need help-Dimensions of 243-308 detachable box magazines

mncarpenter · November 23, 2009, 09:50 AM

Is there anyone with M14 mags, FN FNAR mags or similar mags that can get accurate dimensions for me? I need length(fore/aft) and width(side to side).
Calibers needed are the derivatives of 308- if I've been confusing re: the dimensions I need see attached pic- I've scoured the 'net for dimension and have dimensions for Ar-10 mags, FAL mags.
Other possibles are Remington 750/742,BAR Stalker, BAR MK2,any bolt rifles w/ detachable box mags, etc. In other words any available mags..
-Thank you in advance for any help

tINY · November 23, 2009, 02:43 PM

M14 mag body: 2.99" front to rear x 0.925 (front) and 1.03" (rear)

G3 mag body : 2.96" x 1.05" (with the upper part the goes into the mag-well slightly larger)

-tINY

mncarpenter · November 24, 2009, 04:11 AM

Thank you tINY, I appreciate your help. Helps me with what mags I can consider or rule out for a conversion kit I'm working on . If this works out , will post updates in near future.

mncarpenter · December 12, 2009, 06:42 AM

I still need dimensions for an FN FNAR mag-any help would be appreciated, thanks

November 23, 2009, 02:43 PM	#2
tINY Senior Member Join Date: April 26, 2005 Location: Orygun Posts: 2,589	M14 mag body: 2.99" front to rear x 0.925 (front) and 1.03" (rear) G3 mag body : 2.96" x 1.05" (with the upper part the goes into the mag-well slightly larger) -tINY

November 24, 2009, 04:11 AM	#3
mncarpenter Junior Member Join Date: August 18, 2009 Posts: 5	Thank you tINY, I appreciate your help. Helps me with what mags I can consider or rule out for a conversion kit I'm working on . If this works out , will post updates in near future.

December 12, 2009, 06:42 AM	#4
mncarpenter Junior Member Join Date: August 18, 2009 Posts: 5	I still need dimensions for an FN FNAR mag-any help would be appreciated, thanks