|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 17, 2010, 11:04 AM | #1 |
Junior member
Join Date: December 31, 2008
Location: youngsville nc
Posts: 195
|
what type of finish do rugers carry ?
ok i have tackled the job of refinishing the barrle on my ruger security six . a have noticed that most rugers always look a bit different . i just finished a spanish 32-20 revolver but i stripped and reblued the whole gun with the birchwood casey kit, it looks decent but i tried to spot the ruger barrel and boy it looks like hell . would i be better off sending it out and would it be cost effective to do so on a 400.00 gun ? it has major pitting but i have wet sanded 99% of it out . im no pro but i know enough to properly f somthing up !
|
December 17, 2010, 02:48 PM | #2 | |
Senior Member
Join Date: August 8, 2009
Posts: 477
|
My own general rule is, if you can't or wont find the info direct from the factory, then send it in.
Since you can't or won't look rugers website, I recommend sending it in. http://www.ruger.com/service/serviceFees.html Quote:
Last edited by hickstick_10; December 17, 2010 at 03:12 PM. |
|
December 17, 2010, 03:16 PM | #3 |
Junior member
Join Date: December 31, 2008
Location: youngsville nc
Posts: 195
|
well i figured since i had messed up i would go ahead and mess it up right ! lol .i stripped down just the barrel with 1000 grit and blued it , steel wool , blued it again and it came out right nice , i polished out all of the pits , not factory but it will work
|
December 17, 2010, 03:18 PM | #4 |
Senior Member
Join Date: February 25, 2009
Posts: 566
|
No pictures? Thread tease.
Show us how it came out; somebody might be inspired. |
December 17, 2010, 03:18 PM | #5 |
Senior Member
Join Date: January 19, 2009
Location: WI
Posts: 1,162
|
Hows about some pics?
|
December 18, 2010, 12:59 AM | #6 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
It's some kind of paint-like finish on my GP-100. Not normal bluing. Thick and black.
Used a vinegar based home made leather dye on a holster. Didn't wait long enough for it to dry. The finish was eaten right to bare metal. Cold bluing covered it, but it's not the same.
__________________
Spelling and grammar count! |
|
|