The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old December 9, 2008, 01:15 AM   #701
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
what about a model 10-6 ? "C6585xx" on the butt & "D039xx" in front of the cylinder - just noticed that tonight. are non matching numbers unusual?
C6585XX = 1963/64.
When you say D039XX is in front of the cylinder are you refering to it's stamped on the frame or on the actual cylinder?

Jim
laytonj1 is offline  
Old December 9, 2008, 02:00 AM   #702
turbo_burt
Junior Member
 
Join Date: December 9, 2008
Location: florida
Posts: 7
thank you very much - '63 or '64 sounds like good years for +P ammo

Quote:
When you say D039XX is in front of the cylinder are you refering to it's stamped on the frame or on the actual cylinder?
its "on the yoke" below the model # , only visible with cylinder in the open position
turbo_burt is offline  
Old December 9, 2008, 02:18 AM   #703
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
its "on the yoke" below the model # , only visible with cylinder in the open position
That's an assembly number. And +P is okay.

Jim
laytonj1 is offline  
Old December 9, 2008, 09:42 PM   #704
ksb64
Junior Member
 
Join Date: June 10, 2008
Location: montreal canada
Posts: 3
help with serial #

Hi there
would like to know the build date and value of my s&w 27-3 6in
serial # aus 6877

thank in advance

Last edited by ksb64; December 9, 2008 at 09:49 PM.
ksb64 is offline  
Old December 9, 2008, 10:07 PM   #705
KD5NRH
Senior Member
 
Join Date: August 25, 2006
Location: Stephenville TX
Posts: 176
While we're on the subject, I have an older 4" K frame I've been curious about. Markings are as follows:

Left Side:
Barrel: SMITH & WESSON
Yoke and crane: 38190
Below cyl release: S&W Trademark logo
Right Side:
Barrel: 38 S.&W. SPECIAL CTG
Frame: MADE IN U.S.A.
Top:
Barrel: SMITH & WESSON SPRINGFIELD MASS. U.S.A (no period visible after the "A")
PATENTED FEB. 6, 06, SEPT. 14, 09, DEC. 29, 14
Butt: 582xxx (in different, poorly aligned stamping: 6683)
Cylinder face: same 582xxx as butt.
KD5NRH is offline  
Old December 10, 2008, 12:27 AM   #706
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
would like to know the build date and value of my s&w 27-3 6in
serial # aus 6877
1987. In minty condition... ~$500+

Quote:
Left Side:
Barrel: SMITH & WESSON
Yoke and crane: 38190
Below cyl release: S&W Trademark logo
Right Side:
Barrel: 38 S.&W. SPECIAL CTG
Frame: MADE IN U.S.A.
Top:
Barrel: SMITH & WESSON SPRINGFIELD MASS. U.S.A (no period visible after the "A")
PATENTED FEB. 6, 06, SEPT. 14, 09, DEC. 29, 14
Butt: 582xxx (in different, poorly aligned stamping: 6683)
Cylinder face: same 582xxx as butt.
You have a 38 Military and Police Model of 1905, 4th Change.
They were made from 1915 at SN 241704 thru 1942 at SN 1000000.
With your SN of 582XXX I'm guessing 1920's.

Jim

Last edited by laytonj1; December 10, 2008 at 12:33 AM.
laytonj1 is offline  
Old December 10, 2008, 07:07 AM   #707
ksb64
Junior Member
 
Join Date: June 10, 2008
Location: montreal canada
Posts: 3
thanks
ksb64 is offline  
Old December 10, 2008, 11:28 PM   #708
conrad carter
Member
 
Join Date: November 30, 2007
Posts: 30
OK

I recently purchased a M 19-6 BFY 302X.
and a 651-1 CBY 073X
I believe they are from the late 80's.
What do they tell you?
conrad carter is offline  
Old December 11, 2008, 06:38 PM   #709
milspec45
Junior Member
 
Join Date: December 5, 2008
Posts: 12
I put a Smith mdl 37 airweight on layaway today. I'm very excited about this little dude. I'll probably pick it up tomorrow! Can you help with the year it was made and whether +p is okay in this?

ser # is 408xxx..

Thanks!

Best regards,

Chuck
milspec45 is offline  
Old December 11, 2008, 08:42 PM   #710
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I recently purchased a M 19-6 BFY 302X.
and a 651-1 CBY 073X
BFY302X = Jan. 1991
CBY073X = ~Sep 1997

Quote:
I put a Smith mdl 37 airweight on layaway today. I'm very excited about this little dude. I'll probably pick it up tomorrow! Can you help with the year it was made and whether +p is okay in this?

ser # is 408xxx..
295000 started 1962 till 786544 at 1969, so about 1965ish.
Because it's a alloy frame it is not recommended for +P. However, many folks have used +p with no ill effects.

Jim

Last edited by laytonj1; December 11, 2008 at 09:01 PM. Reason: spelling
laytonj1 is offline  
Old December 11, 2008, 09:02 PM   #711
milspec45
Junior Member
 
Join Date: December 5, 2008
Posts: 12
Thanks Jim...the darn thing is almost as old as I am...

Blessings my friend and thanks for the info!!
milspec45 is offline  
Old December 12, 2008, 12:46 AM   #712
conrad carter
Member
 
Join Date: November 30, 2007
Posts: 30
Thank you. I enjpoyed the 90's and am glad a couple of its guns caught up to me. I'd bet you have a handkerchief near by when you sit down to date the guns here. Much appreciated.
conrad carter is offline  
Old December 12, 2008, 03:50 PM   #713
fourdegrees11
Member
 
Join Date: December 8, 2008
Posts: 23
I could use help with my gun serial # N626xxx. I'm not sure on the exact model because the gun was heavily modified prior to my purchase
fourdegrees11 is offline  
Old December 12, 2008, 04:04 PM   #714
oklahoma mick
Junior Member
 
Join Date: December 12, 2008
Posts: 5
pre war m and p

serial 139xxx six inch bar was reading my new g and a saw old smith and said hey ive got one of those was my dads good shooter, any idea on what it might be worth?
oklahoma mick is offline  
Old December 12, 2008, 05:03 PM   #715
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I could use help with my gun serial # N626xxx. I'm not sure on the exact model because the gun was heavily modified prior to my purchase
1979/80. The model number should be stamped on the frame just forward of the cylinder. You'll have to open the cylinder to see it.

Quote:
serial 139xxx six inch bar was reading my new g and a saw old smith and said hey ive got one of those was my dads good shooter, any idea on what it might be worth?
38 M&P model of 1905, 1st change. Made from 1906 to 1909. Value depends on condition.

Quote:
my new g
What is that?
Jim
laytonj1 is offline  
Old December 13, 2008, 10:44 AM   #716
KD5NRH
Senior Member
 
Join Date: August 25, 2006
Location: Stephenville TX
Posts: 176
Quote:
You have a 38 Military and Police Model of 1905, 4th Change.
They were made from 1915 at SN 241704 thru 1942 at SN 1000000.
With your SN of 582XXX I'm guessing 1920's.
Thanks. That's in line with what I was guessing. Unfortunately, granddad didn't leave much in the way of notes, so all I know is that he was pretty accurate with it, and it still shoots great. I keep it on a diet of relatively light loads, and clean it well after each range trip, as I suspect he did, (I sometimes think he shot mostly to have an excuse to clean and oil the guns again) so the finish still looks good.
KD5NRH is offline  
Old December 14, 2008, 10:34 AM   #717
wannalearn
Junior Member
 
Join Date: December 14, 2008
Posts: 4
Hi everyone, new here just registered. Doing a search on a piece that is old for me. I got it after my father-in-law passed away. Hope you can help. Its a Smith&Wesson 22 long rifle 6 inch revolver 279xxx Thanks in advance. "wannalearn".
wannalearn is offline  
Old December 14, 2008, 01:03 PM   #718
LH2
Senior Member
 
Join Date: September 19, 2005
Location: Arizona
Posts: 635
DOB?

Just picked up a 3913, s/n VJN89XX, stamped, not laser etched. Anybody know the DOB for this one? Thanks!
__________________
* Browning Hi-Power | Buck Mark * S&W 3913 NL | 3914 TSW | 442-1 * Kel-Tec P32 * Glock 19 | 26 * Ruger SP101 * Remington 870P * CZ 452 * Arsenal SGL-21 * AMD-65 * AK-74 *
LH2 is offline  
Old December 14, 2008, 02:34 PM   #719
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Hi everyone, new here just registered. Doing a search on a piece that is old for me. I got it after my father-in-law passed away. Hope you can help. Its a Smith&Wesson 22 long rifle 6 inch revolver 279xxx Thanks in advance. "wannalearn".
"K" 279XXX would be 1956. Known as the "K22 Masterpiece" they went on to become the Model 17 when S&W started assigning model numbers in 1958.

Quote:
Just picked up a 3913, s/n VJN89XX, stamped, not laser etched. Anybody know the DOB for this one? Thanks!
Unfortunantly, the "book" only covers their auto pistols up to 1998. A call to S&W customer service will get you a DOB over the phone for free.

Jim

Last edited by laytonj1; December 14, 2008 at 02:40 PM.
laytonj1 is offline  
Old December 14, 2008, 08:14 PM   #720
wannalearn
Junior Member
 
Join Date: December 14, 2008
Posts: 4
thanks Jim for the info.
wannalearn is offline  
Old December 15, 2008, 09:47 AM   #721
LocalFireMedic
Junior Member
 
Join Date: December 15, 2008
Posts: 1
S&W Model 657

Just getting into pistols and bought a stainless 41 mag model 657, SN# AVA 2033. Any info you guys could tell me about it I would greatly appreciate
LocalFireMedic is offline  
Old December 15, 2008, 02:52 PM   #722
yosemitesamaz
Member
 
Join Date: December 15, 2008
Location: az.
Posts: 68
can any one help out finding the date on a s&w 38/44 heavy duty serial s 941xx
yosemitesamaz is offline  
Old December 15, 2008, 05:12 PM   #723
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Just getting into pistols and bought a stainless 41 mag model 657, SN# AVA 2033.
1987. Built on S&W's "N" frame.

Quote:
can any one help out finding the date on a s&w 38/44 heavy duty serial s 941xx
1953.

Jim
laytonj1 is offline  
Old December 15, 2008, 06:32 PM   #724
yosemitesamaz
Member
 
Join Date: December 15, 2008
Location: az.
Posts: 68
thanks for the info
yosemitesamaz is offline  
Old December 15, 2008, 06:38 PM   #725
BLK08ROCKERC
Member
 
Join Date: December 1, 2008
Location: Middle GA
Posts: 27
Hey I've got tw that I would like some info on. Any info would be greatly appreciated!!

1. Model 10-7 4" Serial # 3D50xxx

2. Model 28-3 6" Serial# N955xxx

Thanks in advance!!
BLK08ROCKERC is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.48970 seconds with 9 queries