The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old December 31, 2010, 01:28 AM   #1
ethan95
Senior Member
 
Join Date: September 6, 2010
Location: NJ
Posts: 169
Old unwanted brass disposal

I have some old unwanted brass, what should i do with it? If i de-prime it can i take it to a junk yard? Its mostly in .223 and .308 and has seen its fair share of reloading, some of its just been replaced with newer better brass. Any suggestions of ways to get rid of it?

P.S:Im sorry if there was another thread on this but i couldn't find it in the archives.
__________________
Μολὼν λαβέ
ethan95 is offline  
Old December 31, 2010, 01:36 AM   #2
dawico
Senior Member
 
Join Date: October 18, 2009
Location: Lampasas, TX
Posts: 326
A scrapyard should be able to buy it from you, and you may not have to deprime it first either. Call and ask them (some gun ranges scrap leftover cases), but you will probably spend more in gas than you will get for it.
dawico is offline  
Old December 31, 2010, 01:36 AM   #3
rg1
Senior Member
 
Join Date: November 6, 2001
Posts: 1,125
Mine goes to the recycler that also takes aluminum cans. I don't deprime and the recycler takes them. Don't know what recycled brass goes for now but you'll get some return on your spent brass. I'd check first to see if your recycler has a problem with unprimed cases.
rg1 is offline  
Old December 31, 2010, 01:41 AM   #4
ethan95
Senior Member
 
Join Date: September 6, 2010
Location: NJ
Posts: 169
Thanks for the responses. I gotta call some yards in the morning and see what they say. Nothing like stumbling into the basement at 6am and stepping barefoot onto a .223 casing. Thanks again, Ethan.
__________________
Μολὼν λαβέ
ethan95 is offline  
Old December 31, 2010, 06:42 AM   #5
Incognito
Senior Member
 
Join Date: May 19, 2008
Location: Colorado, USA
Posts: 370
Yeah, don't throw that away. Around here, copper & brass goes for around $1.25 a pound.
Incognito is offline  
Old December 31, 2010, 07:06 AM   #6
DiscoRacing
Senior Member
 
Join Date: December 19, 2008
Location: milton, wv
Posts: 3,640
'Pends on the scrap yard here... some will take it and some wont.
__________________
Desert Eagle Alliance Group Launcher Extraordinaire ______
----Get Busy Live'n.....Or....Get Busy Die'n......Red
-------They call me Dr. Bob,,,, I have a PhD in S&W
DiscoRacing is offline  
Old December 31, 2010, 07:59 AM   #7
Spur0701
Senior Member
 
Join Date: February 2, 2005
Posts: 208
I keep a 5 gallon bucket for recycling brass, it mostly gets berdan primed mil-surp empties, when it's mostly full and I'm going by that way I stop at the recyclers and usually get $50 or $60 for a 2/3 full bucket......no need to remove primers. One recycler gives me a hard time if there's any nickel plated stuff in there, but another doesn't care.
Spur0701 is offline  
Old December 31, 2010, 10:06 AM   #8
demigod
Junior member
 
Join Date: March 13, 2008
Location: AZ
Posts: 1,129
Yep. Find a good scrap joint around you. Be careful with little operations. They'll try to pick you off and give you half the fair market. Brass should be bringing close to $2 per lb with the way copper has been screaming.
demigod is offline  
Old December 31, 2010, 10:21 AM   #9
rdmallory
Senior Member
 
Join Date: February 10, 2009
Location: Deltona FL
Posts: 953
I trade my at Scharch.

www.scharch.com

$1.75 lb credit and you can ship it in a USPS flat rate box.

Dogu
rdmallory is offline  
Old December 31, 2010, 12:08 PM   #10
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
Rimfire?

Does rimfire brass get the same price per pound at the scrap yards?

At my club's range we're responsible for our own clean up. I've been putting my swept up RF into the trash. If the stuff is worth $10 a gallon, I'll keep it.
zippy13 is offline  
Old December 31, 2010, 12:57 PM   #11
wncchester
Senior Member
 
Join Date: December 1, 2002
Posts: 2,832
Let's see...how can I discard something I no longer want; take it to a recycler or put it in the trash? What to do, what to do....
wncchester is offline  
Old December 31, 2010, 02:07 PM   #12
Wildalaska
Junior member
 
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,172
Todays scrap brass is tomorrows new brass.

I dont care about whether or not its good for the planet, since we will be all buried under a tectonic plate in 50 million years, but rather, its good for the economy.

If you are too lazy to take it to a recycler or too worried about getting ripped off by $1 a pound on it I guess I reckon that the word personal responsiblility need not apply to you. If its no good to you and you dont have throw it out.....?

WildjustathoughtAlaska ™©2002-2010
Wildalaska is offline  
Old December 31, 2010, 03:08 PM   #13
demigod
Junior member
 
Join Date: March 13, 2008
Location: AZ
Posts: 1,129
Quote:
Does rimfire brass get the same price per pound at the scrap yards?
Yep. No difference with rimfire.
demigod is offline  
Old December 31, 2010, 03:13 PM   #14
demigod
Junior member
 
Join Date: March 13, 2008
Location: AZ
Posts: 1,129
Quote:
Todays scrap brass is tomorrows new brass.
Today's Berdan primed junk is tomorrow's Boxer primed gold!
demigod is offline  
Reply

Tags
brass , disposal , unwanted

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07370 seconds with 8 queries