1,293
|
Hornady's reloading manual list 11.8gr. minimal and 17.0gr. max with the 155 A-max
|
July 2, 2014, 04:26 PM | #4 |
Senior Member
Join Date: July 1, 2013
Location: Douglasville, Ga
Posts: 4,615
|
awesome guys, thanks alot. ill start about 14 and half and work up from there. i know better than to go too low on the spectrum with the semi auto's, they are so finicky
__________________
My head is bloody, but unbowed |
July 3, 2014, 09:20 AM | #5 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
As a point of information, QuickLoad agrees with Hornady, max at 17.0gr. I don't know if I'd go down to 11.8gr though, that's barely 60% case fill.
QuickLoad says 1736fps from 17.0gr in an 8.5" barrel. Very efficient load. Basically the best powder you could use.
__________________
Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley |
July 3, 2014, 11:14 AM | #6 |
Senior Member
Join Date: July 1, 2013
Location: Douglasville, Ga
Posts: 4,615
|
thanks brian, i was going to ask for a quikload but didnt want to be pushing it
THANKS!!
__________________
My head is bloody, but unbowed |
July 5, 2014, 04:07 AM | #7 |
Senior Member
Join Date: July 1, 2013
Location: Douglasville, Ga
Posts: 4,615
|
I settled on 15.8 gr, got to to shoot yesterday, pretty sweet groups at a hillbilly 30 yds. That thing kicks like a mule compared to the sub-sonics. But everything cycled well and bolt lockback. Thanks.
__________________
My head is bloody, but unbowed |
|
|