|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 6, 2017, 12:46 PM | #26 |
Senior Member
Join Date: December 27, 2010
Posts: 211
|
Not sure. Does the trigger engage the half cock slot?
|
January 6, 2017, 01:03 PM | #27 |
Junior Member
Join Date: January 5, 2017
Posts: 13
|
I can feel the trigger sear hit the half cock notch, but the hammer forces the trigger backwards and out of the notch.
|
January 6, 2017, 02:49 PM | #28 |
Senior Member
Join Date: December 27, 2010
Posts: 211
|
Clean off both hammer and trigger. Smear a small dab of grease on trigger where it touches hammer. Assemble and work action. Disassemble and look for tell-tale fingerprint.
|
January 6, 2017, 05:36 PM | #29 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
You can do the same with a felt marker.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
January 7, 2017, 09:47 AM | #30 |
Senior Member
Join Date: February 24, 2013
Posts: 584
|
I like lay out blue.
|
January 7, 2017, 02:53 PM | #31 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
Good point. One pass with an acetone rag and it's clean.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
|
|