|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 15, 2006, 10:40 PM | #1 |
Junior Member
Join Date: March 15, 2006
Posts: 2
|
9 MM Loads for Target Shooting
What is the minimum and maximum loads I can use for reloading 9MM with 125 gr lead RN and Bullseye powder? This would be for target load only.
Your comments are appreciated. Al |
March 15, 2006, 10:44 PM | #2 |
Senior Member
Join Date: March 21, 2005
Location: NJ
Posts: 1,265
|
my suggestion would be to use a good reputable reloading manual for that. Taking advice over the internet is not a good idea. You could be seriously hurt in the process
It would also depend quite a bit on the gun you have as well. I would not recommend hitting top end loads with older guns or guns not in good condition.
__________________
CZ 75B Stainless Beretta PX4 F Series 9mm & U22 Neos 6" black S&W Shield 9mm |
March 16, 2006, 10:40 AM | #3 |
Senior Member
Join Date: July 1, 1999
Location: Iowa
Posts: 2,135
|
__________________
Go NRA |
Thread Tools | Search this Thread |
|
|