The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old October 19, 2012, 01:32 PM   #1
bull bob
Senior Member
 
Join Date: October 29, 2010
Location: Michigan
Posts: 114
powder measure parts

So I had a little accident as I was cleaning out my RCBS Uniflow powder measure. Slipped out of my hands and smacked the side of the bench. Not totally broken, but cracked. Can I get a replacement? I'm at work now and have limited access to web sites, (darn filters), so I can't get to RCBS directly. Anyone ever have a problem like this?
bull bob is offline  
Old October 19, 2012, 01:40 PM   #2
rox
Member
 
Join Date: October 4, 2012
Posts: 81
I'm in the process of ordering a bunch of parts for RCBS measures, including hoppers, baffles, lids etc. You can find the part number you need from the instructions here or the Parts Book here, then contact RCBS via the form here or at 1-800-533-5000.

Edit: Seeing that you don't have web access, the part that I *think* you need is:
09026 Powder Hopper (to fit a Uniflow Powder Measure, 09010) but please check!
..

Last edited by rox; October 19, 2012 at 01:45 PM.
rox is offline  
Old October 19, 2012, 03:31 PM   #3
stu925
Senior Member
 
Join Date: December 20, 2010
Location: New York
Posts: 953
Call RCBS and tell them what happened, I'd be surprised if they didn't send you the parts you need for free. They have amazing customer service.

Stu
stu925 is offline  
Old October 19, 2012, 03:36 PM   #4
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,585
RCBS has the best CS, that I have ever dealt with, Ditto what Stu and Rox said.
__________________
Keep your Axe sharp and your powder dry.
hooligan1 is offline  
Old October 19, 2012, 07:40 PM   #5
michaelcj
Senior Member
 
Join Date: June 15, 2011
Location: Lopez Island, WA
Posts: 279
Double Ditto: They sent me replacements for two vintage uniflows [you remember the old almost O.D Green color]. No charge /no shipping / no questions.

MJ
michaelcj is offline  
Old October 20, 2012, 05:32 AM   #6
dickttx
Senior Member
 
Join Date: May 29, 2011
Location: Fort Worth
Posts: 500
I bought a Uniflow at an estate sale that was missing several parts. E-mailed them and they sent all at no cost.
__________________
Education teaches you the rules, experience teaches you the exceptions (Plagiarized from Claude Clay)
dickttx is offline  
Old October 20, 2012, 06:46 AM   #7
hAkron
Senior Member
 
Join Date: March 31, 2011
Location: Akron, Ohio
Posts: 318
I concur with what others have stated. A call to RCBS will probably get your problem solved quickly, and for free.

tel:1-800-533-5000
hAkron is offline  
Old October 21, 2012, 12:36 PM   #8
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
Quote:
I bought a Uniflow at an estate sale that was missing several parts. E-mailed them and they sent all at no cost.
I tried that with some dies I got in a similar fashion and got turned down! They said lost is not a failed part. I'm still green all the way though.
Edward429451 is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05243 seconds with 8 queries