The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old April 14, 2008, 07:34 AM   #1
10 Spot Terminator
Senior Member
 
Join Date: January 3, 2008
Location: Central Oregon
Posts: 348
Looking For Load Data For .300 Wssm ,,, Anybody Loading This One ????

Thanks for resonding ,,,

My best friend just bought a Rem. 700 .300 WSM one tossand of course is looking for his best friend to conjur up the elusive "Magic Bullet" for him. Not one of my manuals has any load data for this one and of course I too would like some help finding that "Magic Bullet" with your help and maybe cut my load developement time down . Would very much appreciate any help at all you might give me on this one guys .
Thanks, 10 Spot

Last edited by 10 Spot Terminator; April 16, 2008 at 07:14 AM. Reason: one too many S's on cartrige, is a WSM
10 Spot Terminator is offline  
Old April 14, 2008, 04:58 PM   #2
steve4102
Senior Member
 
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,949
Do you really mean 300WSSM or does your friend have a 300WSM? If it is just a plain old WSM then there is lots of data out there. If your friend has a 300WSSM Wildcat then you may be in for a long search.

Anyhow here is data for the 300WSM.

http://www.ramshot.com/powders/

http://data.hodgdon.com/cartridge_load.asp

http://accuratepowder.com/data/Accur...ublication.pdf

http://www.alliantpowder.com/product...rs/300_WSM.htm

http://www.adi-limited.com/handloaders-guide/rifle.asp

http://www.lapua.com/fileadmin/user_...oguide2008.pdf

http://www.norma.cc/sortimentladd.as...0Magnum&Lang=2

http://www.nosler.com/index.php?p=15&b=30cal

http://www.reloadersnest.com/frontpa...?CaliberID=244

http://www.handloads.org/loaddata/de...Powder&Source=

Hope this helps. Also make sure that your friend doesn't have a Rem Short Action Ultra Mag or 300 SAUM for short.
steve4102 is offline  
Old April 14, 2008, 06:57 PM   #3
ForneyRider
Senior Member
 
Join Date: December 4, 2007
Location: Forney, TX
Posts: 725
Try any of the manuf's of reloading components for 300 WSM.

Winchester flyer has some loads.
__________________
When all is said and done, there is a lot more said than done.
ForneyRider is offline  
Old April 16, 2008, 07:21 AM   #4
10 Spot Terminator
Senior Member
 
Join Date: January 3, 2008
Location: Central Oregon
Posts: 348
Oops !!!! Darn Lisdexia !!!! Is A 300 Wsm !!!!

Thanks for findng my goof Steve .

Is a 300 WSM , Am looking for for some hands on load data for preferable 165 gr. bullets for this one if available from you viewers. Thanks again, 10 Spot
10 Spot Terminator is offline  
Old April 16, 2008, 07:33 AM   #5
steve4102
Senior Member
 
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,949
I load for three different 300WSM rifles. All three prefer Ramshot Hunter over anything else I have tried. 165gr Nosler Partition, Fed 215 or 215M, Norma Brass, 69gr Hunter.
I also like AA 4350 67.5gr and MagPro 77.5gr, same bullet etc.
steve4102 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05722 seconds with 10 queries