January 21, 2009, 10:13 PM | #1 |
Senior Member
Join Date: December 23, 2008
Location: Southern Illinois
Posts: 1,527
|
WinClean Brass
I found some WinClean .45ACP rounds in the bottom of the closet. Has anyone reloaded this brass before? I know these use small pistol primers, but does this affect burnrate or amount of powder to use. I use titegroup, so if anyone has any experience, I would appreciate the help. Thanks guys!
__________________
~~IllinoisCoyoteHunter~~ ~NRA LIFE MEMBER~ ~NRA CERTIFIED INSTRUCTOR~ |
January 21, 2009, 11:55 PM | #2 |
Senior Member
Join Date: July 11, 2008
Location: FL
Posts: 570
|
Your question has appeared several times on this and othe forums. Yes, you can reload the small primer 45acp brass made by Winchester, Federal and probably others. I do not recall where I read this, but you can use your usual 45acp recipe for reloading this SP brass. You will "suffer" approximately 30fps less velocity due to use of the SP.
|
January 22, 2009, 08:10 AM | #3 |
Senior Member
Join Date: April 27, 2007
Location: New Jersey
Posts: 234
|
Load it. I use the same charge in it as in the lg primer. It shoots just fine.
|
|
|